User guide

49
ENG
ENGLISH
CUSTOMIZING SETTINGS
Setting Description
PIP/PBP Videos or photos stored on the USB device can be displayed on a single monitor by dividing them
into the main and subscreens.
Option
Mode Sets the type of secondary screen.
*OFF: Disables the secondary screen.
*PIP (Picture In Picture): Displays the secondary screen in the main screen.
*PBP (Picture By Picture): Displays the secondary screen next to the main
screen.
Position Adjusts the position of the subscreen (top left, bottom left, top right, bottom
right) The default value is inthe bottom right.
Size Adjusts the size of the subscreen (Size 0-10). The default size of the PIP (Size:
0) is 480x270; the maximum size (Size: 10) is 960x540.
NOTE
y
The Position and Size options are enabled only in PIP mode.
Key Lock Turns the local key function on or off. If Key Lock is enabled, the local key does not work.
Interface Select Sets communication with Media Player and the connected PC.
Option
RS232C Communicates with the connected PC in serial mode.
SuperSign Communicates with Media Player.
PC Power Control Controls the power of the monitor with Media Player turned on.
Mode
Not connected This mode is displayed when the Media Player is not connected.
Off You can turn on or off the whole system.
On You can turn on or off the monitor while the Media Player is turned on.
Always On When you turn on the monitor while the Media Player is turned off, the Media
Player is turned on.
USB Content
Recovery
Replays the content in a USB when the power is back on if it is turned off during playing a
content. (This function operates the same when a USB is disconnected and connected again.)
Product/Service
Info.
Displays the model name, software version, serial number, IP address, MAC address, and
home page.