User guide

GB-71
PICTURE CONTROL
PICTURE SIZE ASPECT RATIO CONTROL
You can watch the screen in various picture formats; 16:9, Just Scan, Original, Full Wide, 4:3, 14:9, Zoom and Cinema
Zoom.
If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and
remain visible.
1
Q. MENU
Select Aspect Ratio.
• You can also adjust Aspect Ratio in the
PICTURE menu.
• By pressing OK button in 14:9, Zoom or
Cinema Zoom, you can adjust the zoom
size and position. After completing Zoom
Setting, the display goes back to Q.Menu.
2
Select the desired picture format.
• 16:9
The following selection will allow you to adjust the
picture horizontally, in linear proportion, to ll the entire
screen (useful for viewing 4:3 formatted DVDs).
• Original
When your TV receives a wide screen signal it will auto-
matically change to the picture format broadcast.
• Just Scan
Following Selection will lead to you view the picture of
best quality without loss of original picture in high resolu-
tion image.
Note : If there is noise in original Picture, you can see
the noise at the edge.
• Full Wide
When TV receives the wide screen signal,it will lead you
to adjust the picture horizontally or vertically, in a linear
proportion,to ll the entire screen fully.
PICTURE CONTROL