User guide

Function
25
1. Press the MENU button and then use F, G button to select the menu.
2. Press the D , E button to select Auto sleep item.
3. Press the
F, G button to select the desired preset time.
●
To exit the menu display, repeatedly, press the MENU button.
Auto sleep Function
Presentation timer Function
* This function turns the projector off automatically after the preset time is passed
when there is no signal.
Language
ARC
Overscan
Flip horizontal
Flip vertical
Sleep time
Auto sleep
Set ID
Presentation timer
FG
English
FG
4 : 3
FG
1
MENU Prev. Move Select
D
E
FG
FG
Off
FG
Off
FG
Off
FG
Off
Language
ARC
Overscan
Flip horizontal
Flip vertical
Sleep time
Auto sleep
Set ID
Presentation timer
FG
English
FG
4 : 3
FG
1
FG
Off
FG
Off
FG
Off
FG
Off
MENU Prev. Move OK
D
E
Off 10 Min 20 Min 30 Min 60 Min
240 Min
180 Min 120 Min 90 Min
Time alarm
Time Keeper
FG
Off
FG
Off
MENU Exit Move Select
D
E
FG
1. Press the MENU button and then use F, G button to select the menu.
2. Press the D , E button to select Presentation timer item.
3. When window below appears, select
Time alarm or Time keeper item.
4. Press the
F, G button to select the desired preset time.
5. The timer starts to operate if you select specific time.
●
Time alarm function : If you select a specific time, it is displayed in minute
units. After 1 minute, the remaining time is displayed at the bottom right of the
screen, and then disappears after 5 seconds. When the remaining time is dis-
played, other OSD windows are closed. When the set time is reached. ‘0
minute’ flickers 10 times at 1 second intervals, and then disappear.
●
Time keeper function : If you select a specific time, it continues to be dis-
played in minute(‘) and second(“) units. Even though other OSD windows
appear, the remaining time is displayed again after the windows are closed.
When the set time is reached,0’00” flickers 10 times at 1 second intervals, and
then disappears.
6. If the set time disappears because of the use of other menus, press the Timer
button on a remote control to display the set time again.
●
The Time alarm function and the Time keeper function cannot be used at
the same time.
●
The Time alarm function can be set from 5 to 60 minutes at 5 minute inter-
vals (Off, 5, 10, 15, 20, .........., 55, 60 minutes).
●
The Time keeper function can be set from 1 to 10 minutes at 1 minute inter-
vals, and from 10 to 60 minutes at 5 minute intervals (Off, 1, 2, 3, 4, ..., 8, 9,
10, 15, 20, 25, .........., 55, 60 minutes).
●
Press the MENU button to exit the menu screen.