ENGLISH PLASMA TV OWNER’S MANUAL PLASMA TV MODELS 4 2 P T 8* 5 0 P T 8* Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
ACCESSORIES IN PU T T INPU V T RAT IO SIM PIP MEN U DV R LIVE EX HO INDE VE PR MEN U X 1 ? TV EX IT PO HO 9 Q.V SIT PR 6 0 SIZ E TIM E MA FAV/ RK 3 8 P IEW ION INDE LD RE VE X ? AL Remote Control *Slightly wipe stained spot on the This feature is not available for all models. exterior only with the cleansing cloths for the product exterior if there is stain or fingerprint on surface of the exterior.
CONTENTS CONTENTS A C C E S S O R I E S .....................................................1 PREPARATION Home Menu......................................................................4 Front Panel Controls..................................................... 5 Back Panel Information ................................................ 6 Attaching the TV to a Wall ...........................................7 Back Cover for Wire Arrangement ............................ 8 Desktop Pedestal Installation ........
TIME SETTING Watching PIP(Picture-in-Picture) .............................73 Picture Size (Aspect Ratio)Control .........................75 Preset Picture Settings - Picture Mode-Preset............................................77 - Auto Colour Tone Control(Warm/Medium/Cool)78 Manual Picture Adjustment - Picture Mode-User option.................................79 - Colour Tone - User option................................80 - Picture Improvement Technology ...................81 Demo .....................
PREPARATION HOME MENU This menu is a contents guide. In Home Menu, you enter the Recorded list of DVR, Manual Recording of the DVR, Schedule List ,Photo List, Music List, Movie List or TV Menu. PREPARATION INPUT TV INPUT MODE TV POWER DVR Home DVD BRIGHT RATIO SIMPLINK VCR TEXT PIP PIP PR- PIP PR+ I/II SWAP PIP INPUT Free Space HIGH NORMAL Recorded TV LIST DVR LIVE TV G p.
FRONT PANEL CONTROLS A A This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. If your product has a protection film attached, remove the film and then wipe the product with a polishing cloth. PREPARATION Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on. • illuminates orange when the set is switched off during recording.
PREPARATION BACK PANEL INFORMATION A This is a simplified representation of the back panel. Here shown may be somewhat different from your TV. AV V IN 3 PREPARATION AV IN 3 S-Video Input S-VIDEO Connect S-Video out from an S-VIDEO device.
ATTACHING THE TV TO A WALL(This feature is not available for all models.) A A 1 PREPARATION Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people. It will also prevent the product from damage caused by fall.
PREPARATION BACK COVER FOR WIRE ARRANGEMENT PREPARATION 1 Hold the C A B L E M A N A G E M E N T with hands and push it as shown. CABLE MANAGEMENT 8 2 Connect the cables as necessary. To connect an additional equipment, see the External equipment Setup section. 3 Reinstall the C A B L E M A N A G E M E N T as shown.
A A The TV can be installed in various ways such as on a wall, or on a desktop etc. The TV is designed to be mounted horizontally. Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
PREPARATION A To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. AV IN 3 USB ANTENNA CONNECTION S-VIDEO For optimum picture quality, adjust antenna direction. A An antenna cable and converter are not supplied.
EXTERNAL EQUIPMENT SETUP A To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. A Here shown may be somewhat different from your TV. HD RECEIVER SETUP When connecting with a component cable AUDIO VIDEO VAR 1 COMPONENT IN EXTERNAL EQUIPMENT SETUP 2 Connect the video outputs (Y, PB, PR) of the digital set top box to the C O M P O N E N T I N V I D E O jacks on the set.
EXTERNAL EQUIPMENT SETUP When connecting with a HDMI cable HDMI/DVI IN EXTERNAL EQUIPMENT SETUP 1 1 2 2 Select HDMI1/DVI or HDMI2 input source with using the I N P U T button on the remote control. VIDEO AUDIO VA COMPONENT IN 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 1 HDMI-DTV OUTPUT 12 HDMI IN Connect the HDMI output of the digital set-top box to the H D M I / D V I I N 1 or H D M I I N 2 jack on the set.
When connecting with a HDMI to DVI cable RGB RGB IN IN HDMI IN 2 VIDEO AUDIO AUDIO AUDIO (RGB/DVI) (RGB/DVI) VARIABLE AUDIO OUT COMPONENT IN 1 2 1 Connect the DVI output of the digital set-top box to the H D M I / D V I I N 1 jack on the set. 2 Connect the audio output of the digital set-top box to the A U D I O ( R G B / D V I ) jack on the set. 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting with a component cable VIDEO AUDIO VA 1 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the set. EXTERNAL EQUIPMENT SETUP 2 Connect the audio outputs of the DVD to the C O M P ON E N T I N A U D I O jacks on the set. 3 Turn on the DVD player, insert a DVD. 4 Select Component input source with using the I N P U T button on the remote control.
When connecting with a Euro Scart Turn on the DVD player, insert a DVD. 3 Select AV1 input source with using the I N P U T button on the remote control. If connected to AV2 Euro scart socket, select AV2 input source. 4 Refer to the DVD player's manual for operating instructions.
EXTERNAL EQUIPMENT SETUP When connecting HDMI cable 1 EXTERNAL EQUIPMENT SETUP 2 3 Select HDMI1/DVI or HDMI2 input source with using the I N P U T button on the remote control. Refer to the DVD player's manual for operating instructions. HDMI/DVI IN G TV can receive the video and audio signal simultaneously with using a HDMI cable. If the DVD does not support Auto HDMI, you need to set the output resolution appropriately.
VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. n Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. USB IN n When connecting with an antenna ANT OUT S-VIDEO ANT IN OUTPUT SWITCH VIDEO L R 1 Wall Jack 2 Antenna 1 Connect the A N T O U T socket of the VCR to the A N T E N N A I N socket on the set.
