User guide

68
Appendix
2. Commands
Case sensitive, each command end by[CR](Carriage). The time out for each command is one
second. If you want to cancel the time out setting temporarily. Please send "#!"[CR].( It should be
sent within one second).
2.1 POWER ON
2.2 POWER OFF(Power OFF immediately)
Command Item Command Item
A00 POWER ON A89 Auto PC Adjust
A01 POWER OFF
(Power OFF
immediately)
AW LAMPMODE NORMAL Lamp mode normal
A02 POWER OFF AW LAMPMODE ECO Lamp mode eco
A05 RGB1 A30 Digital zoom +
A06 RGB2 A31 Digital zoom -
A07 Component AW SCREEN WIDE 16:9
A33 Video AW SCREEN FULL 4:3
A34 S-Video AW SCREEN NORMAL Normal
AW TERMINAL COMPUTER RGB 2:Input AW SCREEN CUSTOM Custom
AW TERMINAL MONITOR RGB 2:Output A19 Dynamic
A8E Keystone ↑ A11 Standard(Image select)
A8F Keystone ↓ A12 Cinema
A1C Menu on A39 Colorboard
A1D Menu off A3A Navigation right
AR1 Input mode read A3B Navigation left
AW AUTOSETUP START Auto setup A3C Navigation up
A43 Still on A3D Navigation down
A44 Still off A3F Select
A0D Blank on A36 HDMI
A0E Blank off A37 RGBHV
A8A Timer AW LAMPMODE AUTO Lamp mode auto
Command “A00”[CR] (Hex:0x41 0x30 0x30 0x0d)
Details Power ON when projector standby
Return OK "-" [CR]
NG “?” [CR]
Command “A01”[CR] (Hex:0x41 0x30 0x31 0x0d)
Details Power OFF immediately
Return OK "-" [CR]
NG “?” [CR]
2.3 POWER OFF
Command “A02”[CR] (Hex:0x41 0x30 0x32 0x0d)
Details "Power off?" displays while send the command, just like press the
"POWER"key.
Return OK "-" [CR]
NG “?” [CR]