User manual

About AC Smart II

Quick Guide

ENGLISH

Item Description

Set the criteria temperature to automatically switch the temperature.

Select the temperature difference for Automatic switch operation to

operate. When the difference between the current indoor temperature

and criteria temperature is higher than or lower than this temperature

difference, the operating mode of the indoor unit will automatically

switch.

Select the method to measure the indoor temperature. You can select

one of the three methods to measure the indoor temperature.

- Average all units: Method of operating the Automatic switch

operation function by using the average of the temperature from

indoor units detected within the group

- Average all operating units: Method of operating the Automatic

switch operation function by using the average of the temperature

from operating indoor units within the group

- Fixed: Method of operating the Automatic switch operation function

according to the temperature detected based on the criteria of the

indoor unit registered first within the group.

Set whether to execute or not execute the Automatic switch operation.

- Apply: Execute the Automatic switch operation function

- Not apply: Not execute the Automatic switch operation function

Automatic switch operation condition setting

When you press the [Set option] button, the ʻCondition settingʼ screen to set the Automatic switch

operation function and related items will be displayed as shown in the left picture.

Designate the Automatic switch operation group and set the item for Automatic switch operation, and

then press the [Save] button to set the Automatic switch operation

function to the applicable group.

Refer to the following table for the description on the items to set the Automatic switch operation.

Apply/Not apply

Temperature

difference

Temperature

criteria

Temperature setting