LAS LCD TV MODELS: 32LC2D 32LC2DU 37LC2D 42LC2D MODELS: TV 42PC3D 42PC3DV 50PC3D 60PCl D OWNER'S MANUAL Internet ENERGYSTAR guidelines Environmental Home Page : http://www.lge.com http://wwwJg.ca is a set of power-saving issued by the Protection U.S. Agency(EPA). Please Retain read this manual carefully it for future reference. before Record modem number number See the Parmer LGE U. S. A.,lnc.
Warning r n !n CAUTION WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. ,i_ the presence of uninsulated "dangerous voltage" within the product's enclosure that may be of suffiThe lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to cient magnitude to constitute a risk of electric shock to persons.
Safety Instructions ! S|ructio S f WARNING • To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. iMPORTANT SAFETY iNSTRUCTiONS 1. Read these instructions. 8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat. 2.
Safety Instructions S 12. Use only with a cart, stand, tripod, bracket, specified by the manufacturer, or table 14. Refer or sold with the appa- all servicing Servicing to qualified is required service when the apparatus personnel. has been ratus. When a cart is used, use caution when moving damaged in any way, such as power supply cord or the cart / apparatus combination plug is damaged, to avoid injury from (9 tip-over.
Contents C 0 Bt e n | s 2 Warning 3~4 Safety instructions 7 Accessories 8~11 Controls Connection 12~13 i!!!liii/ll/ll!i lilliii! Options Remote Control Key Functions 14 15 16-17 Attaching the TV to a wall Desktop Pedestal Installation Basic Connection 18 19-20 20 21-22 23-24 25 25 26-28 Antenna or Cable Connection VCR Setup External AV Source Setup DVD Setup HDSTB Setup AV Out Setup Digital Audio Output PC Setup I 29 29 29 29 30 Turning on the TV Volume Adjustment Channel Selection On Scre
Contents 44 44 45 45 46 Manual Clock Setup Auto Clock Setup On/Off Timer Setup Sleep Timer Auto Off 47 48 49 49 50 Aspect Ratio Control Caption/Text Caption Option Low Power (42PC3D/3DV, 50PC3D, 60PC1D Only) ISM (Image Sticking Minimization) Method (42PC3D/3DV, Only) 51_52 Parental Lock Setup 53~58 External 59~60 IR Codes 61 Programming the Remote 62~63 Programming Codes 64~65 Troubleshooting 65 Maintenance 66~67 Product Specifications Control Device Setup Checklist 50PC3D, 60PC1D
Introduction ! | r Od UC| i!!i On i Accesso !es r= Ensure that the following accessories are included with your TV. If any accessory is missing, please contact the dealer from where you purchased the product. User must use shielded signal interface cables(D-sub 15 pin cable) with ferrite cores to maintain standard compliance for the product. Power Cord 75D Round Cable For 42PC3D/3DV, 50PC3D 2-eye-bolts 2-TV brackets 2-Wall brackets Twister Holder Arrange the wires with the twister holder.
Introduction Controls (Model Name: 42PC3D/3DV, 50PC3D, 60PC1D) - This is a simplified representation of front panel. - This picture shown below may be somewhat different from your TV. 42PC3D/3DV, 50PC3D = CHANNEL (A, V') Buttons - VOLUME Buttons (_,_) ENTER Button MENU Button INPUT Button Remote Control Sensor (b/t (Power) Button Power/Standby Indicator ,, illuminates red in standby mode. ,, illuminates green when the set is switched on.
Introduction ConnectionOptions (Model Name: 42PC3D/3DV, 50PC3D, 60PC1D) - This picture shown below may be somewhat different from your TV. S-VIDEO Input Provides better picture quality than the video input. AUDIO Input Connections are available for listening to stereo sound from an external device. VIDEO Input Connects the video signal from a video device. @COMPONENT IN @ RGB IN (PC) Connect a component these jacks. video/audio device to @AV OUT Connect a second TV or monitor.
