User guide

52
ENG
ENGLISH
EXTERNAL CONTROL DEVICE SETUP
20. Tile Mode (Command: d d)
ChangeaTileMode.
Transmission
[d][d][][SetID][][Data][Cr]
Data Description
00or11 Tilemodeisoff.
12 1x2mode(columnxrow)
13 1x3mode
14 1x4mode
...
...
55 1x2mode
*Thedatacannotbesetto0XorX0except00.
Acknowledgement
[d][][SetID][][OK/NG][Data][x]
21. Tile H Position (Command: d e)
TosettheHorizontalposition.
Transmission
[d][e][][SetID][][Data][Cr]
DataMin:00HtoMax:14H
00H:Step-10(Left)
14H:Step10(Right)
Acknowledgement
[e][][SetID][][OK/NG][Data][x]
22. Tile V Position (Command: d f)
TosettheVerticalposition.
Transmission
[d][f][][SetID][][Data][Cr]
DataMin:00HtoMax:14H
00H:Step-10(Down)
14H:Step10(Up)
Acknowledgement
[f][][SetID][][OK/NG][Data][x]
17. ISM mode (Command: j p)
Usedtoselecttheafterimagepreventingfunction.
Transmission
[j][p][][SetID][][Data][Cr]
Data01:Inversion
 02:Orbiter
 04:WhiteWash
 08:Normal
Acknowledgement
[p][][SetID][][OK][Data][x]
18. Auto Configure (Command: j u)
Toadjustpicturepositionandminimizeimage
shaking.
Automatically.NB:OnlyappliestoRGB(PC)mode.
Transmission
[j][u][][SetID][][Data][Cr]
Data01:Toset
Acknowledgement
[u][][SetID][][OK][Data][x]
19. Key (Command: m c)
TosendIRremotekeycode.
Transmission
[m][c][][SetID][][Data][Cr]
DataKeycode:Referto‘IRCODES’.Seep.44
Acknowledgement
[c][][SetID][][OK][Data][x]