User guide

19
CONNECTIONS & SETUP
S-VIDEO
OUT
IN
(R) AUDIO (L) VIDEO
3 4
OUTPUT
SWITCH
ANT OUT
ANT IN
RGB IN
MONO
(( ))
AUDIOAUDIO
VIDEOVIDEO
S-VIDEOS-VIDEO
AAV IN 3V IN 3
RS-232C INRS-232C IN
(CONTROL(CONTROL && SERSERVICE)VICE)
RGB
(PC/DTV)
AUDIO
(RGB/DVI)
VV CC RR
GG
If the S-VIDEO(Y/C) signal is received through the Euro scart socket 2 (AV2), you must change to
the S-Video2 mode.
GG
If you want to use the EURO scart cable, you have to use the signal shielded Euro scart cable.
AAV 1V 1 AAV 2V 2
ANTENNAANTENNA
ININ
(R) AUDIO (L)
AUDIO/
VIDEO
VV CC RR
TTVV BBaacckk
NOTE
!
GG
If both S-Video and VIDEO sockets have been connected to the S-VHS VCR simultaneousiy.
only the S-Video can be received.
NOTE
!
1
1
2
Connect the Euro scart socket of the VCR to the
AAVV11
Euro scart socket on the set.
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
Select
AAVV11
input source with using the
IINNPPUUTT
button on
the remote control.
- If connected to
AAVV22
Euro scart socket, select
AAVV22
input source.
1
2
3
Connect the S-VIDEO output of the VCR to the
SS--VViiddeeoo
input on the set. The picture quality is
improved; compared to normal composite (RCA cable) input.
Connect the audio outputs of the VCR to the
AAUUDDIIOO
input jacks on the set.
Insert a video tape into the VCR and press PLAY on the
VCR. (Refer to the VCR owner’s manual.)
Select
AAVV33
input source with using the
IINNPPUUTT
button
on the remote control.
1
2
4
3
When connecting with a Euro Scart
When connecting with an S-Video cable