ENGLISH OWNER’S MANUAL Portable Blu-ray Disc™ Player Please read this manual carefully before operating your set and retain it for future reference. BP691B P/NO : MFL67201931 BP690B-P.ANLDLLK_ENG.
BP690B-P.ANLDLLK_ENG.
1 Getting Started Getting Started 3 Safety Information CAUTION CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK) NO USER-SERVICEABLE PARTS INSIDE REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. This lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated dangerous voltage within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Getting Started This device is equipped with a portable battery or accumulator. 1 Getting Started Safety way to remove the battery or the battery from the equipment: Remove the old battery or battery pack, follow the steps in reverse order than the assembly. To prevent contamination of the environment and bring on possible threat to human and animal health, the old battery or the battery put it in the appropriate container at designated collection points.
Getting Started 5 Notes on Copyrights 1 Getting Started yy Because AACS (Advanced Access Content System) is approved as content protection system for Blu-ray Disc format, similar to use of CSS (Content Scramble System) for DVD format, certain restrictions are imposed on playback, analog signal output, etc., of AACS protected contents.
Table of Contents Table of Contents 1 Getting Started 3 8 8 12 12 12 13 14 15 15 15 Safety Information Introduction – Playable Discs and symbols used in this manual – About the “7” Symbol Display – Supplied Accessories – File compatibility – AVCHD (Advanced Video Codec High Definition) – Certain System Requirements – Compatibility Notes – Regional Code Main Unit Remote control Using the touch sensor buttons Revolving the LCD panel Rechargeable battery 2 Connecting 16 16 16 16 17 18 19 19 19 Conn
Table of Contents 40 41 Audio CD Recording Enjoying the NetCast™ Entertainment Access 5 Troubleshooting 42 42 43 43 44 44 44 Troubleshooting – General – Network – Picture – Sound – Customer Support – Open source software notice 6 Appendix 45 45 45 47 48 49 50 51 52 52 52 53 Network Software Update – Network update notification – Software Update Area Code List Language Code List Trademarks and Licenses Audio Output Specifications Specifications Maintenance – Handling the Unit – Notes on Discs Import
Getting Started Introduction 1 Playable Discs and symbols used in this manual Getting Started Media/Term Logo Symbol e Blu-ray y u i r DVD-ROM Description yy Discs such as movies that can be purchased or rented. yy BD-R/RE discs that are recorded in BDAV format. yy BD-R/RE discs that contain Movie, Music or Photo files. yy ISO 9660+JOLIET, UDF and UDF Bridge format yy Discs such as movies that can be purchased or rented.
Getting Started ,,Note yy Depending on the recording software & the finalization, some recorded discs (CD-R/RW, DVD±R/RW, BD-R/RE) may not be playable. yy BD-R/RE, DVD±R/RW and CD-R/RW discs recorded using a personal computer or a DVD or CD Recorder may not play if the disc is damaged or dirty, or if there is dirt or condensation on the player’s lens.
Getting Started File compatibility Movie files 1 Getting Started File Extension “.avi”, “.mpg”, ”.divx”, “.mpeg”, “.mkv”, “.mp4”, “.asf” Codec Format DIVX3.xx, DIVX4.xx, DIVX5. xx, DIVX6.xx (standard playback only), XVID, MPEG1 SS, H.264/MPEG-4 AVC, MPEG2 PS, MPEG2 TS Audio Format Dolby Digital, DTS, MP3, WMA, AAC, AC3 Subtitle SubRip (.srt / .txt), SAMI (.smi), SubStation Alpha (.ssa/.txt), MicroDVD (.sub/.txt), VobSub (.sub), SubViewer 1.0 (.sub), SubViewer 2.0 (.sub/.txt), TMPlayer (.
Getting Started ,,Note yy The file name is limited to 180 characters. yy A “avi” file which is encoded “WMV 9 codec” is not supported. ,,Note yy This player supports UTF-8 files even it contains Unicode subtitle contents. This player can not support the pure Unicode subtitle files. 1 yy Depending on the types of file or ways of recording, it may not play back. yy The file requirements on page 10 are not always compatible. There may have some restrictions by file features.
