Use and Care Manual

39
ENGLISH
Steam cycle guide
Steam
Default
Time
Temp.
Control
Dry Level
Fabric
State
Fabric Type
Maximum
Amount
Steam Sanitary™
39 minutes Dry
Comforter
Bedding
Single (1 each)
Children’s
clothing
3 lbs.
Spot Clean™
22 minutes Dry Shirts* Single (1 each)
Steam Fresh™
20 minutes

Dry
Comforter Single (1 each)
Shirts* 5 each
+
Reduce
Static
10 minutes Dry Shirts*
8 lbs.
(18 Items.)
+
Easy
Iron
12 minutes Dry Shirts* Shirts* (5 each)
Steam Option
+
Reduce
Static
Follows
Selected
Cycle

Wet
Varies by selected
cycle
8 lbs.
(18 Items.)
+
Easy
Iron

Wet
Varies by selected
cycle
Shirts* (5 each)
Time Dry
+
Reduce
Static
45 minutes

Wet
Varies by selected
cycle
8 lbs.
(18 Items.)
+
Easy
Iron
47 minutes

Wet
Varies by selected
cycle
Shirts* (5 each)
*Shirt: 70% cotton:30% poly blend. Except especially delicate fabrics.
• When the lint filter or exhaust duct is clogged, steam options will not give proper results.
• For best results, load articles of similar size and fabric type. Do not overload.
Steam Functions (cont.)
w
WARNINg
• Do not open the dryer door during steam cycles.
Failure to follow this warning can cause serious injury
or death.
• Do not fill the steam feeder with gasoline, dry-
cleaning solvents, or other flammable or explosive
substances. Failure to do so can result in death,
explosion, fire, or burns.
• Do not touch the steam nozzle in the drum during
or after the steam cycle. Failure to follow this warning
can cause serious injury or death.
NOTE
• Steam may not be clearly visible during the steam
cycles. This is normal.
• Do not use Steam Fresh™ and Spot Clean™ cycles with
items such as wool, wool blankets, leather jackets,
silk, wet clothes, lingerie, foam products, or electric
blankets.
• For best results, load articles of similar size and fabric
type. Do not overload.
• When the filter/duct is clogged, the steam option may
not have optimal results.
• When the steam function is operating, the drum will
stop to allow steam to stay in the drum.
• The steam feeder must be filled with water up to the
MAX line. Otherwise, an error message will be displayed.
HOW TO USE