User guide

Operating22
Operating
2
Setting the Clock
You have three ways to set the clock.
1. Turn the unit on.
2. Press CLOCK for at least 2 seconds.
3. Choose time mode by pressing
C
/
V
on
the remote control or
Y/U
on the unit.
- 12:00 (for an AM and PM display) or 0:00 (for a
24 hour display)
4. Press SET/RDS to confirm your selection.
5. Select the hours by pressing
C
/
V
on the
remote control or
Y/U
on the unit.
6. Press SET/RDS to confirm your selection.
7. Select the minutes by pressing
C
/
V
on
the remote control or
Y/U
on the unit.
8. Press SET/RDS to confirm your selection.
9. If you want to reset the clock, press and hold
CLOCK .Then repeat steps 3-8.
Setting the Clock through “LG
Bluetooth Remote” App
Install “LG Bluetooth Remote” app on your Android
device. (see page 26 - 27)
Your unit’s clock will be automatically synchronized
with your device by activating Bluetooth
connection through “LG Bluetooth Remote” app.
Setting the clock by synchronizing
your iPhone/iPod
Connect iPhone/iPod to the USB port using the
iPhone/iPod’s cable and select USB function. Then
the clock setting in the display window will be
synchronized with your iPhone/iPod.
After the unit synchronized with your iPhone/iPod
for clock setting, there will be a time dierence
between the iPhone/iPod and the unit . In power
o state, the clock won’t be synchronized with your
iPhone/iPod.
Setting the alarm
You can use the unit as an alarm clock.
You have to set the clock before setting the alarm.
1. Turn the unit on.
2. Press ALARM. Each of functions flashes.
3. Press SET/RDS when the function you want to
be woken by is showing.
4. “ON TIME” will be displayed. This is your desired
time to turns unit on. Press
C
/
V
on
the remote control or
Y/U
on the unit to
change the hours and minutes and press SET/
RDS to save.
5. Press
C
/
V
on the remote control or
Y/U
on the unit to change the volume
and press SET/RDS to save.
6. If you want to reset the alarm, press and hold
ALARM. Then repeat steps 3-5
y
Alarm function only works when the unit is
turned o after setting the alarm.
y
If you set the clock time and alarm, you can
check the time by pressing CLOCK or the
alarm by pressing ALARM even when the
unit is turned o.
y
If the alarm is already set, press ALARM
once to cancel the alarm. To activate the
alarm, press ALARM once again.
y
If the clock time or the alarm is already set,
press and hold CLOCK or ALARM for at
least 2 seconds to reset the clock or the
alarm.
,
Note
CM2540-DG.ADEULLK_8038-ENG.indd 22 2014-05-15 �� 2:09:32