1 Getting Started Certain System Requirements Regional Code For high definition video playback: This unit has a regional code printed on the rear of the unit. This unit can play only BD-ROM or DVD discs labeled same as the rear of the unit or “ALL”. yy High definition display that has HDMI input jacks. yy BD-ROM disc with high definition content. Getting Started yy HDMI or HDCP capable DVI input on your display device is required for some content (as specified by disc authors).
Getting Started Main Unit 13 use a/d to adjust the value. Press ENTER (b) to confirm the adjustment. yy RETURN (x): Exits the menu or resumes playback. The resume play function may not work depending on the BD-ROM disc. a yy HOME: Displays or exits the [Home Menu]. b yy TITLE/POPUP: Displays the DVD title menu or BD-ROM’s pop-up menu, if available. c j yy DISC MENU: Accesses menu on a disc. d e i f h k l m n g o p q 1 Getting Started f Function buttons yy Q.
Getting Started Remote control • • • • • • b • • • • • • Battery Installation SCAN (c/v): Searches backward or forward. 1 Getting Started SKIP (C/V): Goes to the next or previous chapter / track / file. PAUSE/STEP (M): Pauses playback. Press repeatedly for frame-by-frame playback. PLAY (d): Starts playback. STOP (Z): Stops playback. • • • • • • c • • • • • • 0-9 numerical buttons: Selects numbered options in a menu or inputs letters in the keypad menu.
Getting Started Using the touch sensor buttons revolving it. To revolve the LCD panel to its original position, open the LCD panel to a vertical position. Revolve the LCD panel counterclockwise slowly 180 degrees. yy When finished using the unit, return the LCD panel to its original position. yy Do not leave the LCD panel in the face-up position, or sudden shocks may damage it. Rechargeable battery >>Caution Precautions for using the touch sensor buttons: yy Use the touch pad with clean and dry hands.
Connecting Connecting the AC Adaptor Connect the unit to the power supply with the supplied AC Adaptor. Connecting to Your TV Make one of the following connections, depending on the capabilities of your existing equipment. yy Video connection (page 16) yy HDMI connection (page 17) ,,Note 2 Connecting Plug into a power source. yy Depending on your TV and other equipment you wish to connect, there are various ways you could connect the player.
Connecting HDMI Connection If you have a HDMI TV or monitor, you can connect it to this player using a HDMI cable (Type A, High Speed HDMITM Cable). Connect the HDMI jack on the player to the HDMI jack on a HDMI compatible TV or monitor. 17 ,,Note yy When you use HDMI connection, the picture will not be displayed on the LCD panel. yy If a connected HDMI device does not accept the audio output of the player, the HDMI device’s audio sound may be distorted or may not output.
Connecting Resolution Setting The player provides several output resolutions for HDMI OUT and LCD panel. You can change the resolution using [Setup] menu. 1. Press HOME (n). 2. Use a/d to select the [Setup] and press ENTER (b). The [Setup] menu appears. 2 3. Use w/s to select [DISPLAY] option then press d to move to the second level. Connecting 4. Use w/s to select the [Resolution] option then press ENTER (b) to move to the third level.
Connecting Connecting to an Amplifier Make one of the following connections, depending on the capabilities of your existing equipment. 19 Connecting to an Amplifier via HDMI Output Connect the player’s HDMI OUT jack to the corresponding in jack on your amplifier using a HDMI cable.
Connecting Connecting to an Amplifier via 2 Channel Audio Output Connect the Left and Right AV OUT jacks on the player to the audio left and right in jacks on your amplifier, receiver, or stereo system using audio cables. 2 Connecting to your Home Network This player can be connected to a local area network (LAN) via the LAN port on the rear panel. By connecting the unit to a broadband home network, you have access to services such as software updates, BD-Live interactivity and streaming services.
Connecting 21 3. Use w/s/a/d to select the IP mode between [Dynamic] and [Static]. Broadband service Normally, select [Dynamic] to allocate an IP address automatically. 2 ,,Note If there is no DHCP server on the network and you want to set the IP address manually, select [Static] then set [IP Address], [Subnet Mask], [Gateway] and [DNS Server] using w/s/a/d and numerical buttons. If you make a mistake while entering a number, press CLEAR to clear the highlighted part.
