User guide

Operating16
Operating
3
y
If the connection has an error, check these
problems as follows;
-
Your Android device is not connected rmly.
-
This unit recognizes your Android device as
an unknown device.
-
Your Android device is not booted.
-
Check the setting of USB connection type on
your Android device.
y
In case of no sound from this unit, adjust
the volume of your Android device.
y
The charging time may vary depending on
your Android device.
y
Some Android devices may not be charged.
y
You may not control your Android device
from this unit due to malfunction of Android
device.
y
Depending on your Android device’s
software version, it may not be possible
to control your Android device from this
unit. We recommend installing the latest
software version.
y
If your Android device does not support
AOA (Android Open Accessory) 2.0 version,
this unit can only charge your Android
device even though Android device has OS
4.1 (or later).
,
Note
Radio Operations
Listening to the radio
1. Press FUNCTION on the remote control or F
on the unit until TUNER appears on the display
window.
The last received station is tuned in.
2. Auto tuning : Press TUN.-/+ on the remote
control or
Y
/
U
on the unit for about 2
seconds until the existing frequency starts
changing, then release. Scanning stops when
the unit tunes in a station.
Manual tuning: Press TUN.-/+ on the remote
control or
Y
/
U
on the unit repeatedly.
3. Adjust the volume by pressing
VOL
o
/
p
on the remote control or rotate the
Volume Knob on the unit.
Presetting the Radio Stations
You can preset 50 stations for FM.
Before tuning, make sure to turn down the volume.
1. Press FUNCTION on the remote control or F
on the unit until TUNER appears on the display
window.
2. Select the desired frequency by pressing
TUN. -/+ remote control or
Y
/
U
on the
unit.
3. Press PROGRAM/MEMORY. A preset number
will blink on the display window.
4. Press PRESETFOLDER
W
/
S
to select the
preset number you want.
5. Press PROGRAM/MEMORY. The station is
stored.
6. Repeat steps 2 to 5 to store other stations.
7. To listen a preset station, press
PRESETFOLDER
W
/
S
.
Deleting all the saved stations
1. Press and hold PROGRAM/MEMORY for two
seconds. “CLEAR” will flash up on the display
window.
2. Press PROGRAM/MEMORY to erase all saved
radio stations.