User guide

Operating 23
Operating
2
To select recording bit rate
and speed
1. Press USB REC for longer than 3 seconds.
2. Use
Y/U
to select the bit rate.
3. Press USB REC again to select the recording
speed.
4. Press USB REC to finish the setting.
y
Do not remove the USB device or turn
o the unit during USB recording. If not,
an incomplete le may be made and not
deleted on PC.
y
If USB recording does not work, the
message like “NO USB”, “ERROR(USB ERR)”,
“FULL(USB FULL)”, ”NO SUPPO”or “NO REC” is
displayed on the display window.
y
Multi card reader device, External HDD,
mobile phone can not be used for USB
recording.
y
A le is recorded by about 512 Mbyte when
you record for a long term.
y
You may not store more than 999 les.
y
It’ll be stored as follows.
The other
source*
* : FM, PORTABLE and the like.
BT is not supported.
,
Note
The making of unauthorized copies of copy-
protected material, including computer
programs, les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal oense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
Using a Bluetooth
wireless technology
About Bluetooth
Bluetooth® is wireless communication technology
for short range connection.
The available range is within 10 meters.
(The sound may be interrupted when the
connection is interfered by the other electronic
wave or you connect the bluetooth in the other
rooms.)
Connecting individual devices under
Bluetooth® wireless technology does not incur any
charges. A mobile phone with
Bluetooth® wireless technology can be operated
via the Cascade if the connection was made via
Bluetooth® wireless technology.
Available Devices : Mobile phone, MP3, Laptop,
PDA.
Bluetooth Profiles
In order to use Bluetooth wireless technology,
devices must be able to interpret certain proles.
This unit is compatible with following prole.
A2DP (Advanced Audio Distribution Prole)
CM2330-DG.DDEULLK_ENG_6461.indd 23 2013-08-28  9:32:34