User guide

CONNECTIONS & SETUP
18
CONNECTIONS & SETUP
4. When connecting with an S-Video cable
VIDEO AUDIO
( )
VIDEO
AUDIO
COMPONENT IN
S-VIDEO
AV IN 3
VARIABLE
AUDIO OUT
S-VIDEO
OUT
IN
(R) AUDIO (L) VIDEO
34
OUTPUT
SWITCH
ANT OUT
ANT IN
ANTENNA
IN
ANTENNA
OUT
VIDEO AUDIO
MONO
( )
VIDEO
AUDIO
COMPONENT IN
S-VIDEO
AV IN 3
VARIABLE
AUDIO OUT
VCR
Connect the S-VIDEO output of the VCR to
the S-VIDEO input on the set. The picture
quality is improved; compared to normal com-
posite (RCA cable) input.
Connect the audio outputs of the VCR to the
AUDIO input jacks on the set.
Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner’s
manual.)
Select AV3 input source with using the INPUT
button on the remote control.
3. When connecting with a Euro Scart
(R) AUDIO (L)
AUDIO/
VIDEO
AV 1 AV 2 DTV OUT
VCR
Back panel of the set
Connect the Euro scart socket of the VCR to
the AV1 Euro scart socket on the set.
Insert a video tape into the VCR and press
PLAY on the VCR. (Refer to the VCR owner’s
manual.)
Select AV1 input source with using the INPUT
button on the remote control.
- If connected to AV2 Euro scart socket, select
AV2 input source.
1
2
3
1
2
3
4
NOTE
!
GG
If the S-VIDEO(Y/C) signal is received through the Euro scart socket 2 (AV2), you must change to the
SAV2 mode.
GG
If you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable.
NOTE
!
GG
If both S-VIDEO and VIDEO sockets have been connected to the S-VHS VCR simultaneously, only the S-
VIDEO can be received.
Back panel of the set
1
12