ENGLISH ITALIANO ESPAÑOL FRANÇAIS OWNER’S MANUAL DEUTSCH Please read this manual carefully before operating your set and retain it for future reference. DUTCH TYPE : AC SMART II Advanced Control Smart www.lge.
AC Smart II TABLE OF CONTENTS Safety precautions .............................................................................................................3 Introduction of AC Smart II................................................................................................7 AC Smart II characteristics ................................................................................................7 AC Smart II exterior ...............................................................................
Safety Precautions Safety Precautions WARNING This symbol indicates the possibility of death or serious injury. CAUTION This symbol indicates the possibility of injury or damage. ■ Meanings of symbols used in this manual are as shown below. Be sure not to do. Be sure to follow the instruction. WARNING ■ Operation Do not operate or stop the unit by inserting or pulling out the power plug. Ask for Product equipment at the service center or establishment certainly at the specialty store.
Safety Precautions While re-installing the established product, notify the service center or establishment specialty store • It can cause an accident, electric shock, explosion, injury.shock. Do not use the power cord near Flammable gas or combustibles, such as gasoline, benzene, thinner, etc. • It may cause an explosion or fire. Do not disjoint randomly or repair and remodel the product. • It may cause fire and electric shock.
Safety Precautions Do not put firearms near product. • It can cause fire. • It can cause fire and electric shock. That increase in case of product was been flood certainly in the service center or establishment specialty store commit . • I am responsible for fire and electric shock. Do not spill water inside product. • It can cause fire and electric shock. • It can cause electric shock and breakdown. Hold the plug by the head of the power plug when taking it out. Do not place heavy goods on product.
Safety Precautions CAUTION ■ During usage Clean by soft hands using a cleaning material like a soft cloth. • It can result in fire and product transformation. Use touch screen with a pen that product offers. • Otherwise, there can be breakdown and damage to the product. Do not place any live part on the surface having water. • It can cause product breakdown. x Wa Thinner Use recommended Adapter.
Introduction of AC Smart II Introduction of AC Smart II AC Smart II characteristics The characteristics of AC Smart II are as follows. Individual and integrated operation & monitoring AC Smart II can control and monitor the following items of the installed air conditioners by selecting individually, group or all. • Operating status, operating mode, fan level, fan direction, lock, set temperature, individual lock, temperature range.
Introduction of AC Smart II Web server and E-mail notification function AC Smart II provides a web server function for the administrator to control the air conditioner by accessing the AC Smart II remotely through the network. Also it provides the E-mail notification function to notify the error to the administrator located remotely via E-mail. Backup and upgrade function AC Smart II provides the backup and recovery function of the key database for stability of the system.
Introduction of AC Smart II AC Smart II Component The components of AC Smart II are as follows inside the box. Open the box of AC Smart II and check whether all components are included. ENGLISH LG AC Smart Power adapter Quick Guide Manual CD Power cord AC Smart II product specification The product specification of AC Smart II is as follows.
About AC Smart II About AC Smart II This chapter describes how to log in to AC Smart II and the functional menu of AC Smart II. Logging on AC Smart II When you turn on the power of AC Smart II, the following log in screen will be displayed. You can log in as installation expert, administrator and general user to AC Smart II.
About AC Smart II About AC Smart II screen composition Log out button AC Smart II menu Log out button When you press the log out button, you will log out from AC Smart II and return to the log in screen. AC Smart II Menu Function provided in AC Smart II is displayed. You can click on the function and the screen will switch to the applicable function screen.
About AC Smart II When the user selects a specific function, the execution screen of the applicable function will be displayed. The following is an example of the Control/Monitoring menu. Home button Log out button Function execution screen Message window Home button When you press the Home button, it will switch to the menu selection screen of AC Smart II. Log out button When you press the log out button, you will log out from AC Smart II and return to the log in screen. .
About AC Smart II About control/monitoring menu Control/Monitoring menu screen is composed as follows. Caution: If many devices are selected simultaneously for control, the common function of the selected devices is controlled simultaneously. Move to upper level or select all Zone, Group or Device. Displays all names included in higher hierarchy where selected object is part of. You can change the information display method to icon format or table format.
About AC Smart II ■ Zone, group, and unit status display Status display of zone, group and unit Control/Monitoring menu displays the status of Zone, Group or Unit (Indoor unit, ventilator) through the following icons. When you set the information display method to ʻIcon”, it is displayed as follows. Status Zone Group Icon Indoor unit Ventilator On/Off AWHP Normal operation Alarm Not in operation On the other hand, when you set the information display method to ʻSimpleʼ, it is displayed as follows.
About AC Smart II Unit operating mode display Unit type Icon Description Icon Description Icon Description Cool mode Heating mode Dehumidifier mode Fan mode Ventilator Electric Heating Mode General mode Auto mode AWHP Cool mode Heating mode Auto mode Auto mode Indoor unit - - On the other hand, when you set the information display method to ʻSimpleʼ, it is displayed as follows.