Introduction Controls (Model Name: 32/37/42LC2D, 32LC2DU) - This is a simplified representation of front panel. - This picture shown below may be somewhat different from your TV. (A, _) Buttons (_,_) Buttons -- ENTER Button Button -- INPUT Button -- (b/l (Power) Button Remote Control Sensor Power/Standby Indicator ,, illuminates red in standby mode. ,, illuminates green when the set is switched on.
Introduction i " n s (Model Name: 32/37/42LC2D, 32LC2DU) Connecton Optlo - This picture shown below may be somewhat different from your TV. S-VIDEO Input Provides better picture quality than the video input. VIDEO Input Connects device. the video signal from a video AUDIO Input Connections are available for listening to stereo sound from an external device. @COMPONENT IN @ RGB IN (PC) Connect a component these jacks.
Introduction Remote C:ontro! Key Functions Turns your TV or any other programmed equipment on or In AV! _2; ComPonent 1:2; or RGB-PC, HDMI!!DVl, and HDM!2 input sources, screen returns t0 the last TV channe!. _ ....... _- ' h MODE::l INPUT External input modes rotate in regular sequencei Tv, AVl:2, Competent i_21 RGB-PC, HDM!!/DVI 0r HUM!2, (AV !-2, C0mp0nent !-2; RGB:PC, HDMI!/DV! or HDM!2 input sources are linked automatically, only if these are connected.
Introduction VCBiOVOJBVNSJC",.c,,.,o' BU 'ONS control some video cassette recorders or DVD players TV INPUT _ INPUT ( RECORD button is net available for DVD player). Increases/decreases the sound level. CHANNEL UPiDOWN Selects availab e channels found with EZ scan and Manual scan Use to scroll the Favorite channels. J NUMBER BUTTONS Used to enter a program number f0r mu!tipie program chan- Returns to the last Channel viewed.
Introduction ! I 32/37/42LC2D, 32LC2DU _ Open the battery compartment matching cor_ Use a remote control _Close I -). #_Install two ] .5V AA batteries. used batteries ! 60PC1D cover on the back side and instal[ the batteries rect polarity (+with +,-with 42PC3D/3DV, 50PC3D Don't mix old or 30 degree with new ones. (left/right) up to 7 meters distance within the receiving and unit scope. _ Dispose of used batteries serve environment.
Installation I n St a ! [a t i1 on DESKTOPPEDESTALINSTALLATION For proper ventilation, allow a clearance 42PC3D/3DV, of 4inches on each side from the wall. 50PC3D, 60P01D 32/37/42LC2D, 32LC2DU iiii_i!i!iiiii_iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii_i_i_i_i_iii_i_i!_iiiii!ii_i_;i;1i!!!_i_!_ii!ii_!_iiIi!_i_iiiiIi_i_iiiii[iiii[ii _; This picture shown below may be somewhat different from your TV.
Basic Connection (For 32/37/42LC2D, 32LC2DU) Connect the cables as necessary. After connecting the cables neatly, arrange the cables to the Cable Holder. To connect an additional equipment, see the External equipment Connections section. 32LC2D/U 37/42LC2D Reinstall the CABLE MANAGEMENT as shown. 32LC2D/U 3 Bundle the cables using the supplied twister holder. 32LC2D/U 16 37/42LC2D ¢_ Do not hold the CABLE MANAGEMENT when moving the product.
B as!c Connection w Place the set with the screen facing down on a cushion or soft cloth as shown• Before unfolding the stand, please make sure two locks (A) on the bottom of the stand push outward• /+: _++':"-,, 2 Pull the stand out as shown• After unfolding the stand, please insert and tighten the screws (provided as parts of the product) in the holes (B) on the bottom of the stand• (B) (A) This may cause the set to fall, causing serious bodily injury and serious damage to the set.
Installation Exte r n a[ NOTE: ,,,;,;; q u I p me n t Co All cables shown are not included nec|:! o s with the TV - Antenna or Cable Service without a Cable Box Connection For optimum picture quality, adjust antenna direction if needed.
