OWNER’S MANUAL ENGLISH Mini Hi-Fi System Please read this manual carefully before operating your set and retain it for future reference. CM9540 (CM9540, CMS9540F/W) www.lg.com CM9540-FS.DRUSLLC_ENG.
1 2 Getting Started Getting Started Safety Information 1 CAUTION Getting Started RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
Getting Started This device is equipped with a portable battery or accumulator. Утилизация старого бытового прибора 1. Символ на устройстве, изображающий перечеркнутое мусорное ведро на колесах, означает, что на изделие распространяется Директива 2002/96/CE. 2. Все электрические и электронные устройства следует утилизировать отдельно от бытового мусора, в специальных местах сбора, назначенных правительственными или местными органами власти. 3.
Table of Contents Table of Contents 1 Getting Started 2 6 6 7 7 7 7 8 10 12 Safety Information Unique Features Accessories Playable file Requirement – Music file requirement – Compatible USB Devices – USB device requirement Remote control Front panel Rear panel CM9540-FS.DRUSLLC_ENG.
Table of Contents 3 Operating 4 Troubleshooting 18 18 18 Basic Operations – CD/USB Operations – Selecting a folder and an MP3/WMA file – Deleting an MP3/WMA file Playback effect – SMART DJ playback – DJ EFFECT – AUTO DJ playback – JUKE BOX Playback (Program play) Using a Bluetooth wireless technology – Listening to music stored on the Bluetooth devices – Using Bluetooth App – Activate Bluetooth with “LG Bluetooth Remote” App Radio Operations – Listening to the radio – Improving poor FM reception – Pre
Getting Started Unique Features 1 Bluetooth® Accessories Please check and identify the supplied accessories. Getting Started Listens to music stored on your bluetooth device. Portable In Listens to music from your portable device. (MP3, Notebook, etc) FM Antenna (1) Remote Control (1) Rubber foot (8) Batteries (2) Playback effects Listens to music with various sound and playback effects.
Getting Started Playable file Requirement MP3/WMA file compatibility with this unit is limited as follows. yy Sampling frequency : within 32 to 48 kHz (MP3), within 32 to 48 kHz (WMA) yy Bit rate : within 32 to 320 kbps (MP3), 40 to 192 kbps (WMA) yy Maximum files : Under 999 Compatible USB Devices yy MP3 Player : Flash type MP3 player. yy USB Flash Drive : Devices that support USB2.0 or USB1.1. yy The USB function of this unit does not support all USB devices.
Getting Started Remote control • • • • • • • • • • a • • • • • • • • • • 1 (Power) : Switches the unit ON or OFF. B (Open/Close) : Opens and closes the disc tray. PRESET.FOLDER W/S : 1 Getting Started -- Searches for a folder of MP3/WMA files. When a CD/USB containing MP3/WMA files in several folders is being played, press PRESET.FOLDER W/S to select the folder you want to play. -- Chooses a preset number for a radio station. * FUNCTION : Selects the function and input source.
Getting Started 9 • • • • • • • • • • c • • • • • • • • • • REPEAT (MENU) : Listens to your tracks/files repeatedly or randomly. 0 to 9 numerical buttons : Selects numbered tracks, files, or preset number. TUNING-/+ : Selects the radio stations. INFO : Sees informations about your music. An MP3 file often come with ID3 tag. The tag gives the Title, Artist, Album or Time information. C/V (Skip/Search) : -- Skips Fast backward or Forward. -- Searches for a section within a track/file.
Getting Started Front panel l 1 Getting Started a b m n o c p d q r e f s g t h u i j v w x k CM9540-FS.DRUSLLC_ENG.
Getting Started a 1/!(Power) b Display window c Y/U - Skips Fast backward or Forward. - Searches for a section within a track/file. eT - Starts or pauses playback. - Selects Stereo/Mono. f X-FLASH - Selects a X-FLASH mode. - Selects a X-FLASH level. (Refer to the 29 page.) (X-FLASH : The white LED lights up of the Speaker.) g DJ EFFECT Selects DJ effect. (For more informaion refer to the page 21). h DJ EFFECT CONTROL Makes a sound on DJ effect mode.
