User guide

English
11
English
Introduction
6 Menu Press “Menu” to launch the Onscreen
display (OSD), back to the top level of
OSD for the OSD main menu opera-
tion
7 Exit Press “Exit” to close the OSD menu.
8 Zoom+ Zoom in the projector display.
9 Reset Return the adjustments and settings
to the factory default values. (except
for lamp counter)
10 Auto Automatically synchronize the
projector to the input source.
11 Source Press “Source” to choose RGB,
S-Video, Composite and HDMI
sources.
12 Zoom- Zoom out the projector display.
13 Volume +/- Increase/decrease speaker volume.
14 Keystone +/- Adjust the image to compensate
for distortion caused by tilting the
projector.
15 Image Select the Image mode from
Presentation, Bright, Movie, sRGB,
and User.
16 AV Mute Momentarily turn off/on the audio
and video.
17 Ratio Use this function to choose your
desired aspect ratio.
18 RGB1 Press “RGB1” to choose RGB IN 1
connector.
19 HDMI Press “HDMI” to choose HDMI
connector.
20 RGB2 Press “RGB2” to choose RGB IN 2
connector.
21 S-Video Press “S-Video” to choose S-VIDEO
connector.