SAC30033607_en 1/24/07 6:38 PM Page 1 ENGLISH LCD TV PLASMA TV OWNER’S MANUAL LCD TV MODELS 2 6 L C 4 D* 2 6 L C 7 D* 3 2 L C 4 D* 3 2 L C 7 D* 3 7 L C 4 D* 3 7 L C 7 D* 4 2 L C 4 D* 4 2 L C 7 D* PLASMA TV MODELS 4 2 P C 5 D* 5 0 P C 5 D* 5 0 P B 3 D* Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
SAC30033607_en 1/24/07 6:38 PM Page 2
SAC30033607_en 1/24/07 6:38 PM Page 1 ACCESSORIES Ensure that the following accessories are included with your TV. If an accessory is missing, please contact the dealer where you purchased the product. Owner’s Manual Power Cord Polishing Cloth (except 26/32LC4D*) Polish the screen with the cloth.
SAC30033607_en 1/24/07 6:38 PM Page 2 CONTENTS ACCESSORIES ............................................. 1 CONTENTS PREPARATION Front Panel Controls . . . . . . . . . . . . . . . . . . . . . . . . 4 Back Panel Information . . . . . . . . . . . . . . . . . . . . . . 6 Stand installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8 Attaching the TV to a wall . . . . . . . . . . . . . . . . . . . . . 9 Back Cover for Wire Arrangement . . . . . . . . . . . . .
SAC30033607_en 1/24/07 6:38 PM Page 3 SOUND & LANGUAGE CONTROL Teletext within Digital Service . . . . . . . . . . . . . . . 86 Teletext in Digital Service . . . . . . . . . . . . . . . . . . 86 APPENDIX CONTENTS Auto Volume Leveler . . . . . . . . . . . . . . . . . . . . . . . . 68 Preset Sound Settings - Sound Mode . . . . . . . . . . 69 Sound Setting Adjustment - User Mode . . . . . . . . . . 70 Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
SAC30033607_en 1/24/07 6:38 PM Page 4 PREPARATION FRONT PANEL CONTROLS A This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. Plasma TV Models: 42/50PC5D* PREPARATION Remote Control Sensor INPUT INPUT MENU OK INPUT Button Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on.
SAC30033607_en 1/24/07 6:38 PM Page 5 PREPARATION LCD TV Models PR PROGRAMME Buttons VOL VOLUME Buttons OK OK Button MENU MENU Button INPUT INPUT Button R /I Remote Control Sensor POWER Button Power/Standby Indicator • illuminates red in standby mode. • illuminates green when the set is switched on.
SAC30033607_en 1/24/07 6:38 PM Page 6 PREPARATION BACK PANEL INFORMATION AV IN 3 This is a simplified representation of the back panel. Here shown may be somewhat different from your TV.
SAC30033607_en 1/24/07 6:38 PM Page 7 LCD TV Models S-VIDEO Audio/Video Input Connect audio/video output from an external device to these jacks. VIDEO L/MONO AUDIO R S-VIDEO AV IN 3 AV IN 3 1 HDMI IN AC-IN 1 2 AV 1 DMI IN AV 1 AV 2 EJECT 3 AV 1 HDMI IN AV 2 RGB IN ANTENNA 2 HDMI/DVI ININ1 1 AV 3 AV IN 3 2 PCMCIA RGB IN CARD SLOT VIDEO L/MONO AUDIO R VIDEO L/MONO AUDIO R VIDEO L/MONO AUDIO R S-VIDEO PREPARATION S-Video Input S-VIDEO Connect S-Video out from an SVIDEO device.
SAC30033607_en 1/24/07 6:38 PM Page 8 PREPARATION STAND INSTALLATION (Only 26, 32, 37 inch LCD TV Models) Carefully place the product screen side down on a cushioned surface that will protect product and screen from damage. 2 Assemble the product stand with the product as shown. 3 Install the 4 bolts securely, in the back of the product in the holes provided.
SAC30033607_en 1/24/07 6:38 PM Page 9 ATTACHING THE TV TO A WALL A A Plasma TV models LCD TV models 1 1 2 PREPARATION Set it up close to the wall so the product doesn’t fall over when it is pushed backwards. The instructions shown below is a safer way to set up the product, which is to fix it on the wall so the product doesn’t fall over when it is pulled in the forward direction. It will prevent the product from falling for-ward and hurting people.
SAC30033607_en 1/24/07 6:38 PM Page 10 PREPARATION BACK COVER FOR WIRE ARRANGEMENT Plasma TV models PREPARATION 1 Hold the C A B L E M A N A G E M E N T with hands and push it as shown. CABLE MANAGEMENT 2 Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section. 3 10 Reinstall the C A B L E M A N A G E M E N T as shown.
SAC30033607_en 1/24/07 6:38 PM Page 11 LCD TV models PREPARATION 1 Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section. 2 Install the C A B L E M A N A G E M E N T as shown. CABLE MANAGEMENT 3 Bundle the cables using the supplied twister holder. How to remove the cable management Hold the C A B L E M A N A G E M E N T with both hands and pull it upward.
SAC30033607_en 1/24/07 6:38 PM Page 12 PREPARATION ■ ■ The set can be installed in various ways such as on a wall, or on a desktop etc. The set is designed to be mounted horizontally. GROUNDING PREPARATION Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
SAC30033607_en ■ 1/24/07 6:38 PM Page 13 To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied.
SAC30033607_en 1/24/07 6:38 PM Page 14 EXTERNAL EQUIPMENT SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ■ This part of EXTERNAL EQUIPMENT SETUP mainly use pictures for the LCD TV models. HD RECEIVER SETUP ■ This TV can receive Digital Over-the-air/Cable signals without an external digital set-top box.
