User guide

Procedure

1. Remove the battery holder by holding down the side

release  rmly and pulling out the battery holder.

2. Insert a CR2025 coin cell battery and align the polarity

correctly according to the marking in the battery holder.

Ensure that the side with a “+” is facing up.

3. Replace the battery holder. 

Lithium Cell

English

Introduction

Remote Control Battery Installation

Warning: To ensure safe operation, please observe the following precautions :

■ Use CR2025 type battery.

■ Avoid contact with water or liquid.

■ Do not expose the remote control to moisture or heat.

■ Do not drop the remote control.

■ If the battery has leaked in the remote control, carefully wipe the case clean and install new battery.

■ Risk of an explosion if battery is replaced by an incorrect type.

■ Dispose of used battery according to the instructions.

Lithium Cell

When you use the

remote control for

the  rst time, there

is a plastic sheet

between the battery

and its contact.

Remove the sheet

before use.