LCD TV OWNER’S MANUAL LCD TV MODELS 37LC2RR 42LC2RR http://www.lge.com http://ar.lge.com Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
Ow ner Ma nu al WARNING IMPORTANT SAFETY INSTRUCTIONS WARNING Important safety instructions shall be provided with each apparatus. This information shall be given in a separate booklet or sheet, or be located before any operating instructions in an instruction for installation for use and supplied with the apparatus. This information shall be given in a language acceptable to the country where the apparatus is intended to be used.
Ow ner WARNING Ma nu al IMPORTANT SAFETY INSTRUCTIONS WARNING W WARNING 9 Do not use water the product while cleaning. NOTE W 1 This may cause damaged the product or could give an elec- Never touch the power plug with a wet hand. This may cause an electric shock. tric shock. 2 Disconnect from the mains and remove all connections before moving.
NOTE W Ensure the power cord doesn’t trail across any hot objects like a heater. 13 This may cause a fire or an electric shock. 9 Do not plug when the power cord or the plug is damaged or the connecting part of the power outlet is loose. Accumulated dust can cause mechanical failure. 14 This may cause a fire or an electric shock. 10 Dispose of used batteries carefully to protect a child from eating them. Contact the service center once a year to clean the internal part of the product.
CONTENTS WARNING ............................................... 1-3 SPECIAL FUNCTIONS DVR (Digital Video Recorder) INTRODUCTION CONTENTS Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Home Menu . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Controls / Connection Options . . . . . . . . . . . . . . . . . . . . . 8-9 Remote Control Key Functions . . . . . . . . . . . .
TV MENU On Screen Menus Selection and Adjustment Screen Adjustment .... 43 Setup(Channel) Picture Adjustment Auto Picture Control (APC) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 49 Manual Picture Control (APC-User Option) . . . . . . 50 Auto Color Temperature Control (ACC) . . . . . . . . . . . 51 Manual Color Temperature Control (ACC-User Option) . . 52 XD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION ACCESSORIES Ensure that the following accessories are included with your product. If an accessory is missing, please contact the dealer where you purchased the product. INPUT TV TV POWER INPUT DVD ARC CAPTION PIP CH- VCR PIP SIZE PIP CH+ SWAP POSITION PIP INPUT MARK MEMORY/ERASE INTRODUCTION Owner's Manual TIME MACHINE EXIT LIVE TV MENU SLEEP ENTER TIME CONTROL TIME CONTROL FCR VOL 1.5V 1.
HOME MENU This menu is a contents guide. In Home Menu, you enter the Recorded TV, Manual Rec, Scheduled List or TV Menu. TIME MACHINE TV POWER INPUT DVD ARC VCR CAPTION PIP CH- PIP SIZE PIP CH+ SWAP TIME MACHINE EXIT TIME CONTROL Home POSITION PIP INPUT MARK MEMORY/ERASE LIVE TV Free Space High 3h 19m Normal 5h 24m Recorded TV MENU SLEEP ENTER TIME CONTROL DVR p.29 Manual Rec. Scheduled List TV Menu TV Menu p.
INTRODUCTION CONTROLS ■ This is a simplified representation of the front panel. Here shown may be somewhat different from your TV. Front Panel Controls INTRODUCTION CH CH VOLVOL CHANNEL Buttons VOLUME Buttons ENTER ENTER ENTER Button MENU MENU MENU Button INPUT INPUT INPUT Button R POWER Button Remote Control Sensor Power Standby Indicator Illuminates red in standby mode. Illuminates white when the set is switched on.
CONNECTION OPTIONS ■ Here shown may be somewhat different from your TV. Back Connection Panel VIDEO L/MONO AUDIO R AUDIO Input Connections are available for listening stereo sound from an external device. L/MONO VIDEO Input Connects the video signal from a video device.
INTRODUCTION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the TV. POWER Turns your TV or any other programmed equipment on or off, depending on mode. TV INPUT Returns to the TV mode. INTRODUCTION INPUT If you press the button once, the input source OSD will appear on screen as shown. Press the D / E button and then ENTER button to select the desired input source (TV, AV1, AV2, Component 1, Component 2, RGB, HDMI1/DVI, or HMDI 2).
MODE Selects the remote operating mode: TV, VCR, DVD. PIP Switches the sub picture PIP, DW, POP mode. G p.41 SIZE Adjusts the sub picture size. G p.42 POSITION Moves the sub picture. G p.42 PIP CH - /+ Selects a channel for the sub picture. G p.41 INTRODUCTION SWAP Exchanges the main/sub images in PIP/Double window mode. G p.42 PIP INPUT Select the connected input source for the sub-picture. G p.41 VCR/DVD Control video cassette recorders or DVD players.