EXTERNAL EQUIPMENT SETUP When connecting with a Euro Scart RGB IN 1 Connect the Euro scart socket of the VCR to the A V 1 Euro scart socket on the set. AUDIO OUT EXTERNAL EQUIPMENT SETUP 2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) ANTENNA IN AUDIO (RGB/DVI) RS-232C IN (CONTROL&SERVICE) GB C) 1 3 Select AV1 input source with using the I N P U T button on the remote control. If connected to A V 2 Euro scart socket, select AV2 input source.
VIDEO L V I D E O jacks between TV and Connect the A U D I O/V VCR. Match the jack colours (Video = yellow, Audio Left = white, and Audio Right = red) 2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 3 Select AV3 input source using the I N P U T button on the remote control. S-VIDEO 1 S-VIDEO ! NOTE G L VIDEO ANT IN R OUTPUT SWITCH ANT OUT If you have a mono VCR, connect the audio cable from the VCR to the A U D I O L / M O N O jack of the set.
EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder Video Game Set EXTERNAL EQUIPMENT SETUP AV IN 3 20 L R USB IN VIDEO VIDEO L/MONO AUDIO R S-VIDEO 1 1 V I D E O jacks between TV and external equipment. Match the jack colours. Connect the A U D I O/V (Video = yellow, Audio Left = white, and Audio Right = red) 2 Select AV3 input source with using the I N P U T button on the remote control. 3 Operate the corresponding external equipment. Refer to external equipment operating guide.
Use to connected either an external amplifier, or add a subwoofer to your surround sound system. AUDIO VARIABLE VARIABLE AUDIO AUDIO OUT OUT IN 2 Set up your speakers through your analog stereo amplifier, according to the instructions provided with the amplifier. ! NOTE G When connecting with external audio equipments, such as amplifiers or speakers, please turn the TV speakers off. (G p .
EXTERNAL EQUIPMENT SETUP USB IN SETUP AV IN 3 EXTERNAL EQUIPMENT SETUP USB IN 1 22 or VIDEO O L/MONO AUDIO R S-VIDEO 1 Connect the USB device to the U S B I N jacks on the side of TV. 2 After connecting the U S B I N jacks, you use the D V R function. (G p .
PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub 15 pin cable RGB RGB IN IN RGB RGB (PC) (PC) HDMI IN 2 VIDEO AUDIO VARIABLE AUDIO OUT COMPONENT IN 1 RGB OUTPUT ANTENNA IN 2 EXTERNAL EQUIPMENT SETUP 1 AUDIO AUDIO (RGB/DVI) (RGB/DVI) RS-232C IN (CONTROL&SERVICE) HDMI/DVI IN AUDIO 1 Connect the RGB output of the PC to the R G B ( P C) jack on the set.
EXTERNAL EQUIPMENT SETUP When connecting with a HDMI to DVI cable RGBRGB IN IN RGB (PC) HDMI IN AUDIO (RGB/DVI) ANTENNA IN 2 EXTERNAL EQUIPMENT SETUP AUDIO VIDEO VARIABLE AUDIO OUT COMPONENT IN 1 DVI-PC OUTPUT RS-232C IN (CONTROL&SERVICE) HDMI/DVI IN 1 2 AUDIO 1 Connect the DVI output of the PC to the H D M I / D V I I N 1 jack on the set. 2 Connect the PC audio output to the A U D I O ( R G B / D V I ) jack on the set. 3 Turn on the PC and the set.
Supported Display Resolution (RGB /HDMI[PC]mode) Horizontal Frequency(kHz) Vertical Frequency(Hz) 720x400 31.469 70.08 640x480 31.469 37.500 59.94 75.00 800x600 37.879 46.875 60.31 75.00 1024x768 48.363 56.476 60.023 60.00 70.06 75.02 1280x768 47.693 59.99 1360x768 47.700 60.00 1366x768 47.700 60.00 EXTERNAL EQUIPMENT SETUP Resolution ! NOTE G To enjoy vivid picture and sound, connect a PC to the set. G Avoid keeping a fixed image on the set’s screen for a long period of time.
EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode Auto Configure (RGB mode only) LIST Automatically adjusts picture position and minimizes image shaking.After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment. DVR LIVE TV EXIT MENU OK TIME SHIFT EXTERNAL EQUIPMENT SETUP VOL Auto configure FAV/ MARK TIME SHIFT PR MUTE This function is for the automatic adjustment of the screen position, clock, and phase.
Adjustment for screen Phase, Clock, Position LIST If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. DVR LIVE TV EXIT MENU OK TIME SHIFT TIME SHIFT To correct the screen size, adjust C l o c k. FAV/ MARK PR EXTERNAL EQUIPMENT SETUP VOL This function works in the following mode : RGB, COMPONENT (480p/576p/720p/1080i/1080p), HDMI (480p/576p/720p/1080i/1080p).
EXTERNAL EQUIPMENT SETUP Selecting Wide XGA mode LIST To see a normal picture, match the resolution of RGB mode and selection of XGA mode. DVR LIVE TV EXIT MENU OK TIME SHIFT TIME SHIFT This function works in the following mode: RGB mode. EXTERNAL EQUIPMENT SETUP VOL FAV/ MARK PR MUTE 1 2 3 SETUPO Picture Mode G Colour Temperature PICTURE AUDIOO 1 Press the M E N U button and then use D / select the PICTURE menu. 2 Press the G button and then use D / Screen.
Initializing (Reset to original factory settings) LIST DVR LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 Press the MENU button and then use D / select the PICTURE menu. E button to 1 2 3 4 5 6 SETUPO Picture Mode G Colour Temperature PICTURE AUDIOO Advanced Aspect Ratio OPTIONO Picture Reset DVRO Screen Demo TIMEO 2 Press the G button and then use D / E button to select EXTERNAL EQUIPMENT SETUP This function operates in current mode.