Installation - To avoid picture noise (interference), leave an adequate distance between the VCR and TV. - Typically a frozen still picture from a VCR. if the 4:3 picture format of the screen may remain visible on the screen. " _" e VCR @ .......... @ _ .£_,[_ is used; the fixed images on the sides @ Connect the RF antenna out socket of the VCR to the Antenna s0cket on the set @ @ Connect the antenna cable t0the socket of the VCR RF antenn a in /R/AUDioILl WDEO ,.
Installation VIDE0 @ [ inPut on the set. The picture quality is Select AV! input source With using the NPUT button on the remote control. _ !f connected to AV IN2, se!ect AV2 input s0urce. Do not c0nnect to both Video and STVideo at the same time: In the e_ent tha t you Connect L "t both Video and the S-Video cables, only the S-Video will work. @ Connect the AUDIO/VIDEO and external equipment.
Installation O Select AV1 input source with using the iNPUT button on the remote control. !t connected to AV IN2, select AV 2 input source. Refer to the DVD player's manual for operating instructions. m Connect the HDMI output of the DVD to the NDMI IN 1(DVl) or 2 jack on the set. Select NDMiliDVl or NDMI2 input source with using the iNPUT button on the remote control. _ Refer to the DVD player's manual for operating instructions.
Installation DVD @ Connect the video outputs (Y. PB. PR'} of the DVD to the COMPONENT Connect the audio outputs of the DVD to the COMPONENT IN VIDEO jacks on the set. IN AUDIO jacks on the set. Turn on the DVD player, insert a DVD. Select Component 1 input source with using the INPUT button on the remote control. - If connected to COMPONENT IN 2. select Component 2 input source. Refer to the DVD player's manual for operating instructions.
Installation - This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below. m @ Connect the HDMI output of the digital set-top box to the HDMI IN 1(DVl) or 2 jack on the set. ® O Select HDMI1iDVI or HDMI2 input source with using the INPUT button on the remote control Turn on the digital set-top box.
Installation r ............................................. AUD0N nEM_E @@ DVI-DTV OUTPUT m AU[}IO _L_ Digital Set-top Box @ Connect the DVl output of the digital set-top box to the HDMI IN I(DVI) jack on the set. Connect the audio outputs of the set-top box to the AUDIO IN(RGB/DVI) 9 jack on the set. Turn on the digital set-top box. (Refer to the owner's manual for the digital set-top box.) Select HDMI1!DVI input source with using the INPUT button on the remote control.
Installation - The TV has a special signal output capability which allows you to hook up a second TV or monitor. oTv,np0, sou for Monitor out. We recommend to use the video and audio ,0,,00,o,L, v,oEo - Send the TV's audio to external audio equipment 2_® ®R (stereo system) via the Digital Audio Output Optical port. @ Connect one end of an optical cable to the TV Digital Audio Optical Output port.
Installation - This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. (PC) jack on the set . , _ ® i [ _ Connect the PC audo outputs to the AUDIO . ........................................................... m ® ................ Connect the DVI output of the PC to the HDMI IN l(DVi) _ i PC jack on the set. Connect the audio outputs of the PC to the AUDIO IN(RGB!DVl) jack on the set. Turn on the PC and the set.
Installation 1. Depending on the graphics card, DOS mode may not work if a HDMI to DVI Cable is in use. 2. When Source Devices connected with HDMI/DVl Input, output PC Resolution (VGA, SVGA, XGA, WXGA), Position and Size may not fit to Screen.Press the ADJUST button to adjust the screen Position of TV SET and contact an PC graphics card service center. 3. When Source Devices connected with HDMI/DVl Input, output TV SET Resolution (480p, 720p, 1080i.
Installation When RGB connect to PC input and select the RGB-PC. this function is used. - When HDMt/DVI connect to PC input and select HDMI/DW input, this function is used. - After connecting RGB-PC or HDMI/DVt to PC input and checking the screen quality. * Adjustment for screen Resolution, -zPc IZSOUND SAP Position, Size, and Phase CO I \ 1 Position This function is to adjust picture to left/right and up/down as you prefer.
