User guide

Operating20
Operating
3
Sleep Timer Setting
Press SLEEP on the remote control repeatedly to
select delay time between 10 and 180 minutes.
After delay time, the unit will turn o . (You can see
the following order, 180 ->150 -> 120 -> 90 -> 80
-> 70 -> 60 -> 50 -> 40 -> 30 -> 20 -> 10). To cancel
the sleep function, press SLEEP repeatedly until the
display window get bright.
• Press SLEEP. The remaining time appears in
the display window.
• Sleep function will work after dimmer
function.
,
Note
Dimmer
Press SLEEP once. The display window will
be darkened by half. To cancel it, press SLEEP
repeatedly until the display window get bright.
• After setting a clock function, you can set
alarm function.
• If you set the clock and alarm, you can check
the time and alarm icon “
(
“ by pressing
CLOCK although the unit is turned o .
• During playback, press TIMER two times
when the alarm icon “
(
“ is displayed. You
can check the setting state.
• If you activate the alarm, the alarm icon “
(
“
will appear in the display window.
• If you deactivate the alarm, the alarm icon
“
(
“ will disappear in the display window.
• Alarm function only works when the unit is
turned o .
• If the time you set is up, the unit will be
turned on automatically.
,
Note
Advanced Operation
Recording to USB
You can record various sound sources to USB.
1. Connect the USB device to the unit.
2. Select a function by pressing FUNCTION on the
remote control or FUNC. on the unit.
One track/file recording - You can record to USB
after playing a track/file you want.
All tracks/files recording - You can record to USB
after stop.
Program list recording - After showing the
programmed list, you can record it to USB.
(Refer to page 14)
3. Start the recording by pressing USB REC on the
remote control or
USB REC. on the unit.
4. To stop recording, press
Z
ENTER on the
remote control or
I
on the unit.
Pausing recording
During recording, press USB REC on the remote
control or
USB REC. on the unit to pause
recording. Press it again to restart recording.
(Only Radio/AUX)
To select recording bit rate
and speed
1. Press USB REC on the remote control or
USB REC. on the unit for longer than 3
seconds.
2. Use
C
/
V
on the remote control or
Y/
U
on the unit to select the bit rate.
3. Press USB REC on the remote control or
USB REC. on the unit again to select the
recording speed.
4. Press
C
/
V
on the remote control or
Y/U
on the unit to select a desired
recording speed : (AUDIO CD only)
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
CM4230_DU.DDEULLK ENG 0439.indd 20CM4230_DU.DDEULLK ENG 0439.indd 20 2013-03-20  2:05:182013-03-20  2:05:18