WATCHING TV / PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. INPUT TV INPUT POWER Switches the set on from standby or off to standby. MODE TV POWER TV INPUT Returns to the TV viewing from any mode. Switches the set on from standby. DVD BRIGHT RATIO SIMPLINK INPUT If you press the button once, the input source OSD will appear on screen as shown.
INPUT TV INPUT MODE Selects the remote operating modes. MODE TV POWER 3 DVD BRIGHT RATIO SIMPLINK TELETEXT These buttons are used for teletext. BUTTONS For further details, see the ‘Teletext’ section. VCR TEXT PIP PIP PR- PIP PR+ I/II 3 SWAP PIP INPUT SIMPLINK See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen.(G p . 4 4) I/II Selects the sound output.
WATCHING TV / PROGRAMME CONTROL TURNING ON THE TV INPUT TV INPUT POWER MODE TV DVD If your TV will be turned on, you will be able to use its features. BRIGHT RATIO SIMPLINK VCR TEXT PIP PIP PR- PIP PR+ 1 First, connect power cord correctly. At this moment, the TV switches to standby mode.
ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 Press the M E N U button and then D 2 Press the G button and then 3 Change the setting of an item in the sub or pull-down menu with F / G button. You can move to the higher level menu by pressing the O K or M E N U button. button to select a menu item. AUDIOO Advanced TIMEO Aspect Ratio OPTIONO Picture Reset DVRO Screen Demo DVRO Prev. Menu SETUP MENU Prev.
WATCHING TV / PROGRAMME CONTROL AUTO PROGRAMME TUNING Up to 100 TV stations can be stored by programme numbers (0 to 99). Once you have preset the stations, you will be able to use the PR + / or NUMBER buttons to scan the stations you have programmed. Stations can be tuned using automatic or manual modes. All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set.
MANUAL PROGRAMME TUNING Manual programme lets you manually tune and arrange the stations in whatever order you desire. LIST DVR LIVE TV EXIT MENU It’s not available to use this function in TimeShift Mode On mode. 1 Press the M E N U button and then D / SETUP menu. 2 Press the G button and then D / Tuning.
WATCHING TV / PROGRAMME CONTROL FINE TUNING Normally fine tuning is only necessary if reception is poor. LIST DVR LIVE TV EXIT MENU OK TIME SHIFT 1 Press the M E N U button and then D / the SETUP menu. E button to select VOL TIME SHIFT FAV/ MARK PR MUTE 6 WATCHING TV / PROGRAMME CONTROL 2 Press the G button and then D / Manual Tuning. E 3 Press the G button and then D / E 4 Press the F / and sound.
ASSIGNING A STATION NAME You can assign a station name with five characters to each programme number. LIST DVR LIVE TV EXIT MENU OK TIME SHIFT VOL 1 Press the M E N U button and then D / the SETUP menu. E PR MUTE button to select 1 2 3 4 5 6 7 8 9 SLEEP 0 Q.VIEW SIZE POSITION INDEX ? 3 Press the G button and then D / Name. E SETUP G Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit Favourite Prog.
WATCHING TV / PROGRAMME CONTROL BOOSTER In some models, B o o s t e r is an optional function. Only a set with B o o s t e r can perform this function. LIST LIVE TV DVR EXIT MENU If the reception is poor at the fringe area of TV signal, select B o o s t e r to O n. OK TIME SHIFT VOL TIME SHIFT FAV/ MARK PR MUTE WATCHING TV / PROGRAMME CONTROL 1 Press the M E N U button and then D / the SETUP menu.
PROGRAMME EDIT RATIO This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. SIMPLINK It’s not available to use this function on recording programme. 1 Press the M E N U button and then D / the SETUP menu. 2 Press the G button and then D / Programme Edit.
WATCHING TV / PROGRAMME CONTROL FAVOURITE PROGRAMME This function lets you select your favourite programmes directly. INPUT TV INPUT Repeatedly press the F A V button to select stored favourite programmes. RATIO MODE TV POWER DVD BRIGHT 1 Press the M E N U button and then D / SETUP menu.
CALLING THE PROGRAMME TABLE You can check the programmes stored in the memory by displaying the programme Table. LIST DVR LIVE TV EXIT MENU OK TIME SHIFT A Displaying programme Table TIME SHIFT FAV/ MARK VOL Press the L I S T button to display the Programme Table menu. PR MUTE The programme list appears on the screen. One programme list contains ten programmes as shown. 1 2 3 4 5 6 8 9 0 Q.VIEW SIZE POSITION INDEX ! NOTE a. You may find some blue programmes.
WATCHING TV / PROGRAMME CONTROL INPUT SOURCE SELECTION INPUT TV INPUT Sets a label to each input source which is not in use. MODE TV POWER DVD BRIGHT RATIO SIMPLINK VCR TEXT PIP SWAP PIP INPUT LIST LIVE TV DVR EXIT MENU TIME SHIFT WATCHING TV / PROGRAMME CONTROL 1 Press the M E N U button and then use D / to select the OPTION menu. E button 2 Press the G button and then use D / select Input Label.
KEY LOCK The TV can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing. LIST DVR OK TIME SHIFT This set is programmed to remember which option it was last set to even if you turn the set off. LIVE TV EXIT MENU VOL FAV/ MARK TIME SHIFT PR MUTE 1 E 3 5 6 button to select 2 Press the G button and then D / Lock. E button to select Key 3 Press the G button and then D / Off.
WATCHING TV / PROGRAMME CONTROL This operates only for the devices with the SIMPLINK logo. Please check the SIMPLINK logo. BRIGHT RATIO SIMPLINK This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. VCR SWAP PIP INPUT LIST LIVE TV DVR WATCHING TV / PROGRAMME CONTROL 2 Press the G button and then D / PLINK. E E 3 Press the G button and then D / Off. 4 Press the E X I T button to return to normal TV viewing.