Operation 0 pe at ! o n r i, 8as ic ope rat!on " 1. First, connect power cord correctly. At this moment, the TV switches to standby mode. In standby mode to turn TV on, press the (.b/l, iNPUT, OH A / T button on the TV or press the POWER, TV iNPUT, iNPUT, OH A / T, Number (0 - 9) button on the remote control. 2. Select the viewing source by using TV INPUT, iNPUT button on the remote control. This TV is programmed to remember which power state it was last set to, even if the power cord is out. 3.
Operation On Screen M e n u s Se Ie c | io n a n d Adjustm:ent 1. Press the MENU button and then A / T button to select each menu. 2. Press the _ button and then use ,& / T / _1 / _ button to display the available menus.
Operation Setup Menu Options: - Automatically finds all channels available through antenna or cable inputs, and stores them in memory on the channel lisL - Run EZ Scan again after any Antenna/Cable connection changes. 1 Press the MENU button and then use ,&/_' button to select the SETUP menu. 2 Press the _ button and then use A / T button to select EZ Scan. 3 Press the ENTER button to begin the channel search. Allow EZ Scan to complete the channel search cycle for ANTENNA, and CABLE.
Operation * Custom - There are two different ways in order to add or delete scanned channels. One is "Custom List" and the other is "Favorite List" in the channel list. Both of them are available after _Z Scan on the SJ_TUP menu. - A Custom List can be created by toggling each channel on or off with ENTER button.
Operation Setup Menu Options continued - Shows how strong your DTV signal is and whether you need to adjust your antenna or digital cable input. The higher the signal strength, the less likely you are to experience picture degradatien. - DTV Signals. Only when the input signal is DTV or CADTV, this function is available. 1 Press the MENU button and then use A / _' button to select the Sg'TUPmenu.
Operation - Sets a label to each input source or lets you skip the input source which is not in use when you press INPUT button. 34 1 Press the MENU button and then use A /_' button to select the SETUP menu. 2 Press the 1_ button and then use A / T button to select Input :3 Press the I_ button and then use A / T button to select the source: AV1 2, Component1-2, RGB-PC, HDMI1/DVI or HDMI2. 4 Press the _1 / 1_ button to select the label.
Operation Video Menu Options: - EZ Picture adjusts the TV for the best picture appearance. Select the preset value in the EZ Picture menu based Press the EZ PIC button repeatedly to select the picture appearance setup option as shown below: on the program category. - Daylight, Normal, Night Time Daylight, Normal, Night Time, User I and User 2(your own setset- tings). tings are preset for optimum picture ,, You can also use the VIDEO menu to adjust Ez Picture.
Operation Manual Color Temperature Control T - You can also adjust the detailed set tings(Red, Green, Blue) by selecting the user menu. 36 1 Press the MENU button and then use A / T VIDEO menu. button to select the 2 Press the I_ button and then use A / T button to select Color Temperature. 3 Press the _ button and then use A / T button to select User. 4 Press the _,- button and then use A / T button to select Red, Green or B|ue.
Operation - XD is LG ElectroniCs unique picture improving technology to display a real HD source through an advanced dig-ital signal processing algorithm. - When selecting EZ Picture options (Daylight, Normal and Night time), XD is automatically change to Auto. - When selecting EZ Picture options (User 1 and User 2), you can choose the Auto / Manual and when selecting Manual, you can adjust the XD Contrast, XD color and XD Noise.
Operation o Cinema 3:2 Mode - Set up the TV for the best picture appearance for viewing movies. When you operate Cinema (3:2 PullDown Mode or Cinema Correction Mode),the TV will adjust 24 fps video from movies to 30 fps video for display (This function is only available in Analog, AVl, AV2, Component 480i mode.) • Black level - Adjusting the contrast and the brightness of the screen using the black level of the screen. This feature operates only in HDMI1/DVl, HDMI2 or AVl, AV2 mode.
Operation - Use to quickly reset all the Video menu options to their original factory preset values. 1 Press the MENLJbutton and then use A/T button to select the VIDEO menu. 2 Press the _ 3 Press the _ button to reset the Video menu options to original values. button and then use A / T button to select Video Reset.