SAC30033607_en 1/24/07 6:38 PM CARD SLOT Page 15 HDMI/DVI IN 1 AV 1 HDMI IN 2 ANTENNA IN VIDEO AUDIO RGB IN AV 1 RS-232C IN When connecting with a HDMI cable 1 2 Connect the digital set-top box to H D M I / D V I I N 1or H D M I I N 2 jack on the set. EJECT HDMI/DVI IN 1 ANTENNA IN OPTICAL Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
SAC30033607_en 1/24/07 6:38 PM Page 16 EXTERNAL EQUIPMENT SETUP DVD SETUP When connecting with a component cable 1 Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the set. Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the set. 3 Turn on the DVD player, insert a DVD. 1 4 Select COMPONENT input source with using the I N P U T button on the remote control.
N1 Page 17 HDMI/DVI IN 1 AV 1 HDMI IN 2 AV 2 ANTENNA IN VIDEO AUDIO RS-232C IN When connecting with a Euro Scart PCMCIA CARD SLOT EJECT 1 1 HDMI IN 2A V 1 Connect the Euro scart socketHDMI/DVI of theINDVD to the Euro scart socket on the set. 2 Turn on the DVD player,ANTENNA insert a DVD. 3 Select AV1 input source with using the I N P U T button on the remote control. RS-232C IN If connected to AV2 Euro scart socket, select AV2 input source.
1/24/07 6:38 PM S-VIDEO AV 2 EXTERNAL EQUIPMENT SETUP AUDIO VIDEO AV IN 3 When connecting HDMI cable 1 VI IN 1 HDMI IN 2 2 EXTERNAL EQUIPMENT SETUP RS-232C IN VIDEO 3 Connect the HDMI output of the DVD to the H D M I / D V I I N 1 orAVH1D M IAVI N2 2 jack on the set. PCMCIA CARD SLOT EJECT HDMI/DVI IN 1 Select HDMI1or HDMI2 input source with using the I N P U T button on the remote control. AUDIO Refer to the DVD player's manual for operating instructions.
SAC30033607_en 1/24/07 6:38 PM Page 19 VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of PCMCIA EJECT SLOT the screen may CARD remain visible on the screen.
SAC30033607_en 1/24/07 6:38 PM RS-232C IN Page 20 EXTERNAL EQUIPMENT SETUP When connecting with a Euro Scart PCMCIA CARD SLOT HDMI/DVI IN 1 1 HDMI IN 2 EJECT HDMI/DVI IN 1 HDMI IN 2 Connect the Euro scart socket of the VCR to the A V 1 Euro scart AV socket on2the set. 1 AV AUDIO IN (RGB/DVI) AV 1 AV 2 MPONENT IN ANTENNA IN VCR into the 2 Insert a video tape and press PLAY on VIDEO the VCR. (Refer to the VCR owner’s manual.
SAC30033607_en VI IN 1 1/24/07 6:38 PM AV 1 HDMI IN 2 Page 21 AV 2 When connecting with an S-Video cable S-VIDEO Connect the S-VIDEO output of the VCR to the S V I D E O input on the set. The picture quality is improved; compared to normal composite (RCA cable) input. VIDEO L ANT IN R AUDIO 1 RS-232C IN Connect the audio outputs of the VCR to the A U D I O input jacks on the set. 3 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.
SAC30033607_en 1/24/07 6:38 PM Page 22 EXTERNAL EQUIPMENT SETUP OTHER A/V SOURCE SETUP Camcorder Video Game Set EXTERNAL EQUIPMENT SETUP 22 VIDEO L R VIDEO L/MONO AUDIO R S-VIDEO 1 AV IN 3 1 V I D E O jacks between TV and external equipment. Match the jack colors. Connect the A U D I O/V (Video = yellow, Audio Left = white, and Audio Right = red) 2 Select AV3 input source with using the I N P U T button on the remote control. 3 Operate the corresponding external equipment.
SAC30033607_en 1/24/07 6:38 PM Page 23 PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub 15 pin cable PCMCIA CARD SLOT Connect the RGB output of the PC to the R G B ( P C) jack on the set. ANTENNA RS-232C IN 2 1 4 Select RGB input source with using the I N P U T button on the remote control. AV 2 AUDIO VIDEO AUDIO VIDEO RS-232C IN SERVICE) Turn on the PC and the set.
SAC30033607_en 1/24/07 6:38 PM Page 24 ! NOTE G To EXTERNAL EQUIPMENT SETUP 24 enjoy vivid picture and sound, connect a PC to the set. G Avoid keeping a fixed image on the set’s screen for a long period of time. The fixed image may become permanently imprinted on the screen; use a screen saver when possible. G Connect PC to the RGB (PC) or HDMI IN (or HDMI/DVI IN) port of the set; change the resolution output of PC accordingly.
SAC30033607_en 1/24/07 6:38 PM Page 25 Supported Display Resolution RGB[PC] / HDMI[PC] mode Resolution 720x400 640x480 832x624 1024x768 1280x768 1360x768 1366x768 1920x1080 31.468 31.469 37.684 37.879 46.875 49.725 48.363 56.476 60.123 47.78 47.72 47.56 66.647 70.08 59.94 75.00 60.31 75.00 74.55 60.00 70.00 75.029 59.87 59.8 59.6 59.988 Resolution 640x480 720x480 720x576 1280x720 1920x1080 Horizontal Vertical Frequency(KHz) Frequency(Hz) 31.469 31.469 31.47 31.50 31.25 37.50 44.96 45.00 33.72 33.
SAC30033607_en 1/24/07 6:38 PM Page 26 EXTERNAL EQUIPMENT SETUP Screen Setup for PC mode BACK Auto Configure (RGB [PC] mode only) MENU INFO i EXIT Automatically adjusts picture position and minimizes image shaking.After adjustment, if the image is still not correct, your set is functioning properly but needs further adjustment. GUIDE OK FAV EXTERNAL EQUIPMENT SETUP VOL PR Auto configure This function is for the automatic adjustment of the screen position, clock, and phase.