INSTALLATION WIRE ARRANGEMENT ■ Here shown may be somewhat different from your TV. 1 Connect the cables as necessary. After connecting the cables neatly, arrange the cables to the Cable Holder. To connect an additional equipment, see the Connections & Setup section. INSTALLATION AC IN CABLE HOLDER 2 Install the CABLE MANAGEMENT as shown. CABLE MANAGEMENT How to remove the CABLE MANAGEMENT G 3 Hold the CABLE MANAGEMENT with both hands and pull it upward.
ATTACHING THE TV TO A WALL We recommend that you set up the TV close to a wall so it cannot fall over if pushed backwards. Additionally, we recommend that the TV be attached to a wall so it cannot be pulled in a forward direction, potentially causing injury or damaging the product. Caution: Please make sure that children don’t climb on or hang from the TV. INSTALLATION ■ Insert the eye-bolts (or TV brackets and bolts) to tighten the product to the wall as shown in the picture.
CONNECTIONS & SETUP ■ To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied.
VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV ■ If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. This phenomenon is common to all manufactures and in consequence the manufactures warranty does not cover the product bearing this phenomenon.
VIDEO L R S-VIDEO ANT IN OUTPUT SWITCH ANT OUT When connecting with a RCA cable 1. How to connect 1 V I D E O jacks between TV and Connect the A U D I O/V VCR. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red) 1 GB IN AUDIO (RGB/DVI) AV OUT ■ Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) CONNECTIONS & SETUP Select A V 1 input source with using the I N P U T button on the remote control.
EXTERNAL EQUIPMENT CONNECTIONS 1. How to connect Camcorder 1 V I D E O jacks Connect the A U D I O/V between TV and external equipment. Match the jack colors. (Video = yellow, Audio Left = white, and Audio Right = red) Video Game Set VIDEO L R 2. How to use L/MONO R 1 VIDEO ■ AUDIO ■ Select A V 1 input source with using the I N P U T button on the remote control. If connected to A V I N 2, select A V 2 input source. Operate the corresponding external equipment.
AV OUT SETUP The TV has a special signal output capability which allows you to hook up the second TV or monitor. 1. How to connect 1 Connect the second TV or monitor to the TV’s AV OUT jacks. 2 See the Operating Manual of the second TV or monitor for further details regarding that device’s input settings. AUDIO RGB/DVI) AV OUT S-VIDEO CONNECTIONS & SETUP 18 G Component, RGB, HDMI input sources cannot be used for AV out. G We recommend to use the AV OUT jacks for VCR recording.
DVD SETUP When connecting with a component cable 1. How to connect 1 Y Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O 1 jacks on the set. PB PR 1 R 2 VARIABLE AUDIO OUT 2. How to use ■ Turn on the DVD player, insert a DVD. ■ Select C o m p o n e n t 1 input source with using the I N P U T button on the remote control. ■ If connected to C O M P O N E N T I N 2 input, select C o m p o n e n t 2 input source.
CONNECTIONS & SETUP VIDEO When connecting with an S-Video cable 1. How to connect 1 2 VIDEO Connect the S-VIDEO output of the DVD to the S - V I D E O input on the set. S-VIDEO L ANT IN R OUTPUT SWITCH Connect the audio outputs of the DVD to the A U D I O input jacks on the set. ANT OUT 1 2 RGB IN CONNECTIONS & SETUP ■ Turn on the DVD player, insert a DVD. ■ Select A V 1 input source with using the I N P U T button on the remote control.
HDSTB (SET-TOP BOX) SETUP When connecting with a component cable Y PB PR L R 1. How to connect 1 Connect the video outputs (Y, PB, PR) of the digital set top box to the C O M P O N E N T I N V I D E O 1 jacks on the set. Match the jack colors (Y = green, PB = blue, and PR = red). 1 2 VARIABLE AUDIO OUT Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O 1 jacks on the set. COMPONENT IN 2. How to use ■ Turn on the digital set-top box.
CONNECTIONS & SETUP When connecting with a D-sub 15 pin cable RGB IN RGB (PC/DTV) 1 Connect the RGB output of the digital set-top box to the R G B ( P C / D T V) jack on the set. 2 Connect the audio outputs of the set-top box to the A U D I O ( R G B / D V I) jack on the set. MI IN A 2 DVI) RS-232C IN (CONTROL & SERVICE) AV IN 1 1. How to connect 2. How to use CONNECTIONS & SETUP ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
When connecting with a HDMI to DVI cable RGB IN 1. How to connect RGB (PC/DTV) HDMI IN 1 Connect the DVI output of the digital set-top box to the H D M I I N 1 ( D V I ) jack on the set. TE OL 2 1 (DVI) 2 RS-232C IN (CONTROL & SERVICE) AV IN 1 AUDIO Connect the audio output of the digital set-top box to the A U D I O( R G B / D V I) jack on the set. ■ Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
CONNECTIONS & SETUP PC SETUP This TV provides Plug and Play capability, meaning that the PC adjusts automatically to the TV's settings. When connecting with a D-sub 15 pin cable 1. How to connect Connect the RGB output of the PC to the R G B ( P C / D T V) jack on the set. 2 Connect the PC audio output to the A U D I O ( R G B / D V I) jack on the set. RGB IN RGB (PC/DTV) AUDIO (RGB/DVI) N ) AV O RS-232C IN (CONTROL & SERVICE) AV IN 1 CONNECTIONS & SETUP 1 2.