Operation A udio Men u 0 pt ions - Otherlanguagesmaybeavailable if a digital signal is provided by the broadcasting station. 4O 1 Press the MENU button and then use A /T AUDIO menu. 2 Press the _ button and then use A / _' button to select Audio Language. 3 Press the _ button and then use A /'V button to select: English, Spanish, or French. 4 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Operation - EZ Sound lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. Press the EZ SOUND button repeatedly to select the appropriate sound setup as shown below : Normal, Stadium, News, Music, Theater and User (your own settings). , You can also adjust EZ Sound in the AUDIO - Normal, Stadium, News, Music and Theater are preset for good sound quality at the factory and are not adjustable. 2 menu.
Operation 6 SRS TruSurround Press EXiT button to return to TV viewing or press MENU button to return to the previous menu. XT Takes advantage of any multi-channel format without needing to add extra speakers or equipment. Dialog clarity, bass enrichment, and the addition of stereo audio enhancement produces an immersive sound experience from standard 42 stereo material.
Operation - Adjust the sound in your preference and surrounded environment. 1 Press the MENU button and then use A /_' button to select the AUDIO menu. 2 Press the _ button and then use A / T button to select Ba|ance. 3 Press the _ button and then use _ / _ button to make appropriate adjustments. 4 Press EXiT button to return to TV viewing or press MENU button to return to the previous menu. i_ -_ -Tum TV speakers off if using external audio equipment. Feature turns the TV Speakers option On or Off.
Operation Time Menu - If current time setting is wrong, reset the clock manually. - The current time will be set automatically from a digital channel signal provided by the broadcasting station. - Set the clock manually, if the current time is set incorrectly by the auto clock function. - The factory default value of the Auto Clock is Off, because a clock information sent each broadcasting station is different. 44 Opt ons i 1 Press the MENU button and then use A / _' button to select the TIIV_ menu.
Operation Timer function operates only if current time has been set. - Off-Timer function overrides OnTimer function if they are set both set to the same time. The TV must be in standby mode for the On-Timer to work. - If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV will automatically revert to standby mode. 1 Press the MENU button and then use A/_' button to select the TI_/J_ menu.
Operation Time Menu Options - If the TV is on and there is no input signal, the TV turns off automatically after 10 minutes. 46 continued 1 Press the MENU button and then use A / _' button to select the T[M]_ menu. 2 Press the _ button and then use A / T button to select Auto 3 Press the _ button and then use A / T button to select Off or On. 4 Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Operation Op|o i Me U Features Horizon Set by program Selects the proper picture proportion to match the source's The screen size is, more enlarged at both sides, to create image. a spectacular (4:3-_ 4:3) view. (16:9 --_ 16:9) Zoom 1 4:3 Choose Zoom 1 when you want to view the picture with- Choose 4:3 when you want to view a picture with an original out any alteration. However, the top and bottom portions 4:3 aspect ratio. of the picture will be cropped. i L ....................
Operation Option Menu * Analog Broadcasting Features System Captions - Select a caption mode for displaying captioning information if provided on a program. - Analog caption displays information at any position on the screen. - Text displays information, usually at the bottom position and is used for a data service. - Caption/Text, if provided by the broadcaster, would be available for both digital and analog channels on the Antenna/Cable.
Operation [/_-> Press the MENU button and then use A / 'V OPTION menu. - Customize the DTV/CADTV captions that appear on your screen. 2 Press the _ button and then use A/T 3 4 Press the _ button and then use _1 / _ button to select Custom. 5 - Low power reduces the power consumption of plasma display. button to select the button to select Caption Option. Use A / T button to customize the Style, Font, etc., to your preference.
Operation Option Menu; Features continued > - A frozen still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image ; even though the image is changed. Use our unique method to minimize any fixed image on the screen. 1 Press the MENU button and then use A / T OPTION menu. button to select the 2 Press the _ button and then use A /T button to select ISM Method.