SIMPLINK Functions Disc playback Control connected AV devices by pressing the D / E / F / G, O K buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip.(The button does not provide such functions) Direct Play After connecting AV devices to TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of AV devices connected to TV and play it.
DVR (DIGITAL VIDEO RECORDER) TIMESHIFT MODE(PAUSE & REPLAY OF LIVE TV) This function allows the unit to automatically record live TV and make it available for reviewing at any time. LIST DVR LIVE TV EXIT MENU With Timeshift turned on, you may pause and rewind normal TV viewing at any time without missing any of the live broadcast. OK TIME SHIFT VOL (TimeShift Mode and Recording functions might not work if the signal strength is weak.
Using the TimeShift Mode function LIVE 1 1 2 3 4 The ‘Progress Bar’? After selecting the TimeShift Mode On, press the O K button. This function indicates a possible DVR reshowing section ,a current on-screen and real live broad- ■ 2 casting position. 1 Status of current displayed video. 2 Current save time. 15 minute intervals from TimeShift Mode start 3 time. (Total - one hour). 4 Indicates current TimeShift Mode position.
DVR (DIGITAL VIDEO RECORDER) Using the TimeShift Mode function, play - When in timeshift mode, the following options are available. SIMPLINK TEXT PIP I/II PIP PR- PIP PR+ SWAP PIP INPUT LIST LIVE TV DELAYED DELAYED Indicates that the current broadcast and displayed video differ. ■ When pressing the O button delaying Timeshift, Timeshift is dumped. And delayed time is recording.
FORMAT HARD DISK Erases all programmes and initializes the hard disk. LIST DVR LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 2 3 4 5 6 SETUPO TimeShift Mode PICTURE O 2 OPTIONO Manual Record DVRG HDD Format Press the G button and then use D / E button to select HDD Format. DivX Reg. Code USB Backup USB HDD Format 3 Press the G button to start HDD Format. Menu Prev. Subtitle 1 ■ if you press the G button, this message is displayed.
DVR (DIGITAL VIDEO RECORDER) INSTANT RECORDING Use this function to record the programme you are watching on the main screen. Instant Record This function records the currently displayed programme. 1 Select the programme you wish to record and then press the O button. During recording is displayed. Use this feature to record up to 2 hours of programming. REC DVR (DIGITAL VIDEO RECORDER) 2 If you want to stop recording, press the A button.
The extra recording time added to existing setting equals the final recording time. DVR Recording Option Recording Time 00:00 00:00~02:00 After adjusting the recording time, select O K. The Status bar will be displayed. 4 Set Duration OK (0 Min Recorded) No Change Cancel Stop Record Total recording duration 3 REC Elapsed recording time Press the E X I T button to hide the Status bar. Press the O K button to display the Status bar.
DVR (DIGITAL VIDEO RECORDER) MANUAL RECORD SIMPLINK This function is easy to register to reserved recording. TEXT PIP I/II PIP PR- PIP PR+ SWAP PIP INPUT LIST LIVE TV DVR EXIT MENU LIST This function is available to use in DVR menu. When Manual Record, it’s stored the default sound of the set. DVR LIVE TV MENU TIME SHIFT OK EXIT TIME SHIFT TIME SHIFT OK TIME SHIFT FAV/ MARK VOL PR FAV/ MUTE DVR 1 Home DVR (DIGITAL VIDEO RECORDER) Press the D V R button to display H o m e menu.
SCHEDULE LIST LIST LIVE TV DVR EXIT MENU OK TIME SHIFT TIME SHIFT This function is used to show scheduled recordings. This function is available to use in DVR menu. DVR You can store up to 8 programmes. Home Free Space HIGH NORMAL Recorded TV Manual Record 1 Schedule List Press the D V R button to display H o m e menu. Use the D / E button to select the Schedule List and then use the O K or G button.
DVR (DIGITAL VIDEO RECORDER) TO USE THE USB DEVICE Precautions when using the USB device Only a USB storage device is recognizable. G If the USB storage device is connected through a USB hub, the device is not recognizable. G A USB storage device using an automatic recognition programme may not be recognized. G A USB storage device which uses its own driver may not be recognized. G In case of a card reader, up to four memory cards are concurrently recognizable.
To use the recorded list with USB storage device 1 Connect the USB device to the U S B I N jacks on the side of TV. ■ USB IN Only USB HDD that are over 40 GB and 1 partition can be used for USB Backup. S-VIDEO To use the USB storage device (over 40 GB) for USB Backup, execute the “USB HDD Format” VIDEO L/MONO AUDIO R 2 USB HDD (over 40 GB) ■ ■ SETUPO TimeShift Mode if you press the G button, this message is displayed.
DVR (DIGITAL VIDEO RECORDER) RECORDED TV PROGRAMME LIST LIST You can view the recorded programme list at a glance. This function is also available in DVR menu. EXIT OK TIME SHIFT 1 LIVE TV DVR MENU Press the D V R button to display H O M E menu. Use the D / E button to select Recorded TV and then use the O K or G button.
Recorded programme Selection and Popup Menu LIST LIVE TV DVR EXIT MENU The recorded programme stored in the internal HDD or the USB storage device can be played. OK OK TIME SHIFT TIME SHIFT The preview recorded list is shown above. VOL FAV/ MARK PR MUTE 1 Use the P R + / - button for page up/down navigation. 2 Use the M A R K button to delete from the list. A is displayed next to the preview window if an item is marked.
DVR (DIGITAL VIDEO RECORDER) When 'Yes’ is selected, the backup is cancelled and is converted back to input mode. If more than two files are transferred, the transferred file is stored, and the backup operations on the files in progress of transferring and scheduled for backup are cancelled. ■ When ‘No’ is selected, returns to the backup process screen. ■ While backup is being performed in the background, the status of the copy progress can be checked by pressing the ‘OK’ button.