When connecting HDMI to DVI cable 1. How to connect Connect the PC audio output to the A U D I O ( R G B / D V I ) jack on the set. 2. How to use ■ Turn on the PC and the set ■ Select H D M I 1 / D V I input source with using the I N P U T button on the remote control. 2 1 (DVI) RS-232C IN (CONTROL & SERVICE) 1 S-VIDEO 2 DVI-PC OUTPUT VIDE CONNECTIONS & SETUP 2 HDMI IN TE OL AUDIO (RGB/DVI) AV IN 1 1 Connect the DVI output of the PC to the H D M I I N 1 ( D V I ) jack on the set.
CONNECTIONS & SETUP Supported Display Resolution (RGB[PC]/HDMI [PC] mode) CONNECTIONS & SETUP Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 640x480 31.469 37.500 59.94 75.00 720x400 31.469 70.08 800x600 37.879 46.875 60.31 75.00 832x624 49.725 74.55 1024x768 48.363 56.476 60.023 60.00 70.06 75.02 1280x768 47.693 59.99 1360x768 47.700 60.00 1366x768 47.700 60.
BASIC OPERATION TURNING THE TV ON First, connect power cord correctly. At this moment, the TV switches to standby mode. ■ In standby mode to turn TV on, press the , INPUT, C H D / E button on the TV or press the POWER, T V, INPUT, CH +/-, Number(0~9 9 ) button on the remote control and then the TV will switch on.
BASIC OPERATION ON-SCREEN MENUS LANGUAGE SELECTION The menus can be shown on the screen in the selected language. First select your language. BASIC OPERATION 28 1 Press the M E N U button and then use D or E button to select the S P E C I A L menu. 2 Press the G button and then use D or E button to select L a n g u a g e . 3 Press the G button and then use D or E button to select your desired language. From this point on, the on-screen menus will be shown in the selected language.
SPECIAL FUNCTIONS DVR (Digital Video Recorder) TIME CONTROL MARK MEMORY/ERASE TIME MACHINE LIVE TV MENU EXIT This function allows the unit to automatically record live TV and make it available for reviewing at any time. With Time control turned on, you may pause and rewind normal TV viewing at any time without missing any of the live broadcast. SLEEP ENTER TIME CONTROL TIME CONTROL FCR VOL CH MUTE CHANNEL 1 PICTURE Press the MENU button and then use D or E button to select the D V R menu.
SPECIAL FUNCTIONS DVR (Digital Video Recorder) PROGRESSING THE TIME CONTROL FUNCTION 3 1 4 2 1 The ‘Progress Bar’? After selecting the T i m e c o n t r o l O n, press the E N T E R button. This function indicates a possible DVR reshowing section ,a current on-screen and real on-broad- ■ As soon as Time control starts, a progress bar indicating the current recording status is displayed in the bottom of the screen.
PIP CH- Progressing the Time control function, play PIP CH+ SWAP PIP INPUT MARK LIVE TV - On progressing Time control, It can do a diversified playing. MEMORY/ERASE TIME MACHINE MENU EXIT SLEEP Indicates that the current broadcast and displayed video differ. ENTER TIME CONTROL Play Pause TIME CONTROL FCR VOL CH MUTE Using the remote control You can shift playback to any point within playing the recorded program. When playing, repeatedly, press the R E W( x50 -> x100 .
SPECIAL FUNCTIONS DVR (Digital Video Recorder) RECORDING Use this function to record the program you are watching on the main screen. If you apply Main power off before finish recording it is not recorded the programs that was recording before. Instant Record This function records the currently displayed programme. 1 Select the desired programme to record and then press the button. During recording is displayed. Use this feature to record up to 2 hours of programming.
The extra recording time added to existing setting equals the final recording time. 1:00 AM Recording time 1:00 AM~2:00 AM (0 Min recorded) After adjusting the recording time, select ENTER. The Status bar will be displayed. 4 No change Total recording duration 3 0:00 / 2:00 Elapsed recording time ■ Press the E X I T button to hide the Status bar. Press the ENTER button to display the Status bar. Recording stops when the selected duration is reached or when you press the button.
SPECIAL FUNCTIONS DVR (Digital Video Recorder) WATCHING & RECORD INPUT TV While recording, you can change programmes or inputs without disturbing the recording. The broadcast being recorded can be shown in the lower-right corner of the main screen. TV POWER INPUT DVD ARC VCR CAPTION PIP CH- PIP PIP CH+ MEMORY/ERASE SIZE POSITION SWAP PIP INPUT MARK LIVE TV TIME MACHINE EXIT MENU SLEEP After starting an Instant Record or Reserved Record, change the program or input.
