User guide

INSTALLATION

HOW TO JOIN THE SET ASSEMBLY TO THE WALL TO PRO-

TECT THE SET FROM TUMBLING

■

Place the set close to the wall so that it doesn’t fall over if pushed backwards.

■

The instructions shown below detail a safer way to secure the set. This method fixes the set to the wall so

that it cannot fall over when pulled forward. This will prevent the set from causing injury or damage. Please

make sure that children don’t climb on or hang from the set.

Use a sturdy rope (not provided as parts of the set, must purchase separately) to tie the set. It is safer to tie

the rope so it becomes horizontal between the wall and the set.

Use the eye-bolts or set brackets/screws to fix the set to the wall as shown in the picture.

(If there are bolts already installed where the eye bolts need to be fitted, remove them first.)

Insert the eye-bolts or set brackets/screws and tighten them securely in the upper holes.

Secure the wall brackets with heavy duty screws (not provided as parts of the set, must purchase separately)

onto the wall. Match the height of the brackets that are mounted on the wall.

NOTE

When moving the set to another place undo the ropes first.

Use a set holder or a cabinet that is big and strong enough for the size and weight of the set.

To use the set safely make sure that the height of the bracket that is mounted on the wall is same as that

of the set.