User guide

Operating 21
Operating
3
y
If you set the clock time, you can check the
time by pressing CLOCK even when the
player is turned o.
y
If you set the clock time and alarm, you
can check the alarm icon “
(
“ by pressing
CLOCK even when the player is turned o.
y
If you set the clock time and alarm, you
can check the alarm icon “
(
“ and setting
informaiton by pressing TIMER even when
the unit is turned o.
,
Note
Sleep Timer Setting
Press SLEEP on the remote control repeatedly to
select delay time between 10 and 180 minutes.
After delay time, the unit will turn o. (You can see
the following order, 180 ->150 -> 120 -> 90 -> 80
-> 70 -> 60 -> 50 -> 40 -> 30 -> 20 -> 10). To cancel
the sleep function, press SLEEP repeatedly until the
display window get bright.
• Press SLEEP. The remaining time appears in
the display window.
• Sleep function will work after dimmer
function.
,
Note
Dimmer
Press SLEEP once. The display window will
be darkened by half. To cancel it, press SLEEP
repeatedly until the display window get bright.
• After setting a clock function, you can set
alarm function.
• If you set the clock and alarm, you can check
the time and alarm icon “
(
“ by pressing
CLOCK although the unit is turned o.
• During playback, press TIMER two times
when the alarm icon “
(
“ is displayed. You
can check the setting state.
• If you activate the alarm, the alarm icon “
(
“
will appear in the display window.
• If you deactivate the alarm, the alarm icon
“
(
“ will disappear in the display window.
• Alarm function only works when the unit is
turned o.
• If the time you set is up, the unit will be
turned on automatically.
,
Note
Advanced Operations
Listening to the sound from
your external device
The unit can be used to play the sound from many
types of external device. (Refer to the page 15)
1. Connect the external device to the AUX IN(L/R)
connector of the unit.
2. Turn the power on by pressing
1
/
!
(Power).
3. Select the AUX function by pressing FUNC. on
the unit.
4. Turn the external device and start playing it
Auto Power Down
This unit will be o itself to save electronic
consumption in the case main unit is not
connected to external device and is not used for 25
minutes. So does this unit after 6 hours since Main
unit has been connected to other device using
analog input.
CM4330-DU.DDEULLK ENG 7540.indd 21 2013-02-27  11:01:11