User guide

A13
Specifications
NOTE
Information in this document is subject to change without notice.
17 inches (16.06 inches viewable)
90 degree deflection
0.23 mm / 0.27 mm (Ph/Pp)
AGARAS(Anti-Glare Anti-Reflective Anti-Static) coating (710S)
Horizontal Freq. 30 - 71kHz (Automatic)
Vertical Freq. 50 - 160Hz (Automatic)
Input Form Separate TTL, Positive/Negative
Signal Input 15 pin D-Sub Connector
Input Form Separate, RGB Analog, 0.7Vp-p/75 ohm, Positive
Max VESA 1280 x 1024 @60Hz
Recommend VESA 1024 x 768 @85Hz
DDC 2B
710E/710S 710B
Normal 63 W Normal 63 W
Stand-by/Suspend ≤4 W Stand-by/Suspend ≤3 W
DPM Off ≤ 4 W DPM Off ≤ 3 W
Width 40.0 cm / 15.74 inches
Height 39.75 cm / 15.65 inches
Depth 41.1 cm / 16.18 inches
Net 14.0 kg (30.86 lbs)
AC 100-240V~ 50/60Hz 2.0A
Operating Conditions
Temperature 0˚C to 40 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Attached ( O ), Detached ( )
Wall-out type or PC-outlet type
710E:NON MPR
710S:MPR II
710B:TCO99
Picture Tube
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
&Weight
(with tilt/ swivel
stand)
Power Input
Environmental
Conditions
Tilt/Swivel Stand
Signal cable
Power cord
Regulations