User manual

About AC Smart II
AC Smart II
32
Item Description
Group name Name of temperature limit operation group is displayed.
Upper limit temperature Set the maximum temperature permitted as indoor temperature.
Lower limit temperature Set the minimum temperature permitted as indoor temperature.
Select the method to measure the indoor temperature. You can select
one of the two methods to measure the indoor temperature.
- Average all units: Method of operating the Temperature limit
operation function by using the average of the temperature from
indoor units detected within the group
- Fixed: Method of operating the Temperature limit operation function
according to the temperature detected based on the criteria of the
indoor unit registered first within the group
Set whether to execute or not execute the Temperature limit
operation.
- Apply: Execute the Temperature limit operation function
- Not apply: Not execute the Temperature limit operation function
Number of device Number of indoor units included in each group is displayed.
Apply/Not apply
Temperature
criteria
Refer to the following table for the description on the items to set the Temperature limit operation.
Edit temperature limit group
When you press[Edit group] button, ʻEdit
groupʼ screen to create, edit or delete the
group for Temperature limit operation is
displayed as shown on the left picture. In the
ʻGroupʼ, you can add a new group or
delete/rename the existing group.
In the ʻGroup informationʼ, use[] or [] button to
add the unit to or remove the unit from the
group.
When you press the [Basic group setting]]
button, you can automatically create the group
according to the group and unit setting set in
the ʻSystem settingʼ menu without creating the Temperature limit operation group separately.
<Temperature limit operation group edit
screen>