User guide

19
ENG
ENGLISH
MAKING CONNECTIONS
y
Use a High Speed HDMI™ Cable.
y
If you want to use HDMI-PC mode, you must set the input label to PC mode.
y
When HDMI PC is used, a compatiblity problem could occur.
NOTE
y
Connect the signal input cable and tighten it by turning the screws
clockwise.
y
Do not press the screen with your finger for a long time as this may result
in temporary distortion on the screen.
y
Avoid displaying a fixed image on the screen for a long period of time to
prevent image burn. Use a screensaver if possible.
CAUTION
y
Use the standard Macintosh adapter since an incompatible adapter is available in the
market. (Different signaling system)
y
Apple computers may require an adapter to connect to this monitor. Call or visit their
web site for more information.
NOTE
y
The monitor set with the HDMI connection for the best image quality.
y
To comply with the specifications of the product, use a shielded interface cable with ferrite core,
such as a D-sub 15-pin cable and DVI/HDMI cable.
y
If you turn the monitor set on when the set becomes cold, the screen may flicker. This is normal.
y
Some red, green, or blue spots may appear on the screen. This is normal.
y
To minimize the impact of electromagnetic waves, secure the cables with cable ties.
NOTE