User guide

Connecting to a CI Module
View the encrypted (pay) services in digital TV
mode.
USB IN
IN 3
H/P
USB IN
IN 3
R
Check this point as shown
and insert the CI Module.
y
Check if the CI module is inserted into the
PCMCIA card slotin the right direction. If
the module is not inserted properly, this can
cause damage to the TV and the PCMCIA
card slot.
NOTE
USB IN
IN 3
H/P
USB IN
USB IN
IN 3
R
or
Connecting to a USB
Connect a USB storage device such as s USB
flash memory, external hard drive or a USB
memory card reader to the TV and access the My
media menu to use various multimedia files.
USB IN
IN 3
H/P
USB IN
IN 3
R
Headphone connection
Transmits the headphone signal from the TV to an
external device. Connect the external device and
the TV with the headphone as shown on the follow-
ing illustration.
y
AUDIO menu items are disabled when
connecting a headphone.
y
W h e n c h a n g i n g AV M O D E w i t h a
headphone connected, the change is
applied to video but not to audio.
y
Optical Digital Audio Out is not available
when connecting a headphone.
y
Headphone impedance: 16 Ω
y
Max audio output of headphone: 10 mW
to 15 mW
y
Headphone jack size: 0.35 cm
NOTE
Data00 : High channel data
Data01 : Low channel data
ex. No. 47 -> 00 2F (2FH)
No. 394 -> 01 8A (18AH),
DTV No. 0 -> Don’t care
Data02 : 0x00 : Analogue Main
0x10 : DTV Main
0x20 : Radio
Channel data range
Analogue - Min: 00 to Max: 63 (0 to 99)
Digital - Min: 00 to Max: 3E7 (0 to 999)
The model and serial numbers of the TV is
located on the back of the TV
Re cord it below should you ever need
service.
Model
Serial