User guide

50
CUSTOMIZING SETTINGS
Item Description
Auto
Power
Make the projector turn on automatically when the power cord is con-
nected.
Item
On The projector turns on automatically when the power cord is
connected to the projector.
Off The projector goes into standby mode when the power cord
is connected to the projector.
Auto Input
Search
Automatically searches and displays an input signal type when it is
received.
High
Altitude
When using the projector at an altitude of 1200 m or higher, set this
option to “On.” Using the projector without changing the High Altitude
option may result in overheating or activation of the projector’s protec-
tion functions. If this happens, turn the projector off and then on again
after waiting several minutes.
Monitor
Out
Selects one of the two connected RGB input videos as monitor
out.“Auto” mode outputs the “RGB1” or “RGB2” input that is currently
being displayed.
DivX(R)
VOD
Sets DivX-related settings.
Initial
Setting
Resets all projector settings to the factory default.
Set ID If the projector is connected to a PC through an RS-232C cable, you
can use the PC to control functions of the projector such as power On/
Off and input selection.
eZ-Net
Manager
Allows you to control one or more projectors easily through a local area
network.
Lamp Use
Time
Checks lamp usage time.
Self
Diagnosis
Troubleshoots functional problems that can arise while using
the product.