USB BACKUP - When the Recorded List is stored exceeding the capacity of the internal HDD, the USB backup feature allows the backup of Recorded List of the internal HDD to the external HDD for backup connected through USB. - To use USB backup function, be sure to initialize the USB HDD using DVR menuUSB HDD format. OK - To use USB Backup, USB HDD is necessary more than 40 GB, 1 partition disk, and FAT32 system.
DVR (DIGITAL VIDEO RECORDER) G Copy to Recorded List :Restores the Recorded Programme to the internal HDD. USB backup is started. Copying to Recorded List (1/1) 75% Close ■ Stop if you press the A button, this message is displayed. Do you really want to cancel the backup? Yes No When 'Yes’ is selected, the backup is cancelled and is converted back to input mode.
Playing recorded programmes - You can play the selected programme in the recorded programme list. The ‘Progress Bar’? 1 Play a recorded programme. 2 While playing, You will see a playback screen as shown below. ■ To stop displaying the recorded programmes icon, press the EXIT button. PLAYING PLAYING 1 2 3 4 5 6 This function indicates a possible DVR reshowing section ,a current on-screen and real on-broadcasting position, a section of section-recording.
DVR (DIGITAL VIDEO RECORDER) PHOTO LIST LIST It’s available to playback the photo file(*.jpg) in the USB device. DVR The On Screen Display may be different from your set. Images are anOK example to assist with the TV operation. OK TIME SHIFT Supports up to four drives. VOL PHOTO(*.JPEG) supporting file FAV/ MARK MUTE Baseline: width<=4800, height is no limit • You can play JPEG files only. • Only baseline scan is supported among JPEG. • Non-supported files are displayed in the form of icon.
Photo Selection and PopUp Menu As shown, up to 6 thumbnail photos are listed per page. Photo List Page 2/3 No Marked USB Device Drive1 1 Use D / E / F / G buttons to select the target folder or drive then press O K . UP Folder Folder File 1. jpg File 4. jpg File 3. jpg Use the P R + / - button to navigation in the thumbnail photo page. 3 Use the M A R K button to mark or unmark a photo. When one or more photos are marked, you can view individual photos or a slide show of the marked photos.
DVR (DIGITAL VIDEO RECORDER) Set up the menu in Full-Sized Screen You can change the settings to display photos stored on a USB device, on a full-sized screen. Detailed operations are available on full-sized photo view screen. Photo List Page 2/3 No Marked USB Device Drive1 UP Folder Folder File 1. jpg File 4. jpg File 3. jpg 1 Use D / E / F / G buttons to select the target folder or drive then press O K .
G G Option : Set values for Slide Speed and Music folde r. Use F / G button to select Option and press O K button. ■ Use F / G button and O K button to set values. Then go to and press O K to save the settings. ■ You cannot change M u s i c F o l d e r while BGM is playing. 6 Use D / E / F / G button to select the previous or next photo. Use D / E / F / G button to select and control the menu on the full-sized screen. 7 Use E X I T button to go back to the photo list from the fullsized screen.
DVR (DIGITAL VIDEO RECORDER) MUSIC LIST Purchased music files(*.MP3) may contain copyright restrictions. Playback of these files may not be supported by this model. Music file on your USB device can be played by this unit. LIST DVR The On Screen Display may be different from your set. Images are an example to assist with the TV operation. OK LIVE TV EXIT MENU OK TIME SHIFT TIME SHIFT Supports up to four drives. DVR (DIGITAL VIDEO RECORDER) MUSIC(*.
Music Selection and PopUp Menu As shown , up to 8 music titles are listed per page. Music List Page 1/1 No Marked USB Device Drive1 1 Use D / E / F / G buttons to select the target folder or drive then press O K . 2 Use the P R + / - button to navigation in the music titles page.
DVR (DIGITAL VIDEO RECORDER) ■ If you don't press any button for a while during the playing, the play information box (as shown in the below) will float as a screen saver. ■ The ‘Screen Saver’? Screen saver is to prevent screen pixel damage due to an fixed image remaining on the screen for a extended period of time. ! NOTE DVR (DIGITAL VIDEO RECORDER) 68 When music is playing, is displayed in front of the music title. A damaged or corrupted music does not play but displays 00:00 in playtime.
MOVIE LIST LIST The movie list is activated once USB is detected. It is used when playing movie files on TV. OK Displays the movies in the USB folder and supports Play. Allows playback of all movies in the folder and user desired files. Editing such as delete and add is not allowed. It is a movie list that displays folder information and Divx file. Supports up to four drives.
DVR (DIGITAL VIDEO RECORDER) Movie Selection and PopUp Menu 1 Movie List Use D / E / F / G buttons to select the target folder or drive then press O K . Page 1/1 No Marked USB Device Drive1 UP Folder 2 Use the P R + / - button to navigation in the movie titles page. 3 Use M A R K button to mark or unmark a movie. When one or more movie files are marked, the marked movies will be played in sequence.
SUBTITLE Turns the subtitle control during movie play. LIST DVR LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 Press the M E N U button and then use D / E button to select the D V R menu. 2 Press the G button and then use D / E button to select Subtitle. SETUPO PICTURE O Press the G button to start Subtitle. 6 Record Quality Recorded TV TIMEO Schedule List DVR G 3 5 Manual Record HDD Format DivX Reg.
DVR (DIGITAL VIDEO RECORDER) DIVX REGISTRATION CODE Confirm the DivX registration code number of the TV. Using the registration number, movies can be rented or purchased at www.divx.com/vod. With a DivX registration code from other TV, playback of rented or purchased DivX file is not allowed. (Only DivX files matched with the registration code of the purchased TV are playable.) 1 2 3 LIST LIVE TV EXIT OK TIME SHIFT Press the M E N U button and then use D / E button to select the D V R menu.
