User guide

70
Appendix
2.12Keystone ↓
2.15 Auto PC Adjust
2.13 Menu on
2.14 Menu off
2.16 Input mode read
2.17 Auto setup
Command “A8F”[CR] (Hex:0x41 0x38 0x46 0x0d)
Details Keystone ↓
Return OK "-" [CR]
NG “?” [CR]
Command “A89”[CR] (Hex:0x41 0x38 0x39 0x0d)
Details Auto PC Adjustment function
Return OK "-" [CR]
NG “?” [CR]
Command “A1C”[CR] (Hex:0x41 0x31 0x43 0x0d)
Details Open the on-screen menu
Return OK "-" [CR]
NG “?” [CR]
Command “A1D”[CR] (Hex:0x41 0x31 0x44 0x0d)
Details Close the on-screen menu
Return OK "-" [CR]
NG “?” [CR]
Command “AR1”[CR] (Hex:0x41 0x52 0x31 0x0d)
Details Get the current input mode.
1-HDMI 2-RGB1 3-RGB2 4-Component 5-S-Video 6-Video 7-RGBHV
Return OK 1 [CR] : HDMI
2 [CR] : RGB 1
3 [CR] : RGB 2
4 [CR] : Component
5 [CR] : S-Video
6 [CR] : Video
7 [CR] : RGBHV
NG “?” [CR]
Command “AW AUTOSETUP START”[CR]
(Hex: 0x41 0x57 0x20 0x41 0x55 0x54 0x4F 0x53 0x45 0x54 0x55
0x50 0x20 0x53 0x54 0x41 0x52 0x54 0x0d)
Details Start the auto setup function.
Return OK "000" [CR]
NG “?” [CR]
2.18 Still on
Command “A43”[CR] (Hex:0x41 0x34 0x33 0x0d)
Details Still on.
Return OK "-" [CR]
NG “?” [CR]