User guide

GB-15
EXTERNAL EQUIPMENT SETUP
To avoid damaging any equipment, never plug in any power cord until you have finished connecting all equipment.
This section on EXTERNAL EQUIPMENT SETUP mainly uses diagrams for 32LF73
**
model.
Image shown may differ from your TV.
HD RECEIVER SETUP
This TV can receive Digital RF/Cable signals without an external digital set-top box. However, if you do receive Digital
signals from a digital set-top box or other digital external device, refer to the diagram as shown below.
Connecting with a Component Cable
➊
Connect the video outputs (Y, PB, PR) of the digital set top box to the
COMPONENT IN VIDEO jacks on the TV.
➋
Connect the audio outputs of the digital set-top box to the
COMPONENT IN AUDIO jacks on the TV.
➌
Turn on the digital set-top box. (Refer to the owner’s manual for the
digital set-top box.)
➍
Select Component input source using the INPUT button on the
remote control.
Signal Component HDMI
480i/576i O X
480p/576p O O
720p/1080i O O
1080p
O
(50/60Hz only)
O
(24Hz/30Hz/50Hz/60Hz)
■
■
■
■
EXTERNAL EQUIPMENT SETUP
ANTENNA IN
(RGB)
2
3
1(DVI)
ANTENNA IN
(RGB)
2
3
1(DVI)
ANTENNA IN
(RGB)
2
3
1(DVI)
➊
➋