Operation Loc k Me nu O p !o ns tm Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcasting station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. It is also possible to block all program viewing for a time period.
Operation - Set up blocking schemes to block specific channels, ratings, and external viewing sources. - A password is required to gain access to this menu if the Lock System is turned on. Press the MENU button and then use A/T button to select the LOCK menu. Then, press the _ button • If Lock is already set, enter the password as requested. • The TV is set up with the initial password "0-0-0-0". 2 Use the A / • button to choose from the following Lock Menu options.
Reference Ext:ernaI Co nt ro ! Dev ice Set up - Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the Monitor's functions externally. - Connect the serial port of the control device to the RS-232C jack on the TV back panel. - RS-232C connection cables are not supplied with the TV. PC No.
Reference - Use this function to specify a TV ID number. - Refer to 'Real Data Mapping'. See page 55. 1. Press the MENU button and then use A / _' button to select the SETUP menu. 2. Press the D,,button and then use A r_" button to select Set ID. 3. Press the I_, button and then use A r T button to adjust Set ID to choose the desired TV ID number. The adjustment range of Set is 1 ~ 99. 4. Press EXIT button to return to TV viewing or press MENU button to return to the previous menu.
Reference 01. Power (Command2:a) 05. Volume _1_To control Power On/Off of the TV. ][Set IU][ ][Uata][Cr] Data Transmission i 0 : Power Off [[k][e][ 1 : Power On Data Acknowledgement i[a][ ][Set IU][ ][OK][Uata][x] (Command2:e) You can also adjust mute using the MUTE button on remote control. Transmission i[k][a][ Mute To control volume mute on/off.
Reference 09. Color (Command2:i) 13. Remote I_ To adjust the screen color. You can also adjust color in the Video menu. Transmission i[k][i][ Data Lock Mode (Command2:m) To lock the remote control and the front panel controls on the set. Transmission ][Set ID][ ][Data][Cr] Min:0~Max:64 I Refer to 'Real data mapping'. See page 55. Acknowledgement i[i][ Control ][Set ID][ ][OK][Data][x] I i[k][m][ ][Set IU][ ][Uata][Cr] Data 0: Lock off Acknowledgement [[m][ ][Set IU][ ][OK][Data][x] 14.
Reference 20. Tune Command (Command: m a) To tune channel to following physical/major/minor number Transmission 18. ISM Method (Command2:p) I[m][a][][Set ID][ ][Data0][][Data1][][Data2][][Data3][][Data4][][DataS][Cr] To avoid having a fixed image remain on screen.
Reference 21. Channel Add/Del (Command: m b) II_ To add and delete the channels Transmission [[m][b][ ][Set ID][ ][Data][Cr] i Data 0: Channel Delete 1: Channel Add Acknowledgement u I[b][ ][Set IU][ ][OK][Data][x] I[b][ ][Set IU][ ][NG][Uata][x] [ 22. Key (Command: m c) II_ To send iR remote key code Transmission [[m][c][ Data ][Set ID][ ][Data][Cr] [ Key code: Refer to page 60. Acknowledgement [[c][ ][Set IU][ ][OK][Uata][x] 23.
Reference iR Codes Connect your wired remote control to the Remote Control port on the TV. _* Output waveform Single pulse, modulated with 37.917KHz signal at 455KHz Tc IH I Carrier frequency ___[___.__ FOAR=I/Tc= I_F_ Configuration T1 fOSC/12 Duty ratio = T1/Tc = 1/3 of frame o 1st frame I Lead Low custom code High custom code Data code I IL_ei_1_2_3_4_5_6_7i_1_2_3_4_5_6_7i°_D1_D2_°3_°_D5_D_°_i__i o Repeat frame __1 [__1-! _ Repeat code _ Tf Lead code __1 [ _ 9ma I .
