User guide

Operating 25
Operating
4
Radio Operations
Listening to the radio
1. Select tuner (FM) function by using FUNCTION
on the remote control or FUNC. on the unit
The last received station is tuned in.
2. Auto tuning :
Press and hold TUNING (-/+) on the remote
control or TUNING (-/+) on the unit for about
two seconds until the frequency indication
starts to change, then release. Scanning stops
when the unit tunes in a station.
Manual tuning :
Press TUNING (-/+) on the remote control or
TUNING (-/+) on the unit repeatedly.
3. Adjust the volume by pressing VOL (+/-)
repeatedly or rotate Volume knob on the unit.
Improving poor FM reception
Press
d
MONO/STEREO on the remote control.
This will change the tuner from stereo to mono and
usually improve the reception.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Select tuner (FM) function by using FUNCTION
on the remote control or FUNC. on the unit
The last received station is tuned in.
2. Select the desired frequency by pressing
TUNING (-/+) on the remote control or TUNING
(-/+) on the unit.
3. Press PROG./MEMO.. A preset number will flash
in the display window.
4. Press PRESET (
w/s
) to select the preset
number you want.
5. Press PROG./MEMO.. The station is stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press PRESET (
w/s
)
or PRESET (+/-) on the unit.
Deleting the saved stations
Each of the saved stations
1. Select the saved station you want to delete.
2. Press CLEAR. A preset number will blink on the
display window.
3. Press CLEAR again while the preset number is
displayed.
All the saved stations
1. Press and hold CLEAR on the remote control
for about two seconds. “CLEAR” will blink on the
display window.
2. Press CLEAR again while “CLEAR” is displayed.
All the saved stations are cleared.
DM1530-DU.ADEULLK_eng_MFL67693327_v.2_ .    .indd 25 2013-03-11  1:20:55