User guide

5 Troubleshooting
Troubleshooting42
Troubleshooting
5
Troubleshooting
General
Symptom Cause & Solution
The Power does not turn on.
y
Plug the power cord into the wall outlet securely.
y
The battery is discharged. Recharge the battery.
The unit does not start
playback.
y
Insert a playable disc. (Check the disc type, colour system, and
regional code.)
y
Place the disc with the playback side down.
y
Place the disc in the player correctly inside the guide.
y
Clean the disc.
y
Cancel the Rating function or change the rating level.
The angle cannot be changed.
y
Multi-angles are not recorded on the DVD Video being played.
Cannot play movie, photo or
music les.
y
The les are not recorded in a format that the unit can play.
y
The unit does not support the codec of the movie le.
The remote control does not
work properly.
y
The remote control is not pointed at the remote sensor of the unit.
y
The remote control is too far from the unit.
y
There is an obstacle in the path of the remote control and the unit.
y
The batteries in the remote control are exhausted.
The unit is plugged in, but the
power will not turn on or o.
You can reset the unit as follows.
y
Switch o the unit using the power switch on the unit and leave it for
5 seconds. Next, switch on the unit to reset.
The unit is not operating
normally.
BP690B-P.ANLDLLK_ENG.indd 42 6/24/11 2:11 PM