ENGLISH DEUTSCH 4 2 P C 1 R R* 5 0 P C 1 R R* PORTUGUÊS Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
ACCESSORIES Ensure that the following accessories are included with your set. If an accessory is missing, please contact the dealer where you purchased the set. INPUT POWER DVD TV MULTIMEDIA VCR MODE CABLE STB AUDIO MARK LIVE TV EXIT MENU TIME SHIFT Owner's Manual PIP PR - PIP PR + SWAP PIP INPUT VOL PR MUTE TEXT SIZE POSITION INDEX TIME REVEAL HOLD SLEEP FAV ARC I/II LIST Q.
CONTENTS Accessories ............................................ 1 SPECIAL FUNCTIONS INTRODUCTION Controls / Connection Options . . . . . . . . . . . . . . . . . . 4-7 CONTENTS Remote Control Key Functions . . . . . . . . . . . . . . . . . . . . . 8-9 Home Menu .......................................... 10 INSTALLATION Unfolding The Base Stand ........................... 11 Basic connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
TV MENU On Screen Menus Selection and Adjustment . . . . . . . 47 Child Lock Fine tuning 48 .......................... 49 ........................................... 50 Assigning a station name ............................ ...................................... Favourite programme 72 ............................................ 73 ................................ Calling the programme table ........................ XD Demo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
INTRODUCTION CONTROLS This manual explains the features available on the 42PC1RR*, 50PC1RR* set. A This is a simplified representation of a front panel. The illustrations shown here may differ slightly from your set. INTRODUCTION Front Panel Controls INPUT MENU PR VOL OK Power/Standby Indicator • illuminates red in standby mode. • illuminates white when the set is switched on. • illuminates orange when manual recording in stanby mode.
CONNECTION OPTION This is the back panel of 42PC1RR*, 50PC1RR* sets. Back Connection Panel S-VIDEO R AUDIO L/MONO VIDEO S-VIDEO Input Connect S-Video out from an S-VIDEO device. AUDIO Input Connections are available for listening stereo sound from an external device. VIDEO Input Connects the video signal from a video device.
INTRODUCTION CONTROLS This is the front panel of models 3 2 L C 2 R R*, 3 7 L C 2 R R*, 4 2 L C 2 R R* sets. ■ This is a simplified representation of a front panel. Here shown may be somewhat different from your set. INTRODUCTION PR PROGRAMME Buttons VOL VOLUME Buttons OK OK Button MENU MENU Button INPUT INPUT Button R /I POWER Button Remote Control Sensor Power/Standby Indicator • illuminates red in standby mode.
CONNECTION OPTION This is the back panel of models 3 2 L C 2 R R*, 3 7 L C 2 R R*, 4 2 L C 2 R R* sets. Back Connection Panel R S-VIDEO VIDEO L/MONO AUDIO AUDIO Input Connections are available for listening stereo sound from an external device. AV IN 4 AC IN VIDEO Input Connects the video signal from a video device. 4 1 3 2 INTRODUCTION S-VIDEO Input Connect S-Video out from an SVIDEO device.
INTRODUCTION REMOTE CONTROL KEY FUNCTIONS When using the remote control, aim it at the remote control sensor on the set. POWER switches the set on from standby or off to standby. INPUT Selects the TV, AV, Component, RGB or HDMI/DVI modes. switches the set on from standby. INTRODUCTION MULTIMEDIA Selects the Component, RGB or HDMI/DVI modes. INPUT POWER DVD TV MULTIMEDIA VCR MODE CABLE STB AUDIO switches the set on from standby. MODE Switches the remote control mode to operate another device.
REMOTE CONTROL KEY FUNCTIONS IVE T V OK accepts your selection or displays the EXIT U MEN current mode. or F / G Adjusts menu settings. (TIME SHIFT) Selects menu item. D / E PIP Switches the sub picture on or off. TIME SHIFT Selects PIP , POP or DW modes. PIP P PIP PR +/- Selects a programme for the sub picture. R- PIP PR + PUT PIP IN SWAP SWAP Alternates between main and sub picture. VOL PIP INPUT Selects the input mode for the sub picture.
INTRODUCTION HOME MENU This menu is a contents guide. In Home Menu, you enter the Recorded list of DVR, Manual Rec, Scheduled List or TV Menu. INTRODUCTION INPUT POWER DVD TV MODE CABLE AUDIO Home MULTIMEDIA VCR STB Free Space MARK LIVE TV EXIT U MEN High 3h 19m Normal 5h 24m Recorded TV DVR p.29 OK TIME SHIFT TIME SHIFT PIP P R - PIP PR + SWAP VOL PUT PR MUTE 10 PIP IN TEXT Manual Rec. Scheduled List TV Menu TV Menu p.
