User guide

51
ENG
ENGLISH
EXTERNAL CONTROL DEVICE SETUP
11. Sharpness (Command: k k) (Video input only)
ToadjustthescreenSharpness.
YoucanalsoadjustthesharpnessinthePicture
menu.
Transmission
[k][k][][SetID][][Data][Cr]
DataMin:00HtoMax:64H
(Hexadecimalcode)
*Referto'Realdatamapping’.Seep.50
Acknowledgement
[k][][SetID][][OK][Data][x]
DataMin:00HtoMax:64H
12. OSD Select (Command: k l)
TocontrolOSDon/offtotheset.
Transmission
[k][l][][SetID][][Data][Cr]
Data00:OSDOff Data01:OSDOn
Acknowledgement
[l][][SetID][][OK][Data][x]
Data00:OSDOff Data01:OSDOn
13. Remote Lock /Key Lock (Command: k m)
TocontrolRemoteLockon/offtotheset.
Thisfunction,whencontrollingRS-232C,locksthe
remotecontrolandthelocalkeys.
Transmission
[k][m][][SetID][][Data][Cr]
Data00:Off Data01:On
Acknowledgement
[m][][SetID][][OK][Data][x]
Data00:Off Data01:On
14. Balance (Command: k t)
Toadjustthesoundbalance.
Transmission
[k][t][][SetID][][Data][Cr]
DataMin:00HtoMax:64H
(Hexadecimalcode)
00H:StepL50
64H:StepR50
Acknowledgement
[t][][SetID][][OK][Data][x]
DataMin:00HtoMax:64H
(Hexadecimalcode)
00H:Step0toL50
64H:Step100toR50
*Balance:L50toR50
15. Color Temperature (Command: k u)
Toadjustthescreencolortemperature.
Transmission
[k][u][][SetID][][Data][Cr]
Data00:Medium
 01:Cool
 02:Warm
Acknowledgement
[u][][SetID][][OK][Data][x]
Data00:Medium
 01:Cool
 02:Warm
16. Abnormal state (Command: k z)
UsedtoReadthepoweroffstatuswhenStand-by
mode.
Transmission
[k][z][][SetID][][Data][Cr]
DataFF:Read
Acknowledgement
[z][][SetID][][OK][Data][x]
Data00:Normal(Poweronandsignalexist)
 01:Nosignal(Poweron)
 02:Turnthemonitoroffbyremotecontrol
 03:Turnthemonitoroffbysleeptimefunction
 04:TurnthemonitoroffbyRS-232Cfunction
 08:Turnthemonitoroffbyofftimefunction
 09:Turnthemonitoroffbyautoofffunction