User guide

Operating22
Operating
2
Setting the clock by synchronizing
your iPod/ iPhone/iPad
Connect iPod/iPhone/iPad to the USB port using
the iPod/iPhone/iPad’s cable and select USB
function. Then the clock setting in the display
window will be synchronized with your iPod/
iPhone/iPad.
After the unit synchronized with your iPod/iPhone/
iPad for clock setting, there will be a time dierence
between the iPod/iPhone/iPad and the unit . In
power o state, the clock won’t be synchronized
with your iPod/iPhone/iPad.
Check the current time on iPod/iPhone/
iPad is correct or not. If not, reset it correctly
depending on present time. Wrong time on
the iPod/iPhone/iPad may result in the time
deerence between your iPod/iPhone/iPad
and the unit.
,
Note
Using your player as an alarm
clock
1. Turn the unit on.
2. Press and hold TIMER to set the alarm function.
3. Alarm sound sources will blink. While each of
sound sources blink, select the one you want by
pressing
I
ENTER or RDS/SET.
4. “ON TIME” will blink. This is your desired time to
turns unit on. Press
Y/U
to change the
hours and minutes and press
I
ENTER or RDS/
SET to save.
5. The “OFF TIME” will blink. This is your desired
time to turn unit off. Press
Y/U
to change
the hours and minutes and press
I
ENTER or
RDS/SET to save.
6. The volume setting will blink. Press
Y/U
to change the volume and press
I
ENTER or
RDS/SET to save.
7. Press TIMER to check the alarm information.
8. If you want to reset the clock, press and hold
TIMER.Then repeat step 3-6.
y
If you unplug the cord from an outlet, the
clock setting you set won’t be stored.
y
If you synchronize the unit with your BT
device for clock by using BT app, you can
set 12 - Hour Time (ex - PM 11 : 00) or 24 -
Hour Time (ex - 23 : 00).(Android O/S only)
y
If you set the clock, you can check the time
by pressing CLOCK although the player is
turned o.
y
If you set the clock and alarm, you can
check setting informaiton by pressing
TIMER although the unit is turned o. Then
this function will work in everyday.
y
Alarm function only works when the unit is
turned o.
y
When the alarm rings, you can deactivate
the alarm by pressing TIMER.
y
If the alarm rings with USB cable connected
to USB port, the function switches to tuner
function. (Depending on the type of device,
this may not be available.)
,
Note
CM3330G-DG.DDEULLG_ENG.indd 22 2013-02-21  12:36:17