SAC30033607_en 1/24/07 6:38 PM Page 27 BACK Adjustment for screen Phase, Clock, Position MENU INFO i EXIT If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. GUIDE OK To correct the screen size, adjust C l o c k. FAV PR This function works in the following mode : RGB[PC]. C l o c k This function is to minimize any vertical bars or stripes visible on the screen background.
SAC30033607_en 1/24/07 6:38 PM Page 28 EXTERNAL EQUIPMENT SETUP Selecting Wide XGA mode BACK MENU INFO i EXIT To see a normal picture, match the resolution of RGB mode and selection of XGA mode. GUIDE OK This function works in the following mode: RGB[PC] mode FAV VOL EXTERNAL EQUIPMENT SETUP 1 Press the MENU button and then use D or E button to select the SCREEN menu. 2 Press the G button and then use D or E button to select XGA Mode.
SAC30033607_en 1/24/07 6:38 PM Page 29 Initializing (Reset to original factory settings) BACK MENU INFO i EXIT This function operates in current mode. To initialize the adjusted value GUIDE OK It’s not available to use ISM Method and Low power in L C D T V models. FAV VOL 2 Press the G button and then Factory Mode. D or E button to select 3 Press the G button and then Factory Reset. D or E button to select 4 D or E Move MENU Prev. 1 Press the G button.
SAC30033607_en 1/24/07 6:38 PM Page 30 WATCHING TV /PROGRAMME CONTROL REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. INPUT D/A MODE TV POWER TV/RADIO INPUT DVD POWER Switches the set on from standby or off to standby. D/A INPUT Selects digital or analogue mode. Switches the set on from standby. BRIGHT VCR SIMPLINK TEXT RATIO TV/RADIO Selects Radio or TV channel in digital mode.
SAC30033607_en 1/24/07 6:38 PM INPUT D/A MODE Selects the remote operating modes. MODE TV POWER TV/RADIO INPUT Page 31 See a list of AV devices connected to TV. When you toggle this button, the Simplink menu appears at the screen. (G p.50) DVD BRIGHT VCR SIMPLINK TEXT RATIO I/II TELETEXT These buttons are used for teletext. BUTTONS For further details, see the ‘Teletext’ section. 1 1 RATIO Selects your desired picture format.
SAC30033607_en 1/24/07 6:38 PM Page 32 WATCHING TV /PROGRAMME CONTROL TURNING ON THE TV - If your TV will be turned on, you will be able to use its features. INPUT D/A 1 First, connect power cord correctly. At this moment, the TV switches to standby mode.
SAC30033607_en 1/24/07 6:38 PM Page 33 PROGRAMME SELECTION 1 Press the P R + or - or NUMBER buttons to select a programme number. INPUT D/A MODE TV POWER TV/RADIO INPUT DVD BRIGHT VCR SIMPLINK TEXT BACK MENU EXIT I/II INFO i GUIDE OK 1 Press the VOL + or - button to adjust the volume. If you want to switch the sound off, press the MUTE button. You can cancel this function by pressing the MUTE, VOL + or - , or I/II button. FAV VOL PR MUTE 1 2 3 4 5 6 7 8 9 LIST 0 Q.
SAC30033607_en 1/24/07 6:38 PM Page 34 WATCHING TV /PROGRAMME CONTROL ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 Press the M E N U button and then D or E button to display each menu. 2 Press the G button and then D or E button to select a menu item. 3 Change the setting of an item in the sub or pull-down menu with F or G button. You can move to the higher level menu by pressing the O K or M E N U button.
SAC30033607_en 1/24/07 6:38 PM Page 35 AUTO PROGRAMME TUNING (IN DIGITAL MODE) BACK INFO i MENU EXIT GUIDE Use it to automatically find and store all of the programmes. OK When you start auto programming in digital mode, all the stored service information will be deleted. FAV VOL Press the MENU button and then D or E button to select the SETUP menu. 2 Press the G button and then D or E button to select Auto Tuning.
SAC30033607_en 1/24/07 6:38 PM Page 36 WATCHING TV /PROGRAMME CONTROL MANUAL PROGRAMME TUNING (IN DIGITAL MODE) BACK MENU INFO i EXIT Manual Tuning lets you manually add a programme to your programme list. GUIDE OK FAV VOL WATCHING TV / PROGRAMME CONTROL 1 Press the MENU button and then D or E button to select the SETUP menu. 2 Press the G button and then D or E button to select Manual Tuning.
SAC30033607_en 1/24/07 6:38 PM Page 37 BACK MENU INFO i EXIT PROGRAMME EDIT (IN DIGITAL MODE) GUIDE OK When a programme number is skipped, it means that you will be unable to select it using PR + or - button during TV viewing. FAV VOL If you want to select the skipped programme, directly enter the programme number with the NUMBER buttons or select it in the Programme edit menu. PR MUTE 2 3 This function enables you to skip the stored programmes.
SAC30033607_en 1/24/07 6:38 PM Page 38 WATCHING TV /PROGRAMME CONTROL Mini Glossary Displayed when the DTV Programme. Displayed when the Teletext Programme. Displayed when the Favourite Programme. Displayed when the Subtitle Programme. Displayed when the Locked Programme. Displayed when the Scramble Programme. Displayed when the Radio Programme. Displayed when the Dolby Programme. Displayed when the MHEG Programme.
SAC30033607_en 1/24/07 6:38 PM Page 39 5V ANTENNA POWER (IN DIGITAL MODE ONLY) BACK MENU EXIT Even if there isn’t a special 5V adapter power in the external antenna, this function can output 5V in the set. INFO i GUIDE OK FAV VOL Press the MENU button and then D or E button to select the SETUP menu. 2 Press the G button and then use D or E button to select 5V Antenna Power.
