User guide

49
CUSTOMIZING SETTINGS
OPTION Settings
1 Press the SETTINGS button.
2 Use the 󱛨, 󱛩, 󱛦, or 󱛧 button to select
OPTION, then press the OK
ꔉ
button.
3 Use the 󱛨, 󱛩, 󱛦, or 󱛧 button to set up the
desired item, then press the OK
ꔉ
button.
- To return to the previous menu, press the
󰎒
BACK button.
4 Press the EXIT button when completed.
The available option settings are described below:
Item Description
Language Selects the desired language.
SCREEN
SHARE
The SCREEN SHARE displays the screen of the connected device.

You can check the SCREEN SHARE's ID.
Item
Group This is the Group setting for each device supporting the
SCREEN SHARE feature. When the wireless connection
is weak or unstable, adjust the Group setting to correct the
problem.
Channel You can change the channel used for wireless connections.

Search Channels: Select channel searching methods.
- Auto: The projector searches for available channels and
automatically selects the least used channel.
- Manual: You can select a channel manually.

Channel: This is shown when Search Channels is set to
Manual. It allows you to specify a channel number to use.
Caption Turns subtitles On/Off when Korean is used for the AV input.
Keystone To prevent the screen image from becoming trapezoidal, Keystone
adjusts the top and bottom width of the image if the projector is not set
up at a right angle to the screen.
PJT Mode Turns the projected image upside down or ips it horizontally.

Select Rear to project an image onto the back of a transparent
screen (purchased separately).

Select Front Ceiling if you installed the projector onto a ceiling.
Blank
Image
Select the background for the blank image. (See 26 page)
OPTION
• Language
• SCREEN SHARE : [PJTR][LG]BC775[0000]
• Group
• Channel
• Caption
• Keystone
• PJT Mode : Front
• Blank Image : Blue
ꔂ Move ꔉ OK