PICTURE CONTROL WATCHING PIP(PICTURE-IN-PICTURE) It’s not available to use this function on recording programme. INPUT TV INPUT MODE TV POWER DVD PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image.
PICTURE CONTROL Input Source Selection for Sub Picture Press the P I P I N P U T button to select the input source for the sub picture. Each press of P I P I N P U T button is pressed, each input source for the sub picture is displayed. Sub Picture Size Adjustment (PIP mode only) PICTURE CONTROL Press the S I Z E button to adjust the sub picture size. With S I Z E button in PIP mode, sub picture is adjusted. Moving the Sub Picture (PIP mode only) Press the P O S I T I O N button.
PICTURE SIZE (ASPECT RATIO)CONTROL You can watch the screen in various picture formats; 1 6 : 9, O r i g i n a l, 4 : 3, 1 4 : 9 and Z o o m 1 / 2. INPUT TV INPUT MODE TV POWER DVD BRIGHT RATIO If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. You can adjust the enlarge proportion using D / E SIMPLINK VCR TEXT PIP I/II PIP PR- PIP PR+ SWAP PIP INPUT LIST LIVE TV button.
PICTURE CONTROL • Zoom1 Following selection will lead you to view the picture without any alternation, while filling the entire screen. However, the top and bottom portions of the picture will be cropped. Zoom1 • Zoom2 Choose Zoom2 when you want the picture to be altered, both horizontally extended and vertically cropped. The picture taking a halfway trade off between alteration and screen coverage. DE Zoom2 DE ! NOTE You can only select 1 6 : 9 (Wide), 4 : 3, Zoom 1/2 in Component, HDMI(DTV) mode.
PRESET PICTURE SETTINGS Picture Mode-Preset Dynamic Standard Mild User 1/2 Select this option to display with a sharp image. The most general and natural screen display status. Select this option to display with a mild image. Select this option to use the user-defined setting. LIST DVR LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE Press the M E N U button and then D / the PICTURE menu. 2 Press the G button and then D / Picture Mode.
PICTURE CONTROL Auto Colour Tone Control(Warm/Medium/Cool) To initialize values (reset to default settings), select the Cool option. LIST E OK VOL FAV/ MARK TIME SHIFT PR MUTE U s e r 1 / 2” of Picture It’s available to use this function in “U mode only. Press the M E N U button and then D / the PICTURE menu. LIVE TV EXIT TIME SHIFT Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue.
MANUAL PICTURE ADJUSTMENT Picture Mode-User option Contrast Brightness Colour Sharpness Tint Adjusts the difference between the light and dark levels in the picture. Increases or decreases amount of white in the your picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image. Adjusts the balance between red and green levels. Press the M E N U button and then D / the PICTURE menu.
PICTURE CONTROL Colour Tone - User option To adjust red, green, blue to any colour temperature you prefer. LIST DVR U s e r 1 / 2” of Picture It’s available to use this function in “U mode only. LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 Press the M E N U button and then D / the PICTURE menu.
- PICTURE IMPROVEMENT TECHNOLOGY XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. LIST It’s not available to use this function in RGB/HDMI-PC mode. 1 Press the MENU button and then D / the PICTURE menu. E Press the G button and then D / E button to select XD. 3 Press the G button and then D / Auto or Manual.
PICTURE CONTROL DEMO Use it to see the difference between XD Demo on and XD Demo off. LIST DVR LIVE TV EXIT MENU It’s not available to use this function in RGB/HDMI-PC mode. OK TIME SHIFT FAV/ MARK VOL TIME SHIFT PR MUTE 1 Press the MENU button and then D / the PICTURE menu.
ADVANCED - CINEMA Set up the TV for the best picture appearance for viewing movies. LIST LIVE TV DVR EXIT MENU This feature operates only in Analog TV, AV and Component 480i/576i mode. OK TIME SHIFT VOL TIME SHIFT FAV/ MARK PR MUTE 1 Press the M E N U button and then D / E Press the G button and then D / 2 3 4 5 6 SETUPO Picture Mode G Colour Temperature PICTURE button to select AUDIOO Advanced Aspect Ratio OPTIONO Picture Reset DVRO Screen Demo the PICTURE menu.
PICTURE CONTROL ADVANCED - BLACK(DARKNESS) LEVEL When you watch the movie, this function adjusts the set to the best picture appearance. Adjusting the contrast and the brightness of the screen using the black level of the screen. LIST LIVE TV DVR EXIT MENU This function works in the following mode: AV (NTSC-M) or HDMI. OK TIME SHIFT VOL TIME SHIFT FAV/ MARK PR MUTE 1 Press the M E N U button and then D / the PICTURE menu. 2 Press the G button and then D / Advanced.
PICTURE RESET Returns to the default settings Picture Mode, Colour Temperature, XD, Advanced, Aspect Ratio at the factory. LIST DVR LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 2 3 4 5 6 SETUPO Picture Mode G Colour Temperature PICTURE 1 Press the G button and then D / E E Advanced TIMEO Aspect Ratio OPTIONO Picture Reset DVRO Screen Demo button to select button to select Picture Reset. Menu Prev. 1 3 4 Press the G button to initialize the adjusted value.
PICTURE CONTROL IMAGE STICKING MINIMIZATION(ISM)METHOD A frozen of still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the set's screen for a long period of time. LIST DVR OK TIME SHIFT White wash White wash removes permanent images from the screen. Note: An excessive permanent image may be impossible to clear entirely with White Wash.
LOW-POWER PICTURE MODE This is the function to reduce the power consumption of the set. LIST DVR OK TIME SHIFT 1 Press the M E N U button and then D / select the OPTION menu. E 3 4 Press the G button and then D / Low Power. E Press the G button and then D / On or Off.
SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER Auto Volume automatically keeps on an equal volume level even if you change programmes. LIST DVR LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 2 3 Press the M E N U button and then D / the AUDIO menu. E 1 2 3 4 5 6 button to select Press the G button and then D / Volume. E button to select Auto Press the G button and then D / Off.
PRESET SOUND SETTINGS-SOUND MODE You can select your preferred sound setting; SRS TSXT, Standard, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer. LIST Sound Mode lets you enjoy the best sound without any Special adjustment because the TV sets the appropriate sound options based on the programme content. OK TIME SHIFT S R S T S X T, S t a n d a r d, M u s i c, M o v i e, and S p o r t s are preset for good sound quality at the factory and are not adjustable.
SOUND & LANGUAGE CONTROL SOUND SETTING ADJUSTMENT -USER MODE Adjust the sound equalizer. LIST DVR OK TIME SHIFT VOL 1 2 Press the M E N U button and then D / the AUDIO menu. Press the G button and then D / Sound Mode. E E LIVE TV EXIT MENU FAV/ MARK TIME SHIFT PR MUTE button to select button to select 1 2 3 4 5 6 SETUPO Sound Mode PICTUREO Auto Volume AUDIO G Balance TV Speaker TIMEO 0 OPTIONO DVRO 3 Press the G button and then D / 4 Press the G button.
BALANCE You can adjust the sound balance of speaker to the levels you prefer. LIST DVR LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 2 Press the M E N U button and then D / the AUDIO menu. Press the G button and then D / Balance. E E 2 3 4 5 6 SETUPO Sound Mode PICTUREO Auto Volume AUDIO G Balance TV Speaker TIMEO button to select- button to select 1 0 OPTIONO DVR Menu Prev. 1 Press the G button and then F / desired adjustment.
SOUND & LANGUAGE CONTROL TV SPEAKER ON/OFF SETUP You can adjust the internal speaker status. LIST In AV, COMPONENT, RGB and HDMI mode, internal speaker audio can be outputted even though there is no video signal. DVR OK TIME SHIFT If you want to use your external hi-fi stereo system, turn off the internal speakers of the set. LIVE TV EXIT MENU VOL FAV/ MARK TIME SHIFT PR MUTE 1 Press the M E N U button and then D / the AUDIO menu.
I/II Stereo/Dual Reception INPUT TV INPUT MODE TV POWER DVD BRIGHT RATIO When a programme is selected, the sound information for the station appears after the programme number and station name disappear. Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I / I I button twice. In mono reception, the depth of sound is improved.
SOUND & LANGUAGE CONTROL NICAM Reception If the set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button repeatedly. 1 When N I C A M m o n o is received, you can select N I C A M M O N O or F M M O N O. 2 When N I C A M stereo is received, you can select N I C A M S T E R E O or F M M O N O.
ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION Installation guide menu appears on TV screen when it is turned on for the first time. 1 Press the D / E / F / G button and then, O K button to select your desired language. 2 Press the country.
TIME SETTING CLOCK SETUP You must set the time correctly before using on/off time function. LIST DVR LIVE TV EXIT MENU If current time setting is erased by a power failure or the set is unplugged, reset the clock. OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 TIME SETTING 96 Press the M E N U button and then D / the TIME menu. 2 Press the G button and then D / Clock. E 3 Press the G button and then F / the year, date, or time option.
AUTO ON/OFF TIMER SETTING The Off Time automatically switches the set to standby at the preset time. LIST DVR LIVE TV EXIT MENU Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. OK TIME SHIFT Once the on time/off time is set, these functions operate daily at the preset time. 2 Press the G button and then D / On/Off Time.
TIME SETTING SLEEP TIMER SETTING You don’t have to remember to switch the set off before you go to sleep. The sleep timer automatically switches the set to standby after the preset time has elapsed. INPUT TV INPUT DVD BRIGHT RATIO SIMPLINK VCR TEXT PIP Press the S L E E P button repeatedly to select the number of minutes. The display ‘ - - -Min ’ will appear on the screen, followed by 10, 20, 30, 60, 90, 120, 180 and 240.
AUTO SHUT-OFF SETTING If set to on and there is no input signal, the TV turns off automatically after 10 minutes. LIST DVR LIVE TV EXIT MENU OK TIME SHIFT VOL FAV/ MARK TIME SHIFT PR MUTE 1 Press the M E N U button and then D / the TIME menu. 2 Press the G button and then D / Sleep. 3 3 5 6 SETUPO Clock PICTUREO Off Time AUDIOO On Time Sleep Time TIME G Auto Sleep OPTIONO button to select button to select Auto 2 4 DVRO Menu Prev. 11 E button to select On or Off.
TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
TOP TEXT The user guide displays four fields-red, green, yellow and blue at the bottom of the screen. The yellow field denotes the next group and the blue field indicates the next block. A Block / group / page selection 1 4 With the blue button you can progress from block to block. Use the yellow button to proceed to the next group with automatic overflow to the next block. With the green button you can proceed to the next existing page with automatic overflow to the next group.
TELETEXT SPECIAL TELETEXT FUNCTIONS ? A REVEAL Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display. A SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display. A UPDATE Displays the TV picture on the screen while waiting for the new teletext page.
APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. ■ Are batteries installed with correct polarity (+ to +, - to -)? ■ Correct remote operating mode set: TV, VCR etc.? ■ Install new batteries. ■ The remote control doesn’t work Power is suddenly turned off Is the sleep timer set? ■ Check the power control settings. Power interrupted ■ No broadcast on station tuned with Auto off activated.
APPENDIX The audio function does not work. Press the V O L ( o r V o l u m e ) button. ■ Sound muted? Press M U T E button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the product ■ Adjust Balance in menu option.
MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS MODELS Dimensions (Width x Height x Depth) Weight 42PT81-ZB 50PT81-ZB 1130.0 x 768.1 x 310.4 mm 44.5 x 30.2 x 12.2 inches 1308.0 x 906.1 x 370.0mm 51.5 x 35.7 x 14.6 inches without stand 1130.0 x 715.0 x 85.0 mm 44.5 x 28.1 x 3.3 inches 1308.0x 845 x 89.5 mm 51.5 x 33.2 x 3.5 inches with stand 31.05kg / 68.5 lbs 27.05kg / 59.6lbs 42.72kg / 94.2 lbs 38.02kg / 83.8lbs AC100-240V~ 50/60Hz 3.5A 330W AC100-240V~ 50/60Hz 4.
PROGRAMMING THE REMOTE CONTROL The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 Test your remote control.
APPENDIX VCR Brand AIWA AKAI APPENDIX 108 Codes 034 016 125 AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 BROKSONIC 035 CANON 028 CAPEHART 108 CRAIG 003 CURTIS MATHES 031 DAEWOO 005 065 112 DAYTRON 108 DBX 012 DYNATECH 034 ELECTROHOME 059 EMERSON 006 029 036 129 FISHER 003 FUNAI 034 GE 031 107 GO VIDEO 132 HARMAN KARDON HITACHI 004 043 INSTANTREPLAY 031 JCL 031 JCPENNY 012 040 JENSEN 043 JVC 012 048 130 KENWOOD 014 047 LG (GOLDSTAR) 001 101 LLOYD 034 LXI 003 017 MAGIN 040 Brand Codes Brand MAGNAVOX 031 06
DVD Brand Codes APEX DIGITAL 022 DENON 020 GE 005 HARMAN KARDON JVC 012 LG 001 MAGNAVOX 013 MARANTZ 024 014 006 027 010 016 025 Brand Codes Brand Codes MITSUBISHI NAD ONKYO PANASONIC PHILIPS PIONEER PROCEED PROSCAN 002 023 008 003 013 004 021 005 RCA SAMSUNG SONY THOMPSON TOSHIBA YAMAHA ZENITH 005 011 007 005 019 009 010 017 009 026 006 015 006 008 018 016 025 006 APPENDIX 109
APPENDIX IR CODES 1. How to Connect A Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes A Output waveform Single pulse, modulated with 37.
Code (Hexa) TV POWER INPUT RATIO BRIGHTNESS + BRIGHTNESS SIMPLINK PIP TEXT I/II PIP PR-(RED) PIP PR+(GREEN) SWAP(YELLOW) PIP INPUT(CYAN) DVR STOP(A) DVR PLAY(G) DVR PAUSE(II) DVR REC(O) IFF FF GG GGI MENU LIST DVR LIVE TV EXIT UP(D) DOWN(E) LEFT(F) RIGHT(G) OK( ) VOL + VOL PR + PR FAV/MARK MUTE Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number Key 7 Number Key 8 Number Key 9 Number Key 0 SLEEP Q.
APPENDIX EXTERNAL CONTROL DEVICE SETUP It’s not available to use this function in DVR mode. Connect the RS-232C input jack to an external control device (such as a computer or an A/V control system) and control the TV’s functions externally. Connect the serial port of the control device to the RS-232C jack on the TV back panel. RS-232C connection cables are not supplied with the TV.
RS-232C Configurations Please make sure the RS-232C configuration below. If you use different kind of RS-232C cable, system error may occur. 3-Wire Configurations RXD TXD GND DTR DSR RTS CTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 TXD RXD GND DTR DSR RTS CTS Set ID SETUPO Language PICTUREO Country AUDIOO Input Label SIMPLINK TIMEO Key Lock OPTION G ISM Method DVRO Low Power Set ID Use this function to specify a set ID number. Refer to ‘Real Data Mapping’1. See page p .
APPENDIX Communication Parameters Baud rate : 9600 bps (UART) A Data length : 8 bits A Parity : None Stop bit : 1 bit A Communication code : ASCII code A Use a crossed (reverse) cable. A A Command Reference List Transmission / Receiving Protocol COMMAND COMMAND DATA 1 2 (Hexadecimal) APPENDIX 01. Power 02. Aspect Ratio 03. Screen Mute 04. Volume Mute 05. Volume Control 06. Contrast 07. Brightness 08. Colour 09. Tint 10. Sharpness 11. OSD Select 12. Remote control lock mode 13. PIP/DW 14.
01. Power (Command 2 : a) 05. Volume Control (Command 2 : f) G To control Power On/Off of the set. G To adjust volume. Transmission You can also adjust volume with the VOLUME buttons on remote control. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Ack 1 : Power On [k][f][ ][Set ID][ ][Data][Cr] G To show Power On/Off. Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 117.
APPENDIX 10. Sharpness (Command 2 : k) G To adjust the screen sharpness. You can also adjust sharpness in the PICTURE menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 117. Ack 14. PIP Position (Command2:q) G To select sub picture position for PIP. You can also adjust the sub picture position using POSI-TION button on the remote control or in the PIP/DW menu.
19. Blue Adjustment (Command 2 : $) G To adjust blue in colour temperature. 22. ISM Method (Command 1 : j, Command 2 : p) Transmission G To control the ISM method. You can also adjust ISM [k][$][ ][Set ID][ ][Data][Cr] Method in OPTION menu. Data Min : 0 ~ Max : 50 * Refer to ‘Real data mapping 2’. See page 117. Ack Transmission [$][ ][Set ID][ ][OK][Data][x] Data 0: Normal 1: White wash 20 . Tune Command/Channel Tuning (Command1:m, Command2:a) G To select a programme for the main picture.
APPENDIX 25. K e y (Command1:m, Command2:c) 27. PIP Input select (Command1:x, Command2:y) G To send IR remote key code. G To adjust input source for sub picture in PIP mode Transmission Transmission [m][c][ ][Set ID][ ][Data][Cr] [x][y][ ][Set ID][ ][Data][Cr] Data Key code - Refer to page 111.
