User guide

7
ENG
ENGLISH
ASSEMBLING AND PREPARING

Oncethepinisremoved,itisnotnecessary
tore-insertittoadjusttheheight.
Adjustingthestandheight
1
 Placethemonitormountedonthestandbase
inanuprightposition.
2
 Removethetapeattachedatthebottomrear
ofthestandbody,thenpulloutthelocking
pin.
3
 Theheightcanbeadjustedupto130mm.

Donotputyourfingersor
handbetweenthescreen
andthebase(chassis)when
adjustingthescreen'sheight.
Tape
LockingPin
StandBody
130.0mm
CAUTION
WARNING
20- 5
Adjustingtheangle
1
 Placethemonitormountedonthestandbase
inanuprightposition.
2
 Adjusttheangleofthescreen.Theangleof
thescreencanbeadjustedupto20°forwards
and5°backwardsforacomfortableviewing
experience.

Toavoidinjurytothefingerswhenadjusting
thescreen,donotholdthelowerpartofthe
monitor'sframeasillustratedbelow.

Becarefulnottotouchorpressthescreen
areawhenadjustingtheangleofthemonitor.
FrontSide RearSide
WARNING
20- 5