SAC30033607_en 1/24/07 6:38 PM Page 40 WATCHING TV /PROGRAMME CONTROL SOFTWARE UPDATE (IN DIGITAL MODE ONLY) BACK Software Update means software can be downloaded through the digital terrestrial broadcasting system. WATCHING TV / PROGRAMME CONTROL 1 Press the MENU button and then select the SETUP menu. 2 Press the G button and then D or E button to select Software update. 3 Press the G button and then D or E button to select Off or On.
SAC30033607_en 1/24/07 6:38 PM Page 41 DIAGNOSTICS (IN DIGITAL MODE ONLY) BACK MENU GUIDE This function enables you to watch Manufacturer, Model/Type, Serial Number and Software Version. OK It’s displayed the information and signal strength of the tuned MUX. It’s displayed the signal information and service name of the selected MUX. Press the M E N U button and then D or E button to select the SETUP menu. 2 Press the G button and then use D or E button to select Diagnostics.
SAC30033607_en 1/24/07 6:38 PM Page 42 WATCHING TV /PROGRAMME CONTROL CI [COMMON INTERFACE] INFORMATION (IN DIGITAL MODE ONLY) BACK MENU INFO i EXIT This function enables you to watch some scrambled services (pay services). If you remove the CI Module, you can’t watch the pay services. When the module is inserted to CI slot, you can access the module menu. To purchase a module and smart card, contact your supplying dealer. Do not often insert or remove a CAM module from the set.
SAC30033607_en 1/24/07 6:38 PM Page 43 BACK MENU INFO i EXIT AUTO PROGRAMME TUNING (IN ANALOGUE MODE) GUIDE OK All stations that can be received are stored by this method. It is recommended that you use Auto tuning during installation of this set. FAV VOL PR MUTE 2 Press the G button and then D or E button to select Auto Tuning. 3 Press the G button to select System. Select a TV system with the F or G button; 2 3 4 5 6 7 8 9 LIST 0 Q.
SAC30033607_en 1/24/07 6:38 PM Page 44 WATCHING TV /PROGRAMME CONTROL BACK MENU INFO i EXIT MANUAL PROGRAMME TUNING (IN ANALOGUE MODE) GUIDE OK Manual Tuning lets you manually tune and arrange the stations in whatever order you desire. FAV VOL PR MUTE WATCHING TV / PROGRAMME CONTROL 1 Press the MENU button and then D or E button to select the SETUP menu. 2 Press the G button and then D or E button to select Manual Tuning. 3 Press the G button to select Storage.
SAC30033607_en 1/24/07 6:38 PM Page 45 FINE TUNING (IN ANALOGUE MODE) BACK Normally fine tuning is only necessary if reception is poor. MENU INFO i EXIT GUIDE OK 1 Press the MENU button and then D or E button to select the SETUP menu. FAV VOL Press the G button and then D or E button to select Manual Tuning. 3 Press the G button and then D or E button to select Fine. 4 Press the G button and then F or G button to fine tune for the best picture and sound.
SAC30033607_en 1/24/07 6:38 PM Page 46 WATCHING TV /PROGRAMME CONTROL PROGRAMME EDIT (IN ANALOGUE MODE) BACK This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. WATCHING TV / PROGRAMME CONTROL 1 MENU INFO i EXIT GUIDE OK SETUPO Auto Tuning PICTUREO Manual Tuning AUDIOO Programme Edit Press the MENU button and then D or E button to select the SETUP menu.
SAC30033607_en 1/24/07 6:38 PM Page 47 FAV VOL PR MUTE BACK MENU INFO i EXIT OK A 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW GUIDE Moving a programme Select a programme to be moved with D or E or F or G button. b Press the YELLOW button. c Move the programme to the desired programme number with the D or E or F or G button. d Press the YELLOW button again to release this function. A Skipping a programme number a Select a programme number to be skipped with D or E or F or G button.
SAC30033607_en 1/24/07 6:38 PM Page 48 WATCHING TV /PROGRAMME CONTROL EXIT GUIDE CALLING THE PROGRAMME TABLE OK You can check the programmes stored in the memory by displaying the programme table. FAV VOL PR MUTE A 1 2 3 4 5 6 7 8 9 LIST 0 Q.VIEW Displaying programme LIST WATCHING TV / PROGRAMME CONTROL 1 Press the LIST button to display the PROGRAMME LIST menu. DTV List D 801 YLE TV1 The programme list appears on the screen.
SAC30033607_en 1/24/07 6:38 PM Page 49 INPUT SOURCE SELECTION BACK MENU INFO i EXIT Sets a label to each input source which is not in use. GUIDE OK FAV VOL Press the M E N U button and then use D or E button to select the OPTION menu. 2 Press the G button and then use D or E button to select Input Label. SETUPO Language PICTUREO Country AUDIOO Lock System Parental Control TIMEO Input Label OPTIONO SIMPLINK SCREENO Factory Mode Move MENU Prev.
SAC30033607_en 1/24/07 6:38 PM Page 50 WATCHING TV /PROGRAMME CONTROL FUNCTION BACK MENU INFO i EXIT GUIDE This operates only for the devices with the SIMPLINK logo. Please check the SIMPLINK logo. OK This allows you to control and play other AV devices connected to the display through HDMI cable without additional cables and settings. FAV VOL PR If you do not want SIMPLINK menu, select “Off”. WATCHING TV / PROGRAMME CONTROL 1 Press the MENU button and then select the OPTION menu.
SAC30033607_en 1/24/07 6:38 PM Page 51 SIMPLINK Functions Disc playback Control connected AV devices by pressing the D or E or F or G, OK buttons and buttons for play, stop, pause, fast reverse, fast forward, chapter skip.(The button does not provide such functions) Direct Play After connecting AV devices to TV, you can directly control the devices and play media without additional settings. Select AV device Enables you to select one of AV devices connected to TV and play it.