RECORDED TV MARK MEMORY/ERASE You can watch the recorded program list at a glance. This function is available to use in DVR menu. LIVE TV MENU EXIT Press the button to display H o m e menu. Use the D or E button to select the Recorded TV and then use the ENTER or G button.
SPECIAL FUNCTIONS 3 DVR (Digital Video Recorder) Use D E F G button to navigate the appropriate thumbnail photo, then press the ENTER button to open the Popup Menu. Input Date Duration Quality Free Space High 3h 19m Normal 5h 24m Play : Begin playback of selected recording. G Mark All : mark all photos on the screen. G Unmark All : Change marked photos to unmarked photos. G D e l e t e : Delete the selected recording. G Rename : Edit recorded program title. G C a n c e l : Close the Pop-up Menu.
USING THE REMOTE CONTROL You can shift playback to any point within playing the recorded program. When playing, repeatedly, press the R E W( x50 -> x100 -> . MARK repeatedly, press the F F( -> x50 -> x100 . ■ MARK ) button to speed up ) button to speed up x2 -> -> x2 x5 x5 -> -> x10 x10 Pressing these buttons repeatedly increases the fast forward/reverse speed. Press the or ■ Press the ■ Pressing the LIVE TV button to move back and forth within the current program.
SPECIAL FUNCTIONS DVR (Digital Video Recorder) MANUAL RECORDING MARK MEMORY/ERASE TIME MACHINE EXIT This function is easy to register to reserved recording. This function is available to use in DVR menu. When Manual Recording, it’s stored the default sound of the set. TIME CONTROL LIVE TV MENU SLEEP ENTER TIME CONTROL FCR VOL CH MUTE TIME MACHINE 1 Press the button to display H o m e menu. Use the or button to select the M a n u a l R e c . and then use D E the E N T E R or G button.
SCHEDULED LIST MARK MEMORY/ERASE TIME MACHINE EXIT You can store up to 8 programmes. This function is available to use in DVR menu. LIVE TV MENU SLEEP ENTER TIME CONTROL TIME CONTROL TIME MACHINE Home 1 Free Space Press the button to display H o m e menu. Use the D or E button to select the Scheduled List and then use the ENTER or G button. TIME MACHINE High 3h 19m Normal 5h 24m Recorded TV Manual Rec. Scheduled List 2 Scheduled List screen is displayed as shown below.
SPECIAL FUNCTIONS DVR (Digital Video Recorder) FORMAT HARD DISK MARK MEMORY/ERASE TIME MACHINE LIVE TV MENU EXIT SLEEP ENTER TIME CONTROL TIME CONTROL FCR VOL CH MUTE 1 Press the M E N U button and then use D or E button to select the D V R menu. CHANNEL PICTURE SOUND 2 TIMER Press the G button and then use D or E button to select the HDD Format.
SPECIAL FUNCTIONS PIP / DOUBLE WINDOW / POP PIP lets you view 2 different inputs (sources) on your TV screen at the same time. One source will be large, and the other source will show a smaller inset image. Double Window mode splits the screen into two images, allowing two picture sources to be shown on the TV screen at the same time. Each source is given half the screen. Watching PIP/Double Window/POP Press the P I P button to access the sub picture.
SPECIAL FUNCTIONS PIP / DOUBLE WINDOW / POP Sub Picture Size Adjustment (PIP mode only) INPUT TV TV POWER INPUT Press the S I Z E button to adjust the sub picture size. With S I Z E button in PIP mode, sub picture is adjusted. DVD ARC CAPTION PIP CH- VCR PIP SIZE PIP CH+ POSITION SWAP PIP INPUT MARK LIVE TV Moving the Sub Picture (PIP mode only) MEMORY/ERASE Press the P O S I T I O N button. Repeatedly press the P O S I T I O N button then sub picture moves.
TV MENU ON SCREEN MENUS SELECTION AND ADJUSTMENT Your TV's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 Press the M E N U button and then use D or E button to select the each menu. 2 Press the G button and then use D CHANNEL CHANNEL PICTURE SOUND E F G button to display the available menus.
TV MENU SETUP (CHANNEL) AUTO PROGRAM: CHANNEL SEARCH MARK MEMORY/ERASE TIME MACHINE EXIT Auto Program should be used to memorize all the active channels in your area before you are able to use the TV. There are two ways of storing channels in the TV's memory. You can use either. One is called AUTO PROGRAM and the other is called MANUAL PROGRAM. In AUTO PROGRAM mode, the TV will memorize the channels in ascending numerical order.
MANUAL PROGRAM : ADDING/DELETING CHANNELS MARK MEMORY/ERASE EXIT You can add or delete channels from the channel scan manually. Note: When you set up the Time coltrol or Recording, Adding/Deleting channels menu is not available. SLEEP CH MUTE Use the C H - / + or NUMBER buttons to select the channel number you want to add or delete. 2 Press the M E M O R Y / E R A S E button. 3 Press the M E M O R Y / E R A S E button to select M e m o r y or E r a s e. 4 Press the E N T E R button.