INSTALLATION UNFOLDING THE BASE STAND (42PC1RR*) ■ This feature is not available for all models. A 3 INSTALLATION 1 2 4 B C ■ Place the set with the screen facing down on a cushion or soft cloth as shown in Figure 1. Before unfolding the stand, please make sure two locks (A) on the bottom of the stand are pushed outward. ■ Pull the stand out as shown above in Figures 2 ~ 3. After unfolding the stand, insert and tighten the screws in the holes (B) on the bottom of the stand.
INSTALLATION BASIC CONNECTION (42PC1RR *, 50PC1RR * ) ■ These models have two cable arrangement methods according to the stand type. Stand type 1 INSTALLATION Arrange the cables as shown picture. Stand type 2 1 Hold the C A B L E M A N A G E M E N T with both hands and push it as shown. CABLE MANAGEMENT 2 Connect the cables as necessary. To connect an additional equipment, see the E x t e r n a l e q u i p m e n t C o n n e c t i o n s section.
BASIC CONNECTION (32LC2RR*, 37LC2RR*, 42LC2RR*) 1 Connect the cables as necessary. After connecting the cables neatly, arrange the cables to the Cable Holder. 32LC2RR* 2 37/42LC2RR* Install the C A B L E M A N A G E M E N T as shown. 32LC2RR* 3 INSTALLATION To connect an additional equipment, see the CONNECTIONS & SETUP section. 37/42LC2RR* Bundle the cables using the supplied twister holder.
INSTALLATION HOW TO JOIN THE SET ASSEMBLY TO THE WALL TO PROTECT THE SET FROM TUMBLING ■ ■ Place the set close to the wall so that it doesn’t fall over if pushed backwards. The instructions shown below detail a safer way to secure the set. This method fixes the set to the wall so that it cannot fall over when pulled forward. This will prevent the set from causing injury or damage. Please make sure that children don’t climb on or hang from the set.
STAND INSTALLATION ■ ■ The set can be installed in various ways such as on a wall, or on a desktop etc. The set is designed to be mounted horizontally. GROUNDING Short-circuit Breaker INSTALLATION Power Supply Ensure that you connect the earth ground wire to prevent possible electric shock. If grounding methods are not possible, have a qualified electrician install a separate circuit breaker. Do not try to ground the unit by connecting it to telephone wires, lightening rods, or gas pipes.
CONNECTIONS & SETUP To prevent damage to the set, never plug in any power cords until you have finished connecting all equipment. ■ The illustrations shown here may differ slightly from your set. ■ ANTENNA CONNECTION For optimum picture quality, adjust antenna direction. ■ An antenna cable and converter are not supplied.
VCR SETUP To avoid picture noise (interference), leave an adequate distance between the VCR and TV. ■ Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. ■ When connecting with an antenna Connect the A N T O U T of the VCR to the A N T E N N A I N socket on the set. 2 Connect the antenna cable to the A N T I N antenna socket of the VCR.
( S-VIDEO VIDEO ) AUDIO CONNECTIONS & SETUP AV IN 3 VCR SETUP ( When connecting with a Euro Scart S-VIDEO VIDEO 1 Connect the Euro scart socket of the VCR to the A V 1 Euro scart socket on the set. 2 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 3 Select A V 1 input source with using the I N P U T button on the remote control. - If connected to A V 2 Euro scart socket, select A V 2 input source.
EXTERNAL EQUIPMENT CONNECTIONS 1 V I D E O jacks between Connect the A U D I O/V TV and external equipment. Match the jack colors (Video = yellow, Audio Left = white, and Audio Right = red). 2 Select A V 4 input source with using the I N P U T button on the remote control. - If connected to A V I N 3 input, select A V 3 input source. 3 Operate the corresponding external equipment. Refer to external equipment operating guide.
VIDEO VIDEO CONNECTIONS & SETUP COMPONENT IN COMPONENT IN VIDEO VIDEO AUDIO AUDIO DVD SETUP When connecting with a S-Video cable DVD (R) AUDIO (L) 2 CONNECTIONS & SETUP 1 Connect the S-VIDEO output of the DVD to the S - V I D E O input on the set. 2 Connect the audio outputs of the DVD to the A U D I O input jacks on the set. 3 Turn on the DVD player, insert a DVD. 4 Select A V 3 input source with using the I N P U T button on the remote control.
DVD SETUP When connecting with a component cable AV IN 4 1 DVD B R Connect the video outputs (Y, PB, PR) of the DVD to the C O M P O N E N T I N V I D E O jacks on the set. R AUDIO (R) AUDIO (L) L/MONO VIDEO 1 2 Connect the audio outputs of the DVD to the C O M P O N E N T I N A U D I O jacks on the set. 3 Turn on the DVD player, insert a DVD. 4 Select C o m p o n e n t input source with using the I N P U T button on the remote control.
COMPONENT IN AV IN 4 AUDIO VIDEO R AUDIO L/MONO CONNECTIONS & SETUP VIDEO STB(SET-TOP BOX) SETUP COMPONENT IN VIDEO ■ AUDIO This set can receive Digital Over-the-air/Cable signals without an external digital set-top box. However, if you do receive Digital signals from a digital set-top box or other digital external device, refer to the figure as shown below.
