User guide

19
WATCHING TV / PROGRAMME CONTROL
■ Left icon is to distinguish the external input of TV and the wireless external input of
Wireless Media Box.
■ After the Wireless Ready Dongle is successfully installed, wireless external input will be
shown additionally in the TV menu related to external input. (Input List, Input Label,
Timer, Input Block and Picture Wizard)
■ Operate the external input of Wireless Media Box using the remote controller of the TV.
■ When an external device is connected to the Media Box, if the wireless connection is
disconnected while the user is changing the settings for video, audio, and other options,
the changed settings may not be applied completely. If this occurs, try to carry out the
setup again when a wireless device is connected.
Wireless Signal
■ When you press the OK button while viewing the external input of
Wireless Media Box, the information of the current input and the
strength of the wireless signal will be displayed on the bottom left
side. (When you press the BACK/EXIT button, the information will
disappear.)
■ If you press the / I (Power) button of the Wireless Media Box manually to turn it off when both
the TV and Wireless Media Box are turned on, you will not be able to turn on the power using
the remote controller of the TV. At this time, press the / I (Power) button of the Wireless Media
Box to turn on the power.