Connecting Notes on Network Connection: yy Many network connection problems during set up can often be fixed by re-setting the router or modem. After connecting the player to the home network, quickly power off and/ or disconnect the power cable of the home network router or cable modem. Then power on and/or connect the power cable again.
Connecting 23 USB device connection This player can play movie, music and photo files contained in the USB device. Playback content in the USB device 1. Insert a USB device to the USB port until it fits into place. ,,Note yy This player supports USB flash drive/ external HDD formatted in FAT16, FAT32 and NTFS when accessing files (music, photo, movie). However, for BD-Live and Audio CD recording, only FAT16 and FAT32 formats are supported.
3 System Setting 24 System Setting Settings [DISPLAY] Menu TV Aspect Ratio Adjust the Setup Settings You can change the settings of the player in the [Setup] menu. 1. Press HOME (n). Select a TV aspect ratio option according to your TV type. [4:3 Letter Box] Select when a standard 4:3 TV is connected. Displays theatrical images with masking bars above and below the picture. [4:3 Pan Scan] 3 System Setting 2. Use a/d to select the [Setup] and press ENTER (b). The [Setup] menu appears.
System Setting 25 Resolution HDMI Color Setting Sets the output resolution HDMI video signal. Refer to page 18 for details about the resolution setting. Select the type of output from the HDMI OUT jack. For this setting, please refer to the manuals of your display device. [Auto] If the HDMI OUT jack is connected to TVs providing display information (EDID), automatically selects the resolution best suited to the connected TV. [YCbCr] [1080p] Select when connecting to a DVI display device.
System Setting [AUDIO] Menu Each disc has a variety of audio output options. Set the player’s Audio options according to the type of audio system you use. ,,Note Since many factors affect the type of audio output, see “Audio Output Specifications” on page 50 for details. HDMI [PCM Stereo] 3 System Setting Select if you connect this unit’s HDMI OUT jack to a device with two-channel digital stereo decoder.
System Setting 27 DTS Neo:6 [LOCK] Menu If the player is connected to the multi-channel Audio Receiver by HDMI connection, set this option to enjoy the multi-channel surround sound with the 2-channel audio source. The [LOCK] settings affect only Blu-ray Disc and DVD playback. [Music] To access the any features in [LOCK] settings, you must enter the 4-digit security code you have created. If you have not entered a password yet, you are prompted to do so.
System Setting Blu-ray Disc Rating BD-Live connection Set an age limit of BD-ROM play. Use number buttons to input an age limit for BD-ROM viewing. You can restrict Internet access when BD-Live functions are used. [255 Year(s)] [Permitted] All BD-ROM can be played. Internet access is permitted for all BD-Live contents. [0-254 Year(s)] Prohibits play of BD-ROM with corresponding ratings recorded on them.
System Setting 29 Auto Power Off The screen saver appears when you leave the player in Stop mode for about 5 minutes. If you set this option to [On], the unit automatically turns itself off after the Screen Saver is displayed for 5 minutes. Set this option to [Off ] to leave the screen saver until the unit is operated by the user. Initialize [Factory Set] You can reset the player to its original factory settings.
4 Operating 30 Operating General Playback ,,Note Using [HOME] menu yy Playback functions described in this manual are not always available in every file and media. Some functions can be restricted depending on many factors. The home menu appears when you press HOME (n). Use a/d to select a category and press ENTER (b). yy Depending on the BD-ROM titles, a USB device connection may be needed for the proper playback. yy Unfinalized DVD-VR format discs may not be played in this player.
Operating 31 Enjoying BD-LiveTM e Basic operations for video and audio content BD-ROM supporting BD-Live (BD-ROM version 2 Profile 2) that has a network extension function allows you to enjoy more functions such as downloading new movie trailers by connecting this unit to the internet. To stop playback 1. Check the network connection and settings (page 20). Press M (PAUSE/STEP) while playback. Press d (PLAY) to resume playback. 2. Insert a USB storage device to the USB port on the unit.
Operating Basic operations for photo content To play a slide show Press d (PLAY) to start slide show. To stop a slide show Press Z (STOP) while slide show. To pause a slide show Press M (PAUSE/STEP) while slide show. Press d (PLAY) to re-start the slide show. To skip to the next/previous photo While viewing a photo in full screen, press a or d to go to the previous or next photo.
