User guide

17
EXTERNAL EQUIPMENT SETUP
NOTE
► There may be interference relating to resolution,
vertical pattern, contrast or brightness in PC
mode. Change the PC mode to another resolution
or change the refresh rate to another rate or
adjust the brightness and contrast on the menu
until the picture is clear. If the refresh rate of the
PC graphic card can not be changed, change the
PC graphic card or consult the manufacturer of
the PC graphic card.
► The synchronization input waveform for Horizontal
and Vertical frequencies are separate.
► Connect the signal cable from the monitor output
port of the PC to the RGB (PC) port of the
Wireless Media Box or the signal cable from the
HDMI output port of the PC to the HDMI IN (or
HDMI/DVI IN) port on the Wireless Media Box.
► Connect the audio cable from the PC to the Audio
input on the Wireless Media Box. (Audio cables are
not included with the Wireless Media Box).
► DOS mode may not work depending on the video
card if you use an HDMI to DVI cable.
► If you use too long an RGB-PC cable, there may be
interference on the screen. We recommend using
under 5m of cable. This provides the best picture
quality.
► When an unsupported resolution or graphic card is
used on the PC, it may cause some errors.
SUPPORTED DISPLAY RESOLUTION
RGB-PC, HDMI/DVI-PC mode
Resolution
Horizontal
Frequency(kHz)
Vertical
Frequency(Hz)
720x400 31.468 70.08
640x480 31.469 59.94
800x600 37.879 60.31
1024x768 48.363 60.00
1280x768 47.78 59.87
1360x768 47.72 59.80
1280x1024 63.981 60.02
1920x1080
(RGB-PC)
66.587 59.93
1920x1080
(HDMI-PC)
67.5 60.00