Getting Started Rear panel 1 Getting Started a c d b e f a Cooling fan b Speakers connector c SPEAKER LIGHTING SYSTEM d AUX IN connectors (L/R) e ANTENNA (FM) f Power cord >>Caution yy Connect the power cord to wall outlet directly if possible. Or when you use an extension cable, it is highly recommended to use an extension cable of 110 V / 15 A or 230 V / 15 A, otherwise the unit may not operate properly because of the lack of power supply.
Connecting 13 How to Affix the Ferrite Core Connecting to speakers Ferrite core may not be provided depending on each nation’s regulations. Connect the speaker cable plugs to the SPEAKERS connector. Make sure to connect the speaker’s plug to the corresponding speaker connector when connecting the plug. Affix the Ferrite Core for power cord 2 Connecting You must affix a ferrite core in order to reduce or eliminate electrical interference. 1. Pull the stopper [a] of the ferrite core to open. 2.
Connecting >>Caution yy Do not try to lift the speaker alone. It needs two persons to lift the speaker. Otherwise it may result in the speaker malfunction and cause personal injury and/or property damage. 2 Attaching the speaker light cables to the unit To connect the speaker light cable to the unit, insert the cable to SPEAKER LIGHTING SYSTEM connectors on the unit.
Connecting Stacking the speakers You can listen to the best sound quality when you stack the speakers. Refer to the below. 15 Arrange the main unit and the speakers Front speaker Before stacking You have to position the unit and the speakers before connecting the speakers. Note that the illustrations below are differ from the actual unit. Stacking the speakers 2 Main unit Connecting 1. You install Subwoofer speaker on a flat surface.
Connecting Optional Equipment Connection PORT. IN Connection Connect an output (earphone or line out) of portable device (MP3 or PMP etc) to the PORT. IN connector. AUX IN Connection Connect an output of auxiliary device(Camcoder, TV, Player, etc) to the AUX IN (L/R) connector. 2 Connecting If your device has only one output for audio(mono), connect it to the left (white) audio jack on the unit. Portable cable Audio cable MP3 player etc.
Connecting USB Connection Antenna Connection Connect a USB device (or MP3 player, etc.) to the USB ports on the unit. Connect the supplied FM antenna for listening to the radio. USB device 17 Connect the FM wire antenna to the FM antenna connector. FM antenna 2 Connecting ,,Note Removing the USB device from the unit : 1. Choose a different function/mode or press Z ENTER on the remote control or I on the unit twice in a row. 2. Remove the USB device from the unit.
3 Operating 18 Operating Basic Operations CD/USB Operations 1. Insert the disc by pressing B or connect the USB device to the USB port. 2. Select the CD or USB function by rotating FUNCTION on the unit or by pressing FUNCTION on the remote control. To 3 Operating Do this Press Z ENTER on the remote Stop control or I on the unit. Press d/M on the remote control Playback or T on the unit. Press d/M on the remote control Pause or T on the unit.
Operating ,,Note yy CD / USB Folders/Files are recognized as below. * 19 Deleting an MP3/WMA file You can delete file, folder or format by pressing DELETE. This function is supported only in stop status. (USB only) 1. - Select the file you want to delete and press DELETE. - Select the folder you want to delete by pressing FOLDER and rotating FILE SEARCH and press DELETE. - Press and hold DELETE to format the USB device. Or Press DELETE repeatedly during selecting the MP3/WMA file.
Operating Playback effect The unit supports various sound and playback effects : SMART DJ, AUTO DJ, DJ EFFECT, and JUKE BOX playback. ,,Note yy Find sound and playback effects below. Effect Description Auto effect Auto effect blends various sound effects to fit the mood automatically. It includes flanger, phaser, delay, and chorus. Cross fade It playbacks to seamlessly fade from one song into the beginning of another. Back spin It playbacks a section of music fast in reverse.