TV MENU SETUP (CHANNEL) FINE TUNING ADJUSTMENT MARK MEMORY/ERASE TIME MACHINE LIVE TV MENU EXIT Normally fine tuning is only necessary if reception is poor. To remove fine tuning from a channel, reprogram the finely-tuned channel with Auto program or Manual Program. If a finely-tuned channel is memorized, the color of the channel number changes to yellow.
BOOSTER MARK MEMORY/ERASE TIME MACHINE LIVE TV MENU EXIT If the reception is poor at the fringe area of TV signal, select B o o s t e r to o n. SLEEP ENTER TIME CONTROL TIME CONTROL FCR VOL CH MUTE CHANNEL PICTURE 1 Press the M E N U button and then D or E button to select the C H A N N E L menu. SOUND 1 2 3 4 5 6 7 8 9 Auto program Manual program Favorite channel TIMER SPECIAL SCREEN DVR 2 Press the G button and then D or E button to select M a n u a l p r o g r a m.
TV MENU SETUP (CHANNEL) FAVORITE CHANNELS SETUP MARK MEMORY/ERASE TIME MACHINE EXIT Favorite Channels is a convenient feature that lets you quickly scan up to 8 channels of your choice without having to wait for the TV to scan through all the in-between channels. To tune to a favorite channel, press the F C R (Favorite Channel Review) button repeatedly. The 8 favorite channels appear on the screen in numerical order.
TV MENU PICTURE ADJUSTMENT AUTO PICTURE CONTROL (APC) MARK MEMORY/ERASE TIME MACHINE APC adjusts the TV for the best picture appearance. Select the preset value in the APC menu based on the program category. Clear, Optimum, S o f t Settings are preset for optimum picture quality at the factory and are not adjustable. In the U s e r 1 and U s e r 2 modes only, you can directly adjust the contrast, brightness, color, sharpness, tint.
TV MENU PICTURE ADJUSTMENT MANUAL PICTURE CONTROL (APC-USER OPTION) MARK MEMORY/ERASE TIME MACHINE LIVE TV MENU EXIT Adjust the picture appearance to suit your preference and viewing situations. SLEEP ENTER TIME CONTROL TIME CONTROL FCR VOL CH MUTE 1 CHANNEL 1 3 APC PICTURE Press the M E N U button and then D or E button to select the P I C T U R E menu. 2 ACC SOUND TIMER Advanced SPECIAL Reset SCREEN DVR Press the G button and then D or E button to select A P C.
AUTO COLOR TEMPERATURE CONTROL (ACC) MARK MEMORY/ERASE TIME MACHINE Choose one of three automatic color adjustments. Set to warm to enhance hotter colors such as red, or set to cool to see less intense colors with more blue. LIVE TV MENU EXIT SLEEP ENTER TIME CONTROL TIME CONTROL FCR VOL CH MUTE CHANNEL 1 PICTURE Press the M E N U button and then D or E button to select the P I C T U R E menu.
TV MENU PICTURE ADJUSTMENT MANUAL COLOR TEMPERATURE CONTROL (ACC - USER OPTION) MARK MEMORY/ERASE TIME MACHINE EXIT SLEEP ENTER TIME CONTROL You can also adjust the detailed settings (Red, Green, Blue) by selecting the u s e r menu. LIVE TV MENU TIME CONTROL FCR VOL CH MUTE CHANNEL PICTURE APC ACC SOUND 1 Press the M E N U button and then D or E button to select the P I C T U R E menu.
MARK MEMORY/ERASE TIME MACHINE XD is LG Electronic’s unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. PICTURE Press the M E N U button and then use D or E button to select the P I C T U R E menu. Selecting the Manual 1. Press the G button and then use D or E button to select X D C o n t r a s t, X D C o l o r or X D N R ( N o i s e ), M P E G N R.
TV MENU PICTURE ADJUSTMENT ADVANCED-CINEMA MODE SETUP MARK MEMORY/ERASE TIME MACHINE LIVE TV MENU EXIT Set up the TV for the best picture appearance for viewing movies. When you operate Cinema (3:2 Pull-Down Mode or Cinema Correction Mode), the TV will adjust 24 fps video from movies to 30 fps video for display. This feature operates only in Analog TV, AV and Component 480i mode.
ADVANCED-BLACK LEVEL MARK MEMORY/ERASE TIME MACHINE Adjusting the contrast and the brightness of the screen using the black level of the screen. LIVE TV MENU EXIT SLEEP ENTER TIME CONTROL This feature operates only in AV (NTSC-M) or HDMI mode. TIME CONTROL FCR VOL CH MUTE CHANNEL 1 Press the M E N U button and then D or E button to select the P I C T U R E menu.
TV MENU PICTURE ADJUSTMENT RESET MARK MEMORY/ERASE Use to quickly reset all the Picture menu options to their original factory preset values. LIVE TV MENU TIME MACHINE EXIT SLEEP ENTER TIME CONTROL TIME CONTROL FCR VOL CH MUTE CHANNEL 1 PICTURE Press the M E N U button and then D or E button to select the P I C T U R E menu.
