User guide

GB-30
WATCHING TV / PROGRAMME CONTROL
WATCHING TV / PROGRAMME CONTROL
TURNING ON THE TV
- When your TV is turned on, you will be able to use its features.
➊
Firstly, connect the power cord pushing it firmly home and check the main power on the TV.
At this stage, the TV switches to standby mode. (The power indicator on the TV illuminates red.)
➋
In standby mode to turn TV on, press the POWER, INPUT or P∧∨ (Programme Up/Down) button on the TV or press the POWER,
INPUT, P∧∨ or NUMBER button on the remote control and the TV will switch on.
Initial Setting
This step will guide you to easily set the optimal viewing mode and tune the available channels. When you turn on the TV for the first time
after purchase or if you perform Factory Reset in OPTION, initial setting will start automatically.
Language
Select your desired language.
Mode Setting
Select the mode for your environment. Each mode provides the optimal picture settings for each environment.
Select Home Use to use the TV in home. (default)
Select Store Demo to use the TV in store. Even if the user changes the picture setting, the TV will automatically
reset to initial settings after a certain period of time.
The mode (Home Use, Store Demo) can be changed in the OPTION > Mode Setting menu.
Country
Select the country.
Time Zone
Select the time zone.
Tuning Mode
Select the tuning mode to search the programmes you want.
Select Antenna to find all terrestrial programmes.
Select Satellite to find all satellite programmes.
Select Satellite & Antenna to find both satellite and terrestrial programmes.
Satellite and Satellite & Antenna lets you select Default Programmes or Update. Select Default
Programmes if you want to apply the default channels of the satellite. Select Update to search more channels.
NOTE:
If the initial setting menu disappears due to timeout without fully completing the channel searching procedure, you may
not have all of the channels available. In this case, you can use the tuning menus in SETUP to search for more channels.
Press the RETURN button to change the current OSD to the previous OSD.
For those countries without confirmed DTV broadcasting standards, some DTV features might not work, depending on
the DTV broadcasting environment.
Language, Country and Time Zone are not available in UK.
■
■
■
■
■
■
■
■
■
►
►
►
►
PROGRAMME SELECTION
➊
Press the P∧∨ (Programme Up/Down) or NUMBER buttons to select a programme number.
VOLUME ADJUSTMENT
➊
Press the + or - button to adjust the volume.
If you wish to switch the sound off, press the MUTE button.
You can cancel this function by pressing the MUTE, + , - or AV MODE button.