SAC30033607_en 1/24/07 6:38 PM Page 52 PICTURE CONTROL EPG (ELECTRONIC PROGRAMME GUIDE) (IN DIGITAL MODE) This system has an Electronic Programme Guide (EPG) to help your navigation through all the possible viewing options. The EPG supplies information such as programme listings, start and end times for all available services.
SAC30033607_en 1/24/07 6:38 PM Page 53 Button Function in NOW/NEXT Guide Mode Remote Control Buttons RED YELLOW BLUE F or G D or E PR + or GUIDE/EXIT TV/RADIO INFO i Function Change EPG mode Enter Timer Record/Remind setting mode Enter Timer Record/Remind list mode Change to the selected channel Select NOW or NEXT Programme Select the Broadcasting Programme Page Up/Down Switch off EPG Select TV or RADIO Programme The detail information on or off Button Function in 8 Days Guide Mode F or G D or E PR
SAC30033607_en 1/24/07 6:38 PM Page 54 PICTURE CONTROL Button Function in Extended Description Box Remote Control Buttons D or E YELLOW INFO i GUIDE/EXIT Function Text Up/Down Enter Timer Record/Remind setting mode The detail information on or off Switch off EPG PICTURE CONTROL Button Function in Record/Remind Setting Mode - This function is available only when recording equipment that use pin8 recording signalling has been connected to the DTV-OUT terminal, using a SCART cable.
SAC30033607_en 1/24/07 6:38 PM Page 55 PICTURE SIZE (ASPECT RATIO) CONTROL BACK MENU EXIT You can watch the screen in various picture formats; S p e c t a c l e, F u l l, O r i g i n a l, 4 : 3, 1 6 : 9, 1 4 : 9 and Z o o m 1 / 2. INFO i GUIDE OK If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. FAV There might be uncomfortable in full mode. Then change into other mode.
SAC30033607_en 1/24/07 6:38 PM Page 56 PICTURE CONTROL • 16:9 Following selection will lead you to adjust the picture horizontally, in a linear proportion, to fill the entire screen (useful for viewing 4:3 formatted DVDs). • Zoom1 Following selection will lead you to view the picture without any alternation, while filling the entire screen. However, the top and bottom portions of the picture will be cropped.
SAC30033607_en 1/24/07 6:38 PM Page 57 PRESET PICTURE SETTINGS BACK MENU INFO i EXIT GUIDE Picture Mode-Preset OK Dynamic Standard Mild User 1/2 FAV VOL SETUPO Picture Mode PICTUREO Colour Temperature Press the MENU button and then D or E button to select the PICTURE menu. AUDIOO TIMEO OPTIONO 2 Press the G button and then D or E button to select Picture Mode. 3 Press the G button and then D or E button to select Dynamic, Standard, Mild, User 1, or User 2.
SAC30033607_en 1/24/07 6:38 PM Page 58 PICTURE CONTROL Auto Colour Tone Control (Warm/Medium/Cool) BACK To initialize values (reset to default settings), select the Cool option. MENU INFO i EXIT GUIDE OK Choose one of three automatic colour adjustments. Set to warm to enhance hotter colours such as red, or set to cool to see less intense colours with more blue. FAV It’s available to use this function in User mode.
SAC30033607_en 1/24/07 6:38 PM Page 59 MANUAL PICTURE ADJUSTMENT BACK MENU INFO i EXIT Picture Mode-User option GUIDE OK Contrast Brightness Colour Sharpness Tint Adjusts the difference between the light and dark levels in the picture. Increases or decreases amount of white in the your picture. Adjusts intensity of all colours. Adjusts the level of crispness in the edges between the light and dark areas of the picture. The lower the level, the softer the image.
SAC30033607_en 1/24/07 6:38 PM Page 60 PICTURE CONTROL Colour Tone - User option BACK MENU INFO i EXIT To adjust red, green, blue to any colour temperature you prefer. GUIDE OK FAV VOL PR SETUPO Picture Mode PICTUREO Colour Temperature AUDIOO PICTURE CONTROL 1 Press the M E N U button and then D or E button to select the PICTURE menu. 2 Press the G button and then D or E button to select Colour Temperature. Advanced Picture Reset OPTIONO Demo SCREENO TIMEO Move MENU Prev.
SAC30033607_en 1/24/07 6:38 PM Page 61 XD - PICTURE IMPROVEMENT TECHNOLOGY BACK XD is LG electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. MENU INFO i EXIT GUIDE OK It’s not available to use this function in RGB-PC mode. FAV 1 Press the MENU button and then D or E button to select the PICTURE menu. 2 Press the G button and then D or E button to select XD.
SAC30033607_en 1/24/07 6:38 PM Page 62 PICTURE CONTROL DEMO BACK MENU INFO i EXIT GUIDE Use it to see the difference between XD Demo on and XD Demo off. OK It’s not available to use this function in RGB[PC], HDMI[PC] mode. FAV VOL 1 PICTURE CONTROL 2 PR SETUPO Picture Mode PICTUREO Colour Temperature Press the MENU button and then D or E button to select the PICTURE menu.
SAC30033607_en 1/24/07 6:38 PM Page 63 ADVANCED - CINEMA BACK MENU INFO i EXIT Set up the TV for the best picture appearance for viewing movies. GUIDE OK This feature operates only in TV, AV, S-Video and Component 480i/576i mode. FAV VOL PR SETUPO Picture Mode PICTUREO Colour Temperature 1 Press the M E N U button and then D or E button to select AUDIOO TIMEO the PICTURE menu. OPTIONO Advanced Picture Reset Demo SCREENO Press the G button and then D or E button to select Advanced.