TV MENU SOUND ADJUSTMENT DIGITAL AUTO SOUND PROCESSING (DASP) MARK MEMORY/ERASE TIME MACHINE EXIT DASP lets you enjoy the best sound without any special adjustment because the TV sets the appropriate sound options based on the program content. LIVE TV MENU SLEEP ENTER TIME CONTROL TIME CONTROL FCR S u r r o u n d M A X, F l a t, M u s i c, M o v i e, and S p o r t s are preset for good sound quality at the factory and are not adjustable.
TV MENU SOUND ADJUSTMENT MANUAL SOUND CONTROL (DASP - USER OPTION) MARK MEMORY/ERASE TIME MACHINE EXIT SLEEP ENTER TIME CONTROL You can adjust sound options Treble, and Bass to the levels you prefer. LIVE TV MENU TIME CONTROL FCR VOL CHANNEL 1 Press the M E N U button and then D or E button to select the S O U N D menu.
AUTO VOLUME LEVELER (AVL) MARK MEMORY/ERASE TIME MACHINE EXIT AVL automatically keeps on an equal volume level even if you change program. LIVE TV MENU SLEEP ENTER TIME CONTROL TIME CONTROL FCR VOL CH MUTE CHANNEL PICTURE 1 Press the M E N U button and then D or E button to select the S O U N D menu. SOUND TIMER DASP AVL Balance 0 Speaker SPECIAL DVR 2 Press the G button and then D or E button to select A V L. 1 3 Press the G button and then D or E button to select O n or O f f.
TV MENU SOUND ADJUSTMENT BALANCE ADJUSTMENT MARK MEMORY/ERASE TIME MACHINE EXIT Adjust the left/right sound of speaker to suit your taste and room situations. LIVE TV MENU SLEEP ENTER TIME CONTROL TIME CONTROL FCR VOL CH MUTE CHANNEL 1 PICTURE Press the M E N U button and then D or E button to select the S O U N D menu. SOUND TIMER DASP AVL Balance 0 Speaker SPECIAL SCREEN DVR TV MENU / SOUND ADJUSTMENT 2 Press the G button and then D or E button to select B a l a n c e.
TV SPEAKERS SETUP MARK MEMORY/ERASE TIME MACHINE EXIT You can adjust internal speaker status. If you want to use your external hi-fi stereo system, turn off the internal speakers of the set. LIVE TV MENU SLEEP ENTER TIME CONTROL TIME CONTROL FCR VOL CH MUTE CHANNEL 1 Press the M E N U button and then D or E button to select the S O U N D menu. PICTURE SOUND TIMER DASP AVL Balance 0 Speaker SPECIAL SCREEN Press the G button and then D or E button to select S p e a k e r.
TV MENU SOUND ADJUSTMENT STEREO/SAP BROADCASTS SETUP The TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program; if the broadcaster transmits one additional sound signal in addition to the original one. Mono: The primary language is heard from left and right speakers. Signal mode is mono. Stereo: The primary language is heard from left and right speakers. Signal mode is stereo.
TV MENU TIME SETTING CLOCK SETUP MARK MEMORY/ERASE LIVE TV MENU TIME MACHINE EXIT SLEEP If the current time setting is wrong, reset the clock manually. ENTER TIME CONTROL TIME CONTROL FCR VOL CH MUTE 1 2 3 4 5 6 7 8 9 MTS 0 REVIEW Press the M E N U button and then D or E button to select the T I M E R menu. CHANNEL 2 1 Clock PICTURE Press the G button and then D or E button to select C l o c k.
TV MENU TIME SETTING ON/OFF TIMER SETUP MARK MEMORY/ERASE LIVE TV MENU TIME MACHINE EXIT The timer function operates only if the current time has been set. The Off-Timer function overrides the On-Timer function if they are both set to the same time. The TV must be in standby mode for the On-Timer to work. If you do not press any button within 2 hours after the TV turns on with the On Timer function, the TV will automatically revert to standby mode.
AUTO OFF MARK MEMORY/ERASE TIME MACHINE EXIT If set to on and there is no input signal, the TV turns off automatically after 10 minutes. LIVE TV MENU SLEEP ENTER TIME CONTROL TIME CONTROL FCR VOL CH MUTE CHANNEL 1 1 2 3 4 5 6 7 8 9 MTS 0 REVIEW Clock PICTURE Press the M E N U button and then use D or E button to select the T I M E R menu. Off timer SOUND On timer TIMER Auto off SPECIAL SCREEN DVR 1 3 Press the G button and then use D or E button to select O n or O f f.
TV MENU TIME SETTING SLEEP TIMER INPUT TV TV POWER INPUT The Sleep Timer turns the TV off at the preset time. Note that this setting is cleared when the TV is turned off. DVD ARC CAPTION PIP CH- VCR PIP PIP CH+ SIZE SWAP POSITION PIP INPUT MARK MEMORY/ERASE TIME MACHINE EXIT TIME CONTROL 1 2 TV MENU / TIME SETTING 66 Press the S L E E P button repeatedly to select the number of minutes.