Operating 33 Advanced Playback Repeat Playback erotu y During playback, press REPEAT repeatedly to select a desired repeat mode. Blu-ray Discs/DVDs/ MOVIE jA- – Selected portion will be repeated continually. Repeating a specific portion eroty This player can repeat a portion you have selected. 1. While playback, press REPEAT to select [A-] at the beginning of the portion you wish to repeat. 2. Press ENTER (b) at the end of the portion. Your selected portion will be repeated continually. 3.
Operating Marker Search eroy Using the search menu eroy You can start playback from up to nine memorized points. Using search menu, you can easily to find the point where you want to start playback. To enter a marker To search a point 1. While playback, press MARKER at the desired point. The Marker icon appears on the TV screen briefly. 1. During playback, press SEARCH to display the search menu. 2. Repeat step 1 to add up to nine markers. To recall a marked scene 1.
Operating 35 Changing content list view yui Viewing content information y On the [Movie], [Music] or [Photo] menu, you can change the content list view. The player can display the content information. Method 1 2. Press Q.MENU (m) to display the option menu. Press red (R) colored button repeatedly. 1. Select a file using w/s/a/d. 3. Select the [Information] option using w/s, and press ENTER (b). The file information appears on the screen.
Operating Options while viewing a photo i You can use various options during viewing a photo in full screen. 1. While viewing a photo in full screen, press Q.MENU (m) to display the option menu. 2. Select an option using w/s. Listening to music while slide show i You can display photo files while listening to music files. 1. While viewing a photo in full screen, press Q.MENU (m) to display the option menu. 2.
Operating 37 On-Screen display You can display and adjust various information and settings about the content. Displaying content information on-screen eroy 1. While playback, press Q.MENU (m) to show various playback information. ,,Note yy If no button is pressed for a few seconds, the on-screen display disappears. yy A title number cannot be selected on some discs. yy Available items may differ depending on discs or titles.
Operating Hearing a different audio eroy 1. During playback, press Q.MENU (m) to display the On-Screen display. 2. Use w/s to select the [Audio] option. 3. Use a/d to select desired audio language, audio track or audio channel. ,,Note 4 Watching from a different angle er If the disc contains scenes recorded at different camera angles, you can change to a different camera angle during playback. 1. During playback, press Q.MENU (m) to display the On-Screen display.
Operating 39 Changing the Picture Mode eroy Changing subtitle code page y You can change the [Picture mode] option while playback. If the subtitle is displayed in broken letter, you can change the subtitle code page to view the subtitle file properly. 1. During playback, press Q.MENU (m) to display the On-Screen display. 2. Use w/s to select the [Picture Mode] option. 3. Use a/d to select desired option. 4. Press RETURN (x) to exit the On-Screen display. 1. During playback, press Q.
Operating Audio CD Recording You can record one desired track or all of the tracks in Audio CD to a USB storage device. 1. Insert a USB storage device to the USB port on the unit. 2. Insert an Audio CD. The playback starts automatically. 3. Press Q.MENU (m) to display the option menu. 4. Use w/s to select [CD Recording] option, and press ENTER (b). 5. Use w/s to select a track you wish to copy on the menu, and press ENTER (b). Repeat this step to select tracks as many as you can.
Operating 41 Enjoying the NetCast™ Entertainment Access You can use various content services via Internet with the NetCast Entertainment Access feature. 1. Check the network connection and settings (page 20). 2. Press HOME (n). 3. Select the [NetCast] using a/d, and press ENTER (b). 4. Select an option using a/d, and press ENTER (b). yy Detailed information of each service, contact to the content provider or visit support link of the service.
5 Troubleshooting 42 Troubleshooting Troubleshooting General Symptom Cause & Solution The Power does not turn on. yy Plug the power cord into the wall outlet securely. yy The battery is discharged. Recharge the battery. The unit does not start playback. yy Insert a playable disc. (Check the disc type, colour system, and regional code.) yy Place the disc with the playback side down. yy Place the disc in the player correctly inside the guide. yy Clean the disc.
Troubleshooting 43 Network Symptom Cause & Solution BD-Live feature does not yy The connected USB storage may not have enough space. Connect the USB storage with at least 1GB free space. work. yy Ensure that the unit is correctly connected to the local area network and can access the internet (see page 20). yy Your broadband speed may not fast enough to use the BD-Live features. Contact your Internet Service Provider (ISP) and increase the broadband speed is recommended.