About AC Smart II Unit alarm display AC Smart II displays the current alarm with the following icon. In the following example, the indoor unit is used. When you set the information display method to ʻIcon”, it is displayed as follows. Alarm Description Alarm Description Alarm 128 room expansion device error Communica tion error Description Other error On the other hand, when you set the information display method to ʻSimpleʼ, it is displayed as follows.
About AC Smart II ■ Zone, group and unit monitoring and control There is the ʻMonitoringʼ tab on the bottom of the Control/Monitoring menu. Monitoring tab displays the detail information of the selected Zone, Group or Unit. The monitoring information of the Zone or Group is differently displayed as the monitoring information of the Unit.
About AC Smart II In the monitoring tab of the unit, you can see the more detailed information of the unit. When you press the [Detail] button, the monitoring window showing the detail information of the unit will be displayed as shown in the left picture. Zone, Group and Device control You can directly control the Zone, Group or Device from the Control tab.
About AC Smart II Display the detail control screen so that the ventilator can be controlled in detail. Apply current setting. Run/Stop On/Off device operation. On/Off device Apply current setting. AWHP device Set desired indoor air temperature and water temperature of AWHP device. Set operating mode and lock function. RUN/STOP AWHP DEVICE OPERATION. Apply current setting. When you press the [Detail control] button, the detail control screen of each device is displayed.
About AC Smart II About schedule menu Schedule is the function to execute the operation at a preset time by setting the operation of the unit beforehand. You can set the schedule of the unit in Group from the schedule menu. In AC Smart II, you can create a schedule group to commonly apply the schedule. Also by introducing the Pattern concept, the schedule can easily be applied repeatedly in weeks or days.
About AC Smart II ■ Schedule setting method This chapter shows how you can set the schedule assuming that you have just installed AC Smart II. In order to create the schedule after installing AC Smart II for the first time, you must first create a schedule group. 1. When you select the ʻScheduleʼ menu from the initial screen of AC Smart II, the following screen is displayed. Click on the [Edit group] button to create a schedule group. 2. ʻEdit groupʼ screen is displayed.
About AC Smart II 4. Press the [Save] button to save the current setting. When the setting is saved, it will return to the previous screen. Create weekly schedule pattern When the schedule group is created, you must set the weekly schedule pattern. 1. To create the schedule pattern, click on the [Schedule pattern wizard] button. 2. ʻSchedule pattern editing wizardʼ screen is displayed. To create a new weekly schedule pattern, select ʻAdd/Edit weekly schedule patternʼ and click on the [Next] button.
About AC Smart II 3. Select ʻAdd schedule patternʼ and click on the [Next] button. ENGLISH 4. Enter the weekly schedule pattern, and click on the [Next] button. 5. Select the time to operate the device from ʻSelect timeʼ or ʻSchedule timeʼ. And set the device operation from the ʻControl settingʼ item. When you press the [Apply schedule] button, the schedule will be added to the table. If you need to add more schedules, you can continuously set the event by repeating the above process.
About AC Smart II 6. Message saying that schedule pattern edit is complete is displayed. Click on the [OK] button to complete the edit. Information: Apply daily schedule pattern and daily schedule repeat While creating/editing the weekly schedule pattern, you can apply the daily schedule pattern. When you click on [Apply daily schedule pattern] button in stage 4 of schedule pattern editing wizard, you can import the daily schedule pattern and apply to a specific day.
About AC Smart II Apply schedule 1. To apply the schedule, press the [Schedule wizard] button 2. Schedule wizard screen is displayed. Select ʻAdd/Edit scheduleʼ, and select the schedule group to apply the schedule. Click on the [Next] button. 3. Select ʻAdd scheduleʼ and click on the [Next] button. Quick Guide 25 ENGLISH You can apply the schedule after integrating the information of schedule group, schedule pattern and period. To apply the schedule, proceed as follows.
About AC Smart II 4. When you click on the button, the calendar will be displayed. Use the calendar to select the period (Start date, End date) to apply the schedule. After entering the period, click on the [Next] button. 5. Set whether to apply the weekly schedule pattern. To apply the weekly schedule pattern, check the ʻApplyʼ button and select the weekly schedule pattern to apply. If you do not wish to apply the weekly schedule pattern, check the ʻDo not applyʼ button and directly enter in stage 5.
Introduzione ad AC Smart II Introduzione ad AC Smart II AC Smart II è un controller centrale in grado di gestire fino a 64 condizionatori interni singolarmente o in gruppo. Inoltre, quando si collega il kit di estensione AC Smart II, è possibile controllare fino a 128 unità (PQCSE440U0).