SAC30033607_en 1/24/07 6:38 PM Page 64 PICTURE CONTROL ADVANCED - BLACK(DARKNESS) LEVEL BACK MENU INFO i EXIT GUIDE When you watch the movie, this function adjusts the set to the best picture appearance. Adjusting the contrast and the brightness of the screen using the black level of the screen. OK This function works in the following mode: AV (NTSC-M), SVideo (NTSC-M) or HDMI.
SAC30033607_en 1/24/07 6:38 PM Page 65 PICTURE RESET BACK MENU INFO i EXIT GUIDE Returns to the default settings Picture Mode, Colour Temperature, XD, Advanced at the factory. OK FAV VOL 1 SETUPO Picture Mode PICTUREO Colour Temperature Press the M E N U button and then D or E button to select the PICTURE menu. AUDIOO Advanced Picture Reset OPTIONO Demo SCREENO TIMEO Press the G button and then D or E button to select Picture Reset. Move MENU Prev.
SAC30033607_en 1/24/07 6:38 PM Page 66 PICTURE CONTROL IMAGE STICKING MINIMIZATION (ISM) METHOD BACK MENU INFO i EXIT A frozen of still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the set's screen for a long period of time. GUIDE OK FAV VOL PR It’s not available to use this function in LCD models.
SAC30033607_en 1/24/07 6:38 PM Page 67 LOW-POWER PICTURE MODE BACK MENU INFO i EXIT This is the function to reduce the power consumption of the set. GUIDE OK It’s not available to use this function in LCD TV models. FAV VOL Press the MENU button and then select the OPTION menu. 2 Press the G button and then D or E button to select Factory Mode. 3 Press the G button and then D or E button to select Low power.
SAC30033607_en 1/24/07 6:38 PM Page 68 SOUND & LANGUAGE CONTROL AUTO VOLUME LEVELER BACK MENU EXIT AVL automatically keeps on an equal volume level even if you change programmes. INFO i GUIDE OK FAV VOL SOUND & LANGUAGE CONTROL 68 1 Press the MENU button and then select the AUDIO menu. 2 Press the G button and then D or E button to select Auto Volume. 3 Press the G button and then D or E button to select Off or On.
SAC30033607_en 1/24/07 6:38 PM Page 69 PRESET SOUND SETTINGS-SOUND MODE BACK MENU EXIT You can select your preferred sound setting; Surround MAX, Standard, Music, Movie or Sports and you can also adjust the sound frequency of the equalizer. FAV VOL S u r r o u n d M A X, S t a n d a r d, M u s i c, M o v i e, and S p o r t s are preset for good sound quality at the factory and are not adjustable. 2 Press the G button and then D or Sound Mode.
SAC30033607_en 1/24/07 6:38 PM Page 70 SOUND &LANGUAGE CONTROL SOUND SETTING ADJUSTMENT -USER MODE BACK MENU EXIT Adjust the sound equalizer. INFO i GUIDE OK FAV VOL 1 Press the M E N U button and then D or the AUDIO menu. E button to select 2 Press the G button and then D or Sound Mode. E button to select 3 Press the G button and then D or E button to select User. 4 Press the G button.
SAC30033607_en 1/24/07 6:38 PM Page 71 BALANCE BACK MENU EXIT You can adjust the sound balance of speaker to the levels you prefer. INFO i GUIDE OK FAV VOL Press the MENU button and then select the AUDIO menu. 2 Press the G button and then Balance. D or E button to select 3 Press the G button and then desired adjustment.
SAC30033607_en 1/24/07 6:38 PM Page 72 SOUND &LANGUAGE CONTROL TV SPEAKERS ON/ OFF SETUP BACK MENU EXIT You can adjust the internal speaker status. INFO i GUIDE OK In AV1, AV2, AV3, COMPONENT, RGB and HDMI1 with HDMI to DVI cable, TV speaker and/or variable audio can be outputted even though there is no video signal. FAV VOL PR If you want to use your external hi-fi stereo system, turn off the internal speakers of the set.
SAC30033607_en 1/24/07 6:38 PM Page 73 SELECTING DIGITAL AUDIO OUT BACK MENU INFO i EXIT This function lets you select your preferred Digital Audio Output. The set can output Dolby Digital in a channel only which broadcast Dolby Digital Audio. When it’s applied the Dolby Digital format, if you select Dolby Digital on Digital audio out menu, SPDIF Output will be outputted Dolby Digital.
SAC30033607_en 1/24/07 6:38 PM Page 74 SOUND &LANGUAGE CONTROL I/II Stereo/Dual Reception (In Analogue Mode Only) When a programme is selected, the sound information for the station appears after the programme number and station name disappear. SOUND & LANGUAGE CONTROL 74 Broadcast On Screen Display Mono MONO Stereo STEREO Dual DUAL I A Mono sound selection If the stereo signal is weak in stereo reception, you can switch to mono by pressing the I / I I button twice.
SAC30033607_en 1/24/07 6:38 PM Page 75 NICAM Reception (In Analogue Mode Only) If the set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I/II button repeatedly. When N I C A M m o n o is received, you can select N I C A M M O N O or F M M O N O.
SAC30033607_en 1/24/07 6:38 PM Page 76 SOUND &LANGUAGE CONTROL ON-SCREEN MENU LANGUAGE / COUNTRY SELECTION Installation guide menu appears on TV screen when it is turned on for the first time. Press the D or E or F or G button and then, O K button to select your desired language. 1 2 INPUT D/A MODE TV POWER TV/RADIO INPUT DVD BRIGHT VCR SIMPLINK TEXT BACK RATIO MENU EXIT Press the D or E button and then, O K button to select your country.
SAC30033607_en 1/24/07 6:38 PM Page 77 SIMPLINK TEXT RATIO I/II LANGUAGE SELECTION (IN DIGITAL MODE ONLY) A u d i o function lets you select your preferred language for audio. If the audio data in selected language is not broadcasted, default language audio will be played. BACK 3 Press the G button and then use D or E button to select A u d i o, S u b t i t l e or S u b t i t l e H a r d o f h e a r i n g. 4 Press the G button and then use F or G button to select your desired language.