TV MENU SPECIAL FEATURES KEY LOCK MARK MEMORY/ERASE TIME MACHINE LIVE TV MENU EXIT The TV can be set so that the remote control is needed to control it. This feature can be used to prevent unauthorized viewing by locking out the front panel controls. This TV is programmed to remember which option it was last set to even if you turn the set off. Press the M E N U button and then use to select the S P E C I A L menu.
TV MENU SPECIAL FEATURES CLOSED CAPTIONS Closed captioning is a process which converts the audio portion of a television program into written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs. 1. Poor reception conditions are encountered: • IGNITION: Picture may flutter, drift, suffer from black spots, or horizontal streaking.
XD DEMO MARK MEMORY/ERASE TIME MACHINE LIVE TV MENU EXIT Use it to see the difference between XD Demo on and XD Demo off. ENTER TIME CONTROL Note: When you set up the Time control, XD Demo menu is not available. It’s not available to use this function in RGB-PC, HDMI-PC mode. Press the M E N U button and then use to select the S P E C I A L menu.
TV MENU SCREEN ADJUSTMENT AUTO CONFIGURE (RGB [PC] MODE ONLY) MARK MEMORY/ERASE TIME MACHINE LIVE TV MENU EXIT Automatically adjusts picture position and minimizes image shaking. Although the image is still not correct, your set is functioning properly but needs further adjustment. SLEEP ENTER TIME CONTROL TIME CONTROL FCR VOL CH MUTE CHANNEL 1 Press the M E N U button and then use to select the S C R E E N menu.
MANUAL CONFIGURE MARK MEMORY/ERASE TIME MACHINE LIVE TV MENU EXIT If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. This function works in the following mode : RGB-PC, RGBDTV 480p/720p/1080i, Component 480p/720p/1080i, HDMI 480p/720p/1080i. It’s not available to use Phase, Clock function in RGB-DTV 480p/720p/1080i, Component 480p/720p/1080i, HDMI 480p/720p/1080i.
TV MENU SCREEN ADJUSTMENT SELECTING WIDE XGA MODE MARK MEMORY/ERASE TIME MACHINE LIVE TV MENU EXIT To see a normal picture, match the resolution of RGB mode and selection of XGA mode. SLEEP ENTER TIME CONTROL This function works in the following mode: RGB[PC] mode. TIME CONTROL FCR VOL CH MUTE CHANNEL PICTURE 1 Press the M E N U button and then use to select the S C R E E N menu.
ASPECT RATIO CONTROL (ARC) INPUT TV TV POWER INPUT This feature lets you choose the way an analog picture with a 4:3 aspect ratio is displayed on your TV. When you receive an analog picture with a 4:3 aspect ratio on your 16:9 TV, you need to specify how the picture is to be displayed. ■ RGB-PC and HDMI PC input source use 4:3 or 16:9 aspect ratio. ■ Component (480p,720p,1080i), RGB-DTV, HDMI1/DVI-DTV, HDMI2-DTV input source use 4:3, 16:9, Zoom1, and Zoom2 aspect ratio.
TV MENU SCREEN ADJUSTMENT INITIALIZING (RESET TO ORIGINAL FACTORY SETTINGS) MARK MEMORY/ERASE TIME MACHINE LIVE TV MENU EXIT This function operates in current mode. To initialize the adjusted value. SLEEP ENTER TIME CONTROL TIME CONTROL FCR VOL CH MUTE CHANNEL PICTURE 1 Press the M E N U button and then use to select the S C R E E N menu. D or E button SOUND TIMER SPECIAL SCREEN DVR TV MENU / SCREEN ADJUSTMENT 2 Press the G button and then use select R e s e t.
APPENDIX EXTERNAL CONTROL DEVICE SETUP Connect the RS-232C (serial port) input jack to an external control device (such as a computer or an A/V control system) to control the product’s functions externally. Connect the serial port of the control device to the RS-232C jack on the product back panel. Note: RS-232C connection cables are not supplied with the product.
APPENDIX RS-232C Configurations 7-Wire Configurations (Standard RS-232C cable) RXD TXD GND DTR DSR RTS CTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 8 7 D-Sub 9 D-Sub 9 3-Wire Configurations(Not standard) TXD RXD GND DSR DTR CTS RTS PC TV 2 3 5 4 6 7 8 3 2 5 6 4 7 8 D-Sub 9 D-Sub 9 RXD TXD GND DTR DSR RTS CTS TXD RXD GND DTR DSR RTS CTS Set ID MARK MEMORY/ERASE Use this function to specify a TV ID number. Refer to ‘Real Data Mapping 1’. G p . 8 1.