Operating 21 DJ EFFECT Adjusting the effect level It allows you to enjoy DJ EFFECT such as Flanger/ Phaser/Chorus/Delay FX sound effect. You can adjust DJ EFFECT sound Gage level between 0 to 15. As the effect level moves from 0 to15, SMART DJ effect appears more frequently and makes the sound feel more powerful. 1. Rotate DJ EFFECT CONTROL while press and hold DJ EFFECT on the unit.
Operating AUTO DJ playback Auto DJ blends the end of one song into the beginning of another for seamless playback. It equalizes volume across tracks/files for uninterrupted playback. Press AUTO DJ on the remote control or unit repeatedly, the display changes as followings. RANDOM (AUTO DJ RANDOM) -> REPEAT ALL (AUTO DJ SEQUENTIAL) -> (AUTO DJ OFF) Mode OFF 3 Display Window (AUTO DJ OFF) Description - Operating RANDOM RANDOM (AUTO DJ RANDOM) The music is played randomly on this mode.
Operating 23 JUKE BOX Playback (Program play) JUKE BOX function enables you to make a playlist of your favourite tracks/files from a disc or USB device. A playlist of up to 100 tracks/files can be entered for each media (CD, USB1,USB2). Possible to save a total of 300 tracks/files. Making JUKE BOX list It is supported only on stop status. 1. Press and hold JUKE BOX to enter the edit mode. 2. Select a track/file by pressing C/V on the remote control or by turning FILE SEARCH on the unit. 4.
Operating Using a Bluetooth wireless technology About Bluetooth Bluetooth® is wireless communication technology for short range connection. The sound may be interrupted when the connection interfered by the other electronic wave or you connect the bluetooth in the other rooms. 3 Operating Connecting individual devices under Bluetooth® wireless technology does not incur any charges.
Operating 25 ,,Note yy When using Bluetooth® technology, you have to make a connection between the unit and the bluetooth device as close as possible and keep the distance. However it may not work well in the case below : -- There is a obstacle between the unit and the bluetooth device. -- There is a device using same frequency with Bluetooth® technology such as a medical equipment, a microwave or a wireless LAN device. yy You should connect your Bluetooth device to this unit again when you restart it.
Operating Install “LG Bluetooth Remote” App through “Google Android Market (Google Play Store)” Install “LG Bluetooth Remote” App through NFC 1. Tap the “Google Android Market (Google Play Store)” icon. NFC (Near Field Communication) allows you to install and open “LG Bluetooth Remote” app to NFCenabled phone. 2. In the search bar, type in the “LG Bluetooth Remote” and search it. 1. Activates the NFC feature of your NFC-enabled phone. 3.
Operating 27 Activate Bluetooth with “LG Bluetooth Remote” App Radio Operations “LG Bluetooth Remote” app helps to connect your bluetooth device to this unit. Be sure that FM aerials are connected. (Refer to the page 17) 1. Tap “LG Bluetooth Remote” app icon on the home screen to open “LG Bluetooth Remote” app, and go to the main menu. Listening to the radio 2. Tap [Setting] and select the unit you want. 3. If you want to get more information to operate, tap [Setting] and [Help].
Operating Presetting the Radio Stations You can preset 50 stations for FM. Before tuning, make sure to turn down the volume. 1. Rotating FUNCTION knob on the unit until FM appears in the display window. 2. Press TUNING-/+ on the remote control or Y/U on the unit to select a desired frequency. 3. Press TUNER MEMORY. A preset number will blink in the display window. 4. Press PRESET.FOLDER W/S to select the preset number you want. 3 5. Press TUNER MEMORY. The station is stored. 6.
Operating 29 Using Microphone Using X-FLASH It is available on the function as follows : CD, USB, AUX-MIC and BLUETOOTH. X-FLASH : The function is to create an atmosphere of Club by operating lighting automatically or manually when a strong beat music is being played. 1. Connect your microphone to the MIC jack. 2. Play the music you want. 3. Sing along with the accompaniment. Adjust the microphone volume by rotating MIC VOL. clockwise or unclockwise on the unit.