SAC30033607_en 1/24/07 6:38 PM Page 78 TIME SETTING CLOCK SETUP BACK MENU INFO i EXIT The clock is set automatically when receiving the digital signal. (You can set the clock if the TV has no DTV signal.) You must set to the time correctly before using on/off time function. GUIDE OK FAV VOL 1 Press the MENU button and then select the TIME menu. 2 Press the G button and then D or E button to select Clock.
SAC30033607_en 1/24/07 6:38 PM Page 79 AUTO ON/OFF TIMER SETTING BACK The Off time automatically switches the set to standby at the preset time. Two hours after the set is switched on by the on time function it will automatically switch back to standby mode unless a button has been pressed. Once the on time/off time is set, these functions operate daily at the preset time. Off time function overrides On timer function if they are set both to the same time.
SAC30033607_en 1/24/07 6:38 PM Page 80 TIME SETTING AUTO SHUT-OFF SETTING BACK MENU EXIT If set to on and there is no input signal, the set turns off automatically after 10 minutes. INFO i GUIDE OK FAV VOL 1 Press the MENU button and then select the TIME menu. 2 Press the G button and then D or E button to select Auto sleep. 3 Press the G button and then D or E button to select Off or On. 4 Press the EXIT button to return to normal TV viewing.
SAC30033607_en 1/24/07 6:38 PM Page 81 TIME ZONE SETUP BACK When you select a Time Zone city, TV time is set by the time offset information based on Time Zone and GMT (Greenwich Mean Time) information which is received to broadcasting signal when time is set automatically by a digital signal. 1 2 Press the MENU button and then select the TIME menu. D or E D 3 Press the G button and then your viewing area time zone. F 4 Press the EXIT button to return to normal TV viewing.
SAC30033607_en 1/24/07 6:38 PM Page 82 PARENTAL CONTROL / RATINGS BACK MENU INFO i EXIT GUIDE SET PASSWORD & LOCK SYSTEM OK If you first enter the password, press ‘0’, ‘0’, ‘0’, ‘0’ on the remote control handset. FAV VOL PR MUTE PARENTAL CONTROL / RATING 82 1 Press the MENU button and then select the OPTION menu. 2 Press the G button and then D or E button to select Lock System. 3 Press the G button and then F or G button to select On. D or E 1 2 3 4 5 6 7 8 9 LIST 0 Q.
SAC30033607_en 1/24/07 6:38 PM Page 83 PARENTAL CONTROL INPUT D/A POWER TV/RADIO INPUT MODE TV FAV DVD VOL PR BRIGHT VCR MUTE This function operates according to information from the broadcasting station. Therefore if the signal has wrong information, this function dose not operates. Lets you set up blocking schemes to block specific channels, ratings, and external viewing sources. BACK MENU EXIT 1 2 3 4 5 6 7 8 9 LIST 0 Q.
SAC30033607_en 1/24/07 6:38 PM Page 84 TELETEXT This feature is not available in all countries. Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. The teletext decoder of this TV can support the SIMPLE, TOP and FASTEXT systems. SIMPLE (standard teletext) consists of a number of pages which are selected by directly entering the corresponding page number.
SAC30033607_en 1/24/07 6:38 PM Page 85 FASTEXT The teletext pages are colour coded along the bottom of the screen and are selected by pressing the corresponding coloured button. A Page selection 1 2 3 4 Press the i button to select the index page. You can select the pages which are colour coded along the bottom line with the same coloured buttons. Corresponding to the SIMPLE teletext mode, you can select a page by entering its three digit page number with the NUMBER buttons in FASTEXT mode.
SAC30033607_en 1/24/07 6:38 PM Page 86 DIGITAL TELETEXT *This function works in UK only. The set gives you access to a digital teletext which is greatly improved in various aspects such as text, graphics and so on. This digital teletext can be accessed by special digital teletext services and specific services which broadcast digital teletext. You should select off from the subtitle language to display teletext by pressing SUBTITLE button.
SAC30033607_en 1/24/07 6:38 PM Page 87 APPENDIX TROUBLESHOOTING The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. A Ensure that the batteries are installed with correct polarity (+ to +, - to -). A Ensure that the correct remote operating mode is set: TV, VCR etc. A Install new batteries.
SAC30033607_en 1/24/07 6:38 PM Page 88 APPENDIX The audio function does not work. A Picture OK & No sound A A A No output from one of the speakers Unusual sound from inside the product Press the VOL + or - button. Sound muted? Press MUTE button. Try another channel. The problem may be with the broadcast. Are the audio cables installed properly? A Adjust Balance in menu option.
SAC30033607_en 1/24/07 6:38 PM Page 89 MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you can enjoy your new TV. Caution: Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent.
SAC30033607_en 1/24/07 6:38 PM Page 90 APPENDIX PRODUCT SPECIFICATIONS 26LC4D* / 32LC4D* / 37LC4D* / 42LC4D* 26LC7D* / 32LC7D* / 37LC7D* / 42LC7D* MODELS 2 6 L C 4 D* 26LC4D-ZA 2 6 L C 7 D* 26LC7D-ZA Weight 3 2 L C 4 D* 37LC4D-ZA 3 2 L C 7 D* Weight 37LC4D-ZA 3 7 L C 7 D* Weight 42LC4D-ZA APPENDIX 4 2 L C 7 D* without stand 676.4 x 474.5 x 85.0 mm 26.7 x 18.7 x 3.4 inches with stand without stand 10.04 kg / 22.2 lbs 9.02 kg / 19.9 lbs with stand 801.0 x 607.5 x 254.0 mm 31.6 x 24.
