User guide

GB-19
EXTERNAL EQUIPMENT SETUP
DVD SETUP
Connecting with a Component Cable
➊
Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT IN
VIDEO jacks on the TV.
➋
Connect the audio outputs of the DVD to the COMPONENT IN AUDIO jacks
on the TV.
➌
Turn on the DVD player, insert a DVD.
➍
Select Component input source using the INPUT button on the remote
control.
➎
Refer to the DVD player’s manual for operating instructions.
Component Input Ports
To achieve better picture quality, connect a DVD player to the component input
ports as shown below.
Component ports on the TV Y PB PR
Video output ports
on DVD player
Y
Y
Y
Y
PB
B-Y
Cb
Pb
PR
R-Y
Cr
Pr
Connecting the HDMI Cable
➊
Connect the HDMI output of the DVD to the HDMI/DVI IN 1, HDMI IN 2, HDMI IN 3 or
HDMI IN 4 jack on the TV.
➋
Select HDMI1, HDMI2, HDMI3 or HDMI4 input source using the INPUT button on the
remote control.
➌
Refer to the DVD player’s manual for operating instructions.
NOTE
The TV can receive video and audio signals simultaneously when using a HDMI cable.
If the DVD does not support Auto HDMI, you must set the output resolution appropriately.
Check that your HDMI cable is version 1.3 or higher. If the HDMI cables don’t support HDMI
version 1.3, flickering or no screen display can result. Please use the latest cables that
support at least HDMI version 1.3.
►
►
►
➊
➊
➋