User guide

ManualsBrandsLG Electronics ManualsDVD PlayerDRH-5600x

Checking Timer Recording Details

Programming can be checked whenever the recorder

is turned on.

Select [Timer Record] option in the [HOME] menu.

The [Timer Record List] menu will appear.

 Use v / V to select a timer recording.

 Press ENTER to edit the selected program.

Timer Record menu appears.

 Press CLEAR to delete the selected program

from the Timer Record List.

 If you select [NEW] then press ENTER, you can

program a new timer record (see page 41).

Canceling a Timer Recording

You can clear a timer setting anytime before the

recording actually starts.



Use v / V to select a program you want to erase on

the Timer Recorder List.

Press CLEAR and the confirm message will appear.

Press ENTER while the [OK] is selected to erase

the recording.

Stopping a Timer Recording in Progress

After a timer recording has started, you can still

cancel the program.

 You can stop a timer recording in progress.

Press STOP and the confirm message will appear.

Press ENTER to stop the recording or

press RETURN (O) to continue the recording.

Timer Recording Troubleshooting

Even though the timer is set, the recorder will not

record when:

 There is no disc loaded and there is not free space

on the HDD.

 A non-recordable disc is loaded and there is not

free space on the HDD.

 [Disc Protect] option is set to [ON] in the Setup menu

and there is not free space on the HDD. (see page 25).

 Power is turned on.

 There are already 99 titles (DVD-RW, DVD-R),

49 titles (DVD+R, DVD+RW) recorded on the disc

and there are already 255 titles recorded on the

HDD.

You cannot enter a timer program when:

 A recording is already underway.

 The time you’re trying to set has already passed.

 There are already 16 timer programs set.

If two or more timer programs overlap:

 The earlier program takes priority.

 When the earlier program finishes, the later program

starts.

 If two programs are set to start at exactly the same

time, the program entered first takes priority.

If the disc is damaged, the recording may not

complete successfully. In this case even though the

Check field shows “Rec. OK”, it may not be.

Recording from an External

Input

Recording from External Components

You can record from an external component, such as

a camcorder or VCR, connected to any of the

recorder’s external inputs.

1. Make sure that the component you want to record

from is connected properly to the recorder. See

page 16-17.

2. Choose a media (TV HDD or TV DVD) to record

using HOME menu. (see page 18).

3. Press AV/INPUT repeatedly to select the external

input to record from.

 PR-XX: Built-in tuner

 AV1: AV1 scart jack mounted on back panel

 AV2: AV2 DECODER scart jack mounted on

back panel

 AV3: AV IN 3 (VIDEO, AUDIO (L/R)) mounted on

front panel

 DV: DV IN mounted on front panel

4. Select the recording mode as necessary by

pressing REC MODE repeatedly. (XP, SP, LP or

EP)

5. Press REC (z) once.

Recording will start. (The REC indicator lights in

the display window.)

 Recording continues until you press STOP (x)

or the HDD is full.

 To record for a fixed length of time, see “Instant

Timer Recording” on page 39.

6. Press STOP (x) to stop recording.

Note:

If your source is copy-protected using CopyGuard, you

will not be able to record it using this recorder. See