SAC30033607_en 1/24/07 6:38 PM Page 91 MODELS 4 2 P C 5 D* 42PC5D-ZB 42PC5D1-ZD 5 0 P C 5 D* Dimensions (Width x Height x Depth) Weight 5 0 P B 3 D* 50PB3D-ZA with stand 1048.0 x 766.0 x 310.0 mm 41.3 x 30.2 x 12.3 inches without stand 1048.0 x 713.0 x 83.5 mm 41.3 x 28.1 x 3.3 inches with stand without stand 28.0 kg / 61.8 lbs 24.6 kg / 54.3 lbs with stand 1242.0 x 887.6 x 370.0 mm 48.9 x 35.0 x 14.6 inches without stand 1242.0 x 827.2 x 88.0 mm 48.9 x 32.6 x 3.
SAC30033607_en 1/24/07 6:38 PM Page 92 APPENDIX PROGRAMMING THE REMOTE CONTROL The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 Test your remote control.
SAC30033607_en 1/24/07 6:38 PM Page 93 VCR Brand AIWA AKAI Codes Codes Brand MAGNAVOX 031 067 012 069 101 027 031 003 033 101 045 013 013 049 151 034 024 012 048 043 053 066 133 SAMSUNG 043 046 124 146 MARANTZ 033 023 037 031 103 039 043 129 033 MARTA MATSUI MEI MEMOREX 040 033 007 108 116 135 041 010 064 110 111 117 119 MGA MINOLTA MITSUBISHI 023 039 043 053 017 031 037 131 008 025 034 046 138 009 033 109 136 012 018 063 033 033 013 066 063 072 144 147 031 050 150 034 048 012 106 027
SAC30033607_en 1/24/07 6:38 PM Page 94 APPENDIX IR CODES 1. How to Connect A Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes A Output waveform Single pulse, modulated with 37.
SAC30033607_en 1/24/07 6:38 PM Page 95 Code (Hexa) PR + PR VOL + VOL Up (D) Down (E) Right (G) Left (F) POWER MUTE Number Key 0 Number Key 1 Number Key 2 Number Key 3 Number Key 4 Number Key 5 Number Key 6 Number Key 7 Number Key 8 Number Key 9 INPUT INFO i GUIDE SUBTITLE EXIT FAV Q.
SAC30033607_en 1/24/07 6:38 PM Page 96 APPENDIX EXTERNAL CONTROL DEVICE SETUP RS-232C Setup Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product.
SAC30033607_en 1/24/07 6:38 PM Page 97 Set ID BACK Press the M E N U button and then use D or E button to select the OPTION menu. 2 Press the G button and then use D or E button to select Factory Mode. INFO i GUIDE OK Use this function to specify a set ID number. Refer to ‘Real Data Mapping’. G p .101 1 MENU EXIT SETUPO Language PICTUREO Country AUDIOO Lock System Parental Control TIMEO Input Label OPTIONO SIMPLINK SCREENO Factory Mode Move MENU Prev.
SAC30033607_en 1/24/07 6:38 PM Page 98 APPENDIX Communication Parameters Baud rate : 9600 bps (UART) Data length : 8 bits A Parity : None Stop bit : 1 bit Communication code : ASCII code A Use a crossed (reverse) cable. A A A A Command Reference List Transmission / Receiving Protocol COMMAND COMMAND DATA 1 2 (Hexadecimal) APPENDIX 01. Power 02. Input Select 03. Aspect Ratio 04. Screen Mute 05. Volume Mute 06. Volume Control 07. Contrast 08. Brightness 09. Colour 10. Tint 11. Sharpness 12.
SAC30033607_en 1/24/07 6:38 PM Page 99 01. Power (Command 2 : a) 04. Screen Mute (Command 2 : d) G To control Power On/Off of the set. G To select screen mute on/off. Transmission Transmission [k][a][ ][Set ID][ ][Data][Cr] [k][d][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Ack 1 : Power On Data 0 : Screen mute off (Picture on) 1 : Screen mute on (Picture off) [a][ ][Set ID][ ][OK][Data][x] Ack G To show Power On/Off. [d][ ][Set ID][ ][OK][Data][x] Transmission 05.
SAC30033607_en 1/24/07 6:38 PM Page 100 APPENDIX 09. Colour (Command 2 : i) 14. Balance (Command 2 : t) G To adjust the screen colour. G To adjust balance. You can also adjust colour in the PICTURE menu. Transmission You can also adjust balance in the AUDIO menu. Transmission [k][i][ ][Set ID][ ][Data][Cr] [k][t][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 101. Ack Data Min : 0 ~ Max : 64 * Refer to ‘Real data mapping 1’. See page 101.
SAC30033607_en 1/24/07 6:38 PM Page 101 19. Abnormal State (Command 2 : z) G To recognize an abnormal state. 21. Low Power (Command 1 : j, Command 2 : q) G To reduce the power consumption of the set. You can Transmission also adjust Low Power in OPTION menu. It’s not available to use this function in LCD TV models.
SAC30033607_en 1/24/07 6:38 PM Page 102 APPENDIX 24. Auto Configure (Command 1 : j, Command 2 : u) G To adjust picture position and minimize image shaking automatically. It works only in RGB (PC) mode. Transmission [j][u][ ][Set ID][ ][Data][Cr] Data 1: To set Ack [u][ ][Set ID][ ][OK/NG][Data][x] 27. Input select (Command 1 : x, Command 2 : b) (Main Picture Input) G To select input source for main picture. Transmission [x][b][ ][Set ID][ ][Data][Cr] Data Structure MSB 0 25.
SAC30033607_en 1/24/07 6:38 PM Page 103
SAC30033607_en 1/24/07 6:38 PM Page 104
SAC30033607_en 1/24/07 6:38 PM Page 105
SAC30033607_en 1/24/07 6:38 PM Page 106