Operating Sound adjustment Setting the surround mode This system has a number of pre-set surround sound fields. You can select a sound mode you want by using SOUND EFFECT on the remote control. The displayed items for the Equalizer may be different depending on sound sources and effects. ,,Note yy On some speakers, sound may not be heard or heard in low sound depending on the sound mode.
Operating 31 Setting the Clock Using your player as an alarm clock 1. Turn the unit on. 1. Turn the unit on. 2. Press and hold CLOCK. 2. Press and hold ALARM. 3. Select time mode by pressing C/V on the remote control. 3. Press C/V on the remote control to change the hours and minutes and press SET to save. - AM 12:00 (for an AM and PM display) or 0:00 (for a 24 hour display) 4. Press SET to confirm your selection. 5. Select the hours by pressing C/V on the remote control. 6. Press SET. 8.
Operating Sleep Timer Setting Auto power down Press SLEEP repeatedly to select delay time between 10 and 180 minutes. After the delay time, the unit will be turned off. This unit will turn off itself to save electric consumption in the case were main unit is not connected to external device and is not used for 20 minutes. So does this unit after six hours since Main unit has been connected to other device using analogue input.
4 Troubleshooting Troubleshooting 33 Troubleshooting General Problem Cause & Solution yy The power cord is not plugged in. Plug in the power cord. No Power. No sound. yy Check whether electricity failed. Check the condition by operating other electronic devices. yy Check whether you select right function. Rotating FUNCTION knob and check the selected function. yy If not, connect speaker cables correctly. Speaker cables connected correctly. yy An unplayable disc is inserted. Check the playable disc.
5 Appendix 34 Appendix Trademarks and Licenses Bluetooth® wireless technology is a system which allows radio contact between electronic devices. Connecting individual devices under Bluetooth® wireless technology does not incur any charges. A mobile phone with Bluetooth® wireless technology can be operated via the Cascade if the connection was made via Bluetooth® wireless technology. The Bluetooth® word mark and logos are owned by the Bluetooth® SIG, Inc.
Appendix 35 General specifications General Power requirements Refer to the main label. Power consumption Refer to the main label. Dimensions (W x H x D) (290 x 349 x 370) mm Net Weight (Approx.) 5.9 kg Operating temperature 5 °C to 35 °C (41 °F to 95 °F) Operating humidity 60 % Bus Power Supply 5 V 0 500 mA Inputs AUX IN 2.0 Vrms (1 kHz, 0 dB), 600 Ω, RCA jack (L, R) PORT. IN 1.2 Vrms (3.5 mm stereo jack) MIC 20 mV Tuner FM Tuning Range 87.5 to 108.0 MHz or 87.50 to 108.
Appendix Speakers specifications Front speaker Type 2 Way 2 Speaker Impedance 6Ω Rated Input Power 385 W Max. Input power 770 W Surround speaker Type 1 Way 1 speaker Impedance 6Ω Rated Input Power 380 W Max. Input power 760 W Net Dimensions (W x H x D) (425 x 505 x 351) mm Net Weight 13.2 kg Subwoofer Type 1 Way 1 speaker Impedance 6Ω 5 Rated Input Power 385 W Appendix Max. Input power 770 W Net Dimensions (W x H x D) (425 x 505 x 354) mm Net Weight 12.
Appendix 37 Maintenance Notes on Discs Handling Discs Never stick paper or tape on the disc. Storing Discs Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean After playing, store the disc in its case.
Символ «не для пищевой продукции» применяется в соответствие с техническим регламентом Таможенного союза «О безопасности упаковки» 005/2011 и указывает на то, что упаковка данного продукта не предназначена для повторного использования и подлежит утилизации. Упаковку данного продукта запрещается использовать для хранения пищевой продукции.
