User guide

Operating28
Operating
4
Sleep Timer Setting
Press SLEEP one or more times to select delay time
between 10 and 180 minutes, after which the unit
turn o.
To cancel the sleep function, press SLEEP
repeatedly until “SLEEP 10” appears, and then press
SLEEP once again while “SLEEP 10” is displayed.
y
You can check the remaining time before
the Unit turns o.
y
Press SLEEP. The remaining time appears in
the display window.
y
Sleep function will work after dimmer.
,
Note
Dimmer
Press SLEEP once. The display window will be
darken by half. To cancel it, press SLEEP repeatedly
until dim o.
Radio Operations
Listening to the radio
1. Press FUNCTION on the remote control or F on
the unit until FM appears in the display window.
The last received station is tuned in.
2. Press and hold TUNING (-/+) on the remote
control or TUN. (-/+) on the unit for about 2
seconds until the frequency indication starts to
change, then release. Scanning stops when the
unit tunes in a station.
Or
Press TUNING (-/+) on the remote control or
TUN. (-/+) on the unit repeatedly.
3. Adjust the volume by pressing VOL +/-
repeatedly.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press FUNCTION on the remote control or F on
the unit until FM appears in the display window.
2. Select the desired frequency by pressing
TUNING (-/+) on the remote control or TUN.
(-/+) on the unit.
3. Press PROG./MEMO. a preset number will flash
in the display window.
4. Press PRESET (
w/s
) to select the preset
number you want.
5. Press PROG./MEMO. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press PRESET (
w/s
).
Deleting all the saved stations
1. Press and hold PROG./MEMO. for two seconds.
“CLEAR” will flash up on the unit display.
2. Press PROG./MEMO. to erase all saved radio
stations.