Reference 0B OF 98 08 C4 C5 79 OE 10 ~ 19 4C 1A 09 02 03 O0 01 1E AA 39 40 41 07 06 44 43 52 4D 5B OA CB D6 5A DO BF D4 D5 CE CC 76 77 AF E1 E0 iJJJJJJJJJJJJJJJJJJJJJ_ 6O INPUT TV INPUT MULTIMEDIA POWER POWER ON POWER OFF RATIO TIMER Number Key 0~ 9 - (Dash) FLASHBK MUTE VOL _, VOLT CH _.
Reference P ro g r a m m ng t:h e Re m ot:e i The remote control is a multi-brand or universal remote control. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote control may not control all models of other brands. TV INPUT [.EZPIC Test your remote control.
Reference Programming Brand Codes Codes Brand Codes AIWA O34 KENWOOD 014 034 AKAI 047 048 AMPRO ANAM AUDIO DYNAMICS 016 043 046 124 125 146 O72 031 033 103 012 023 039 043 001 101 034 003 012 106 BROKSONIC CANON CAPEHART CRAIG CURTIS MATHES 035 028 108 003 031 037 031 129 033 040 033 135 041 MARANTZ 017 040 031 067 012 DAEWOO 005 065 112 108 012 007 010 064 108 110 111 116 117 119 MARTA MATSUI MEI MEMOREX 069 101 027 031 003 030 033 010 034 059 006 029 053 MGA MINOLTA 033
Reference Brand Codes Brand _,LPHASTAR DSR &MPLICA BIRDVIEW 123 050 051 126 129 133 GENERALINSTRUNENT003 031 134 004 059 3HANNELMASTER 013 036 008 054 050 014 055 009 015 HITACHI HOUSTONTRACKER 140 037 104 006 052 007 112 010 116 DXANTENNA ECHOSTAR 005 011 141 024 038 046 040 056 057 095 099 ELECTRO HOME EU ROPLUS 093 094 097 098 122 089 114 FUJITSU 017 022 Brand Codes &IWA Brand 016 101 029 039 051 HUGHES JANIEL 139 033 057 068 060 076 058 JERROLD KATHREIN LEGEND LG L
Reference Troubleshooting Check!st The operation The remote control doesn't work Power is suddenly turned off does not work normally, ,, Check to see if there is any object between the product and the remote control causing obstruction. ,,Are batteries installed with correct polarity (+ to +, - to -)? , Correct remote operating mode set: TV, VCR etc.? , Install new batteries. ,, Is the sleep timer set? ,, Check the power control settings.
Reference The Picture OK & No sound No output from one of the speakers Unusual sound from inside the product audio function does not work. ,, Press the VOL or VOLUME button. ,, Sound muted? Press MUTE button. ,, Try another channel. The problem may be with the broadcast. ,, Are the audio cables installed properly? ,, Adjust Balance in menu option.
Reference Specifications Dimensions with stand 60.8 x 40.8 x 16.0 inches (Width x Heightx Depth) 60PCl D (60PC1D-UE) 1544.0 x 1035.5 x 408.2 mm without stand 60.8 x 38.4 x 4.7 inches 1544.0x 977.0 x 119.2 mm Weight with stand without stand Dimensions with stand , 44.4 x 29.5x 15.0 inches (Width x Heightx Depth) 42PC3D (42PC3D-UE) 163 pounds / 74.0 kg 137.3 pounds / 62.26 kg 1129.0 x 748.5 x 380.0 mm without stand 44.4 x 27.4 x 4.1 inches 1129.0 x 695 x 103.
Reference Dimensions 32LC2D 32LC2DU (32LC2D-UE 32LC2DU-UE) with stand (Widthx Height x Depth) iiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiiii 31.9 x 24.8 x 9.3 inches 811 x 630 x 235 mm without stand 31.9 x 22.3 x 4.9 inches 811.0 x 566.8 x 123.5 mm Weight with stand without stand Dimensions with stand 40.8 pounds / 18.5 kg 37.2 x 28.7 x 11.3 inches 944 x 729 x 286 mm (Widthx Height x Depth) without stand 37LC2D (37LC2D-UE) 48.3 pounds / 21.9 kg 37.2 x26.0 x 5.1 inches 944.0 x 659.3 x 129.