Command Reference List COMMAND1 COMMAND2 DATA (Hexadecimal) a 0~1 k c G P. 78 k d 0~1 04. Volume Mute k e 0~1 05. Volume Control k f 0 ~ 64 01. Power k 02. Aspect Ratio 03. Screen Mute COMMAND1 COMMAND2 15. Treble DATA (Hexadecimal) 0 ~ 64 k r 16. Bass k s 0 ~ 64 17. Balance k t 0 ~ 64 18. Color Temperature k u 0~3 19. Red Adjustment k v 0 ~ 50 06. Contrast k g 0 ~ 64 20. Green Adjustment k w 0 ~ 50 07. Brightness k h 0 ~ 64 21.
APPENDIX 0 5 . Volume Control (Command2:f) 0 1 . Power (Command2:a) To control Power On/Off of the TV. Transmission [k][a][ ][Set ID][ ][Data][Cr] Data 0 : Power Off Data 1 : Power On Acknowledgement [a][ ][Set ID][ ][OK][Data][x] To show Power On/Off. To adjust volume. You can also adjust volume with the volume buttons on remote control. Transmission [k][f][ ][Set ID][ ][Data][Cr] Data Min : 0 ~ Max : 64 Refer to ‘Real data mapping 1 ’. See page 81.
10. Sharpness (Command2:k) 15. Treble (Command2:r) To adjust the screen sharpness. You can also adjust sharpness in the Picture menu. To adjust treble. You can also adjust treble in the Sound menu. Transmission [k][k][ ][Set ID][ ][Data][Cr] Transmission [k][r][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 64 Data Min: 0 ~ Max: 64 Refer to ‘Real data mapping 1’. See page 81. Refer to ‘Real data mapping 1’. See page 81. Acknowledgement [k][ ][Set ID][ ][OK][Data][x] 11. OSD Select (Command2:l) 16.
APPENDIX 25. Key (Command1:m, Command2:c) 2 1 . Blue Adjustment (Command2:$) To adjust blue in color temperature. To send IR remote key code. Transmission [k][$][ ][Set ID][ ][Data][Cr] Transmission [m][c][ ][Set ID][ ][Data][Cr] Data Min: 0 ~ Max: 50 Data: Key code - Refer to page 83. Refer to ‘Real data mapping 2’. See page 81. Acknowledgement [c][ ][Set ID][ ][OK][Data][x] Acknowledgement [$][ ][Set ID][ ][OK][Data][x] 26 . Auto Configure (Command1:j, Command2:u) 22.
28. Input select (Command1:x, Command2:y) To adjust input source for sub picture in PIP mode.
APPENDIX IR CODES 1. How to Connect ■ Connect your wired remote control to the Remote Control port on the TV. 2. Remote Control IR Codes ■ Output waveform Single pulse, modulated with 37.
(Hexa) Code Function Note Code Function 0F TV Remote control Button 44 ENTER Remote control Button 0B INPUT Remote control Button 72 PIP CH- Remote control Button 08 POWER Remote control Button (Power On/Off) 71 PIP CH+ Remote control Button C4 POWER ON Discrete IR Code (Only Power On) 61 PIP INPUT Remote control Button C5 POWER OFF Discrete IR Code (Only Power OFF) 02 VOL + Remote control Button 60 PIP Remote control Button 03 VOL - Remote control Button 0E SLEEP R
APPENDIX PROGRAMMING THE REMOTE CONTROL The provided universal remote control can be programmed to operate most remote-controllable devices. Note that the remote may not control all models of other brands. Programming a code into a remote mode APPENDIX 1 To find out whether your remote control can operate each device without programming, turn on the device (such as a VCR) and press the corresponding mode button on the remote. After that, press the POWER button.
VCRs Brand AIWA AKAI Codes Codes Brand MAGNAVOX 031 067 012 069 101 027 031 003 033 101 045 013 013 049 151 034 024 012 048 043 053 066 133 SAMSUNG 043 046 124 146 MARANTZ 033 023 037 031 103 039 043 129 033 MARTA MATSUI MEI MEMOREX 040 033 007 108 116 135 041 010 064 110 111 117 119 MGA MINOLTA MITSUBISHI 023 039 043 053 017 031 037 131 008 025 034 046 138 009 033 109 136 012 018 063 033 033 013 066 063 072 144 147 031 050 150 034 048 012 106 027 035 101 153 010 045 026 034 137 150 01
APPENDIX TROUBLESHOOTING CHECKLIST The operation does not work normally. Check to see if there is any object between the product and the remote control causing obstruction. Ensure you are pointing the remote control directly at the TV. ■ Ensure that the batteries are installed with correct polarity (+ to +, - to -). ■ Ensure that the correct remote operating mode is set: TV, VCR etc. ■ Install new batteries.
The audio function does not work. Press the VOL or VOLUME button. ■ Sound muted? Press MUTE button. ■ Try another channel. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ Picture OK & No sound No output from one of the speakers ■ Adjust Balance in menu option. ■ A change in ambient humidity or temperature may result in an unusual noise when the product is turned on or off and does not indicate a fault with the product.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
