User manual

About AC Smart II
AC Smart II
34
■ Automatic switch operation
Automatic switch operation is the function to automatically switch the operating mode (Cool/Heat) of
the air conditioner according to set temperature and range. That is, when the current temperature is
more than lower than the set temperature range base don the criteria, it will operate the Heat mode to
maintain the temperature within the set range. On the other hand, when the current temperature is
more than higher than the set temperature range, it will operate the Cool mode to maintain the
temperature within the set range.
Edit automatic switch operation group
When you press the [Edit group] button, ʻEdit groupʼ screen to create, edit or delete the
group for Automatic switch operation is displayed as shown on the left picture.
In the ʻGroupʼ, you can add a new group or delete/rename the existing group.
In the ʻGroup informationʼ, use the [ ] or [ ] button to add the unit to or remove the
unit from the group.
When you press the [Basic group setting] button, you can automatically create the group
according to the group and unit setting set in the ʻSystem settingʼ menu without creating the
Temperature limit operation group separately.
The group and setting of automatic switch operation are
displayed in table format.
You can create, edit or delete the
group to apply automatic switch
operation.
You can set the condition
for automatic switch
operation.