User guide

Operating20
Operating
3
To select recording bit rate
and speed (AUDIO CD only)
1. Press REC on the remote control for longer than
3 seconds.
2. Use
C
/
V
on the remote control or
Y/
U
on the unit to select the bit rate.
3. Press REC on the remote control again to select
the recording speed.
4. Press
C
/
V
on the remote control or
Y/U
on the unit to select a desired
recording speed :
X1 SPEED
- You can listen to music while recording it.
X2 SPEED
- You can just record the music file.
5. Press REC on the remote control to finish the
setting.

You can check the recording percentage
rate for the USB record on the display
window during the recording.
(MP3/WMA CD Only)

During recording MP3/WMA, there is no
sound.

When you stop recording during playback,
the  le that has been recorded at that time
will be stored. (Except MP3/WMA  les)

Do not remove the USB device or turn
o the unit during USB recording. If not,
an incomplete  le may be made and not
deleted on PC.

If USB recording does not work, the
message like “NO USB”, “ERROR”, “FULL” or “NO
REC” is displayed on the display window.

Multi card reader device or External HDD
can not be used for USB recording.

A  le is recorded by about 512 Mbyte when
you record for a long term.

It’ll be stored as follows.
AUDIO CD MP3/WMA
The other
source*
* : TUNER, PORTABLE and the like.
,
Note
The making of unauthorized copies of copy-
protected material, including computer
programs,  les, broadcasts and sound
recordings, may be an infringement of
copyrights and constitute a criminal o ense.
This equipment should not be used for such
purposes.
Be responsible
Respect copyrights
CM1930-DP.ADEULLK ENG 6449.indd 20CM1930-DP.ADEULLK ENG 6449.indd 20 2014-01-21  10:06:122014-01-21  10:06:12