HT353SD Installation and Operating Guide | Warranty Model Number | DVT812 | ( M a i n S e t : DVT812,Speakers: SH33SD-S,SH33SD-W) | DVD/CD Receiver For service/ support Call: Toll Free Number 1-877-9-ZENITH (http://www.zenithservice.com) R © Copyright 2008, LG Electronics U.S.A., Inc.
CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
IMPORTANT SAFETY INSTRUCTIONS ENGLISH CAUTION: PLEASE READ AND OBSERVE ALL WARNINGS AND INSTRUCTIONS IN THIS OWNER’S MANUAL. AND THOSE MARKED ON THE PRODUCT. RETAIN THIS MANUAL FOR FUTURE REFERENCE. This product has been designed and manufactured to assure personal safety. Improper use can result in electric shock or fire hazard. The safeguards incorporated in this product will protect you if you observe the following procedures for installation, use, and servicing.
QUICK SETUP GUIDE Speaker System Connection Connect the speaker wires the speaker terminals. To obtain the best possible surround sound, adjust the speaker parameters (volume, distance, etc.). Notes: Be sure to match the speaker wires to the appropriate terminal on the components, + to + and – to –. If the cables are reversed, the sound will be distorted and will lack bass. If you use front speakers with low maximum input rating, adjust the volume carefully to avoid excessive output on the speakers.
Installation Types of Playable Discs Before Use . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5 TV Connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6 Antenna Connection . . . . . . . . . . . . . . . . . . . . . . . . .6 Speaker System Connection . . . . . . . . . . . . . . . . . .6 Optional Equipment Connection . . . . . . . . . . . . . . .
Installation Do not touch the inner pins of the jacks on the rear panel. Electrostatic discharge may cause permanent damage to the unit. Be careful of the following • Be careful to make sure children not to put their hands or any objects into the speaker duct. • Speaker duct : A hall for plentiful bass sound on speaker cabinet (enclosure ) TV Connection Make one of the following connections, depending on the capabilities of your existing equipment.
1 2 3 4 12 5 6 7 11 10 8 9 Operate using the Front Panel 1. ( /[)POWER button Lights red when the receiver is in Standby mode (off) 2. DISC Tray 3. DISPLAY Window 4. Remote Sensor:RemoteControl Operation Range Distance: About 23 ft (7 m) from the front of the Remote Sensor Angle: About 30° in each direction in front of the Remote Sensor 5. OPEN/CLOSE Opens and closes the disc tray. 6. • (B/X)PLAY/PAUSE • FUNC.
Each time you press the button, the DVD/CD Receiver tunes in one preset station at a time. Preset radio stations in the DVD/CD Receiver’s memory first (see “Presetting radio stations”) TUN.(-/+) (b/B) For manual tuning, press TUN (-/+) repeatedly. For automatic tuning, press and hold TUN. (-/+) for about two seconds on the front panel. 14. SCAN(bb/BB) During playback, press SCAN (m or M) repeatedly to select the required scan speed.
Setup By using the Setup menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the Setup menu, among other things. For details on each Setup menu item, see the pages 9 to 10. a b c d e a LANGUAGE - Menu Language/ Disc Audio / Subtitle / Menu b DISPLAY - TV Aspect / Display Mode / Progressive Scan c AUDIO - 5.
LOCK (Parental Control) 1. Press SETUP to display the Setup menu. Rating: Blocks playback of rated DVDs based on their contents. Not all discs are rated. 2. Input the 6-digit number “210499” and press ENTER. The password is cleared. 1. Select “Rating” on the LOCK menu then press B. Area Code 2. To access the LOCK options, you must input the password you have created. If you have not yet entered password, you are prompted to do so. Input a password and press ENTER.
2. Select a track on the “List”, and then press PROG./MEMO.“ ” icon appears on the display window and then press ENTER to place the selected track on the “Program” list. Repeat to place additional tracks on the list. 3. Select the track you want to start playing on the “Program” list. Press MENU to move to the next page. 4. Press PLAY or ENTER to start. Playback begins in the order in which you programmed the tracks. Playback stops after all of the tracks on the “Program” list have played once. 5.
Reference Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Troubleshooting Symptom No power. Cause • The power cord is disconnected. • The video cable is not connected securely. • The connected TV power is turned off. • The equipment connected with the audio cable is not set to receive DVD signal output. • The audio cables are not connected securely. • The power of the equipment connected with the audio cable is turned off. • The audio connecting cable is damaged. Correction • Plug the power cord securely into the wall outlet. • Insert a disc.
MP3 / WMA disc compatibility with this player is limited as follows: • Sampling frequency: within 8 - 48 kHz (MP3), within 22.05 - 48kHz (WMA) • Bit rate: within 8 - 320kbps (MP3), 32 - 256kbps (WMA) Support Ver : v2 , v7, v8, v9 • File extensions: “.mp3” / “.wma” • CD-ROM file format: ISO9660 • We recommend that you use Easy-CD Creator, which creates an ISO 9660 file system.
Zenith Electronics, Inc. Limited Warranty - USA This Zenith Electronics product, will be repaired or replaced, at Zenith’s option, if it proves to be defective in material or workmanship, under normal use, during the warranty period (“Warranty Period”) listed below, effective from the date (“Date of Purchase”) of original consumer purchase of the product. This warranty is good only to the original purchaser of the product and effective only when used in the United States, excluding U.S. Territories.
