User guide

GB-21
EXTERNAL EQUIPMENT SETUP
VCR SETUP
To
avoid picture noise (interference), allow adequate distance between the VCR and TV.
Connecting with a RF Cable
➊
Connect the ANT OUT socket of the VCR to the ANTENNA IN socket on the TV.
➋
Connect the terrestrial antenna cable to the ANT IN socket of the VCR.
➌
Press the PLAY button on the VCR and match the appropriate channel between the TV and VCR for viewing.
Connecting with a RCA Cable
➊
Connect the AUDIO/VIDEO jacks between TV and VCR. Match the jack colours
(Video = yellow, Audio Left = white, and Audio Right = red)
➋
Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR
owner’s manual.)
➌
Select AV2 input source using the INPUT button on the remote control.
NOTE
If you have a mono VC R, connect the audio cable from the VCR to the AUDIO
L/MONO jack of the TV.
►
AV IN 2
L/MONO
R
AUDIO
VIDEO
USB IN
H/P
IN4
➊
Terrestrial
Wall jack
Terrestrial Antenna
➊
➋