Troubleshooting Sound Symptom Cause & Solution There is no sound or the sound is distorted. yy The volume is set to minimum. Use the volume controller to adjust the volume. yy The earphone jack is connected to the unit. Separate the earphone jack from the unit. yy Connect the audio connection securely. yy The input source setting on the amplifier or the connection to the amplifier is incorrect. yy The unit is in scan, slow motion, or pause mode. yy The sound volume is low.
6 Appendix Appendix 45 Network Software Update Network update notification From time to time, performance improvements and/or additional features or services may be made available to units that are connected to a broadband home network. If there is new software available and the unit is connected to a broadband home network, the player will inform you about the update as follows.
Appendix 5. Select [OK] to download the update. (Selecting [Cancel] will end the update.) 6. The player starts downloading the newest update from the server. (Downloading will takes several minutes depending on your home network condition) 7. When downloading is completed, the message, “Download is complete. Do you want to update?” appears. 8. Select [OK] to start updating. (Selecting [Cancel] will end the update and downloaded file will not be re-usable.
Appendix 47 Area Code List Choose an area code from this list.
Appendix Language Code List Use this list to input your desired language for the following initial settings: [Disc Audio], [Disc Subtitle] and [Disc Menu].
Appendix 49 Trademarks and Licenses Blu-ray Disc™, Blu-ray™, BD-Live™, BONUSVIEW™ and the logos are trademarks of the Blu-ray Disc Association. Java and all Java-based trademarks and logos are trademarks or registered trademarks of Sun Microsystems, Inc. in the United States and other countries. Manufactured under license under U.S. Patent #’s: 5,451,942; 5,956,674; 5,974,380; 5,978,762; 6,226,616; 6,487,535; 7,212,872; 7,333,929; 7,392,195; 7,272,567 & other U.S. and worldwide patents issued & pending.
Appendix Audio Output Specifications Jack/Setting Source HDMI OUT PCM Stereo PCM Multi-Ch DTS Re-encode *3 Primary Pass-Thru *1 *2 Dolby Digital PCM 2ch PCM 2ch DTS Dolby Digital Dolby Digital Plus PCM 2ch PCM 2ch DTS Dolby Digital Plus Dolby TrueHD PCM 2ch PCM 2ch DTS (2ch) Dolby TrueHD DTS PCM 2ch PCM 5.1ch DTS DTS DTS-HD PCM 2ch PCM 7.1ch DTS DTS-HD Linear PCM 2ch PCM 2ch PCM 2ch DTS Linear PCM 2ch Linear PCM 5.1ch PCM 2ch PCM 5.1ch DTS Linear PCM 5.
Appendix 51 Specifications General Power requirements 12 V 0 2 A AC adaptor requirements 100 - 240 V ~ 1 A, 50/60 Hz Automotive Adaptor requirements 8.5 V -16 V DC Power consumption 18 W Dimensions (W x H x D) Approx. (281 x 41 x 174.5) mm Net Weight (Approx.) 1.4 kg Operating temperature 5 °C to 40 °C Operating humidity 5 % to 90 % Outputs yy ø 3.5 mm mini jack x 1 AUDIO/VIDEO OUT yy Video Out: 1.0 V (p-p), 75 Ω, sync negative yy Audio Out: 1.
Appendix Maintenance Notes on Discs Handling Discs Handling the Unit When shipping the unit Please save the original shipping carton and packing materials. If you need to ship the unit, for maximum protection, re-pack the unit as it was originally packed at the factory. Keeping the exterior surfaces clean yy Do not use volatile liquids such as insecticide spray near the unit. yy Wiping with strong pressure may damage the surface.
Appendix 53 Important Information Relating to Network Services All information, data, documents, communications, downloads, files, text, images, photographs, graphics, videos, webcasts, publications, tools, resources, software, code, programs, applets, widgets, applications, products and other content (“Content”) and all services and offerings (“Services”) provided or made available by or through any third party (each a “Service Provider”) is the sole responsibility of the Service Provider from whom it ori
BP690B-P.ANLDLLK_ENG.