STB(SET-TOP BOX) SETUP When connecting with a component cable Digital Set-top Box B R Connect the video outputs (Y, PB, PR) of the digital set-top box to the C O M P O N E N T I N V I D E O jacks on the set. 2 Connect the audio output of the digital set-top box to the C O M P O N E N T I N A U D I O jacks on the set. 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.
CONNECTIONS & SETUP PC SETUP ■ This set provides Plug and Play capability, meaning that the PC adjusts automatically to the set's settings. When connecting with a D-sub 15 pin cable 1 Connect the RGB output of the PC to the R G B I N ( P C / D T V ) jack on the set. 2 Connect the audio outputs of the PC to the A U D I O ( R G B / D V I ) jack on the set. 3 Turn on the PC and the set. 4 Select R G B input source with using the I N P U T button on the remote control.
! NOTE G To G Connect the audio cable from the PC to the Audio input on the set. (Audio cables are not included with the set). G If using a sound card, adjust PC sound as required. G This set uses a VESA Plug and Play Solution. The set provides EDID data to the PC system with a DDC protocol. The PC adjusts automatically when using this set. G DDC protocol is preset for RGB (Analog RGB), HDMI (Digital RGB) mode. G If required, adjust the settings for Plug and Play functionally.
CONNECTIONS & SETUP Supported Display Resolution (RGB / HDMI mode) (32LC2RR *, 37LC2RR *, 42LC2RR *) CONNECTIONS & SETUP 26 Supported Display Resolution (RGB / HDMI mode) (42PC1RR *, 50PC1RR *) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) Resolution Horizontal Frequency(KHz) Vertical Frequency(Hz) 720x400 31.468 70.8 640x350 31.468 37.861 70.09 85.08 640x480 31.469 37.684 59.94 75.00 720x400 31.469 37.927 70.08 85.03 800x600 37.879 46.875 60.31 75.00 832x624 49.
BASIC OPERATION TURNING THE SET ON INPUT POWER Turning the set on DVD TV VCR MODE CABLE 1 First, connect the power cord. At this moment, the set switches to standby mode. ■ In standby mode to turn the set on, press the , I N P U T, P R D / E button on the set or press the P O W E R, I N P U T, M U L T I M E D I A, P R D / E, N U M B E R button on the remote control and then the set will switch on. STB AUDIO MARK Press the V O L D / E button to adjust the volume.
BASIC OPERATION TURNING THE SET ON INPUT POWER Programme selection DVD TV VCR MODE CABLE STB AUDIO 1 MULTIMEDIA Press the P R D / E or NUMBER button to select a programme number. MARK LIVE TV EXIT U MEN OK TIME SHIFT TIME SHIFT BASIC OPERATION On-Screen Menu Language Selection (option) PIP P R - The menus can be shown on the screen in the selected language. First select your language. VOL - PIP PR + Press the M E N U button and then use D / E button to select the SPECIAL menu.
SPECIAL FUNCTIONS DVR (Digital Video Recorder) TIMESHIFT DVD TV MODE CABLE AUDIO - This function allows the unit to automatically record live TV and make it available for reviewing at any time. - With Timeshift turned on, you may pause and rewind normal TV viewing at any time without missing any of the live broadcast.
SPECIAL FUNCTIONS DVR (Digital Video Recorder) PROGRESSING THE TIMESHIFT FUNCTION 1 1 2 3 4 The ‘Progress Bar’? After selecting the Timeshift On, press the O K button. This function indicates a possible DVR reshowing section ,a current on-screen and real live broad- As soon as Timeshift starts, a progress bar indicating the current recording status is displayed in the bottom of the screen. ■ Press the E X I T button to hide the ‘Progress Bar’ or press the O K button to display the 'Progress Bar'.
Progressing the Timeshift function, play DVD TV VCR MODE CABLE AUDIO STB - When in timeshift mode, the following options are available. MARK LIVE U MEN Indicates that the current broadcast and displayed video differ. OK TIME SHIFT TIME SHIFT PIP P Play TV EXIT R- PIP PR + SWAP PIP IN PUT Pause VOL PR MUTE TEXT Using the remote control You can shift playback to any point within the recorded program When playing, repeatedly, press the R E W( x50 -> x100 .
SPECIAL FUNCTIONS DVR (Digital Video Recorder) RECORDING - Use this function to record the program you are watching on the main screen. Instant Record This function records the currently displayed programme. 1 Select the programme you wish to record and then press the button. During recording is displayed. Use this feature to record up to 2 hours of programming. 2 If you want to stop recording, press the ■ ■ SPECIAL FUNCTIONS 3 button.
The extra recording time added to existing setting equals the final recording time. Recording time 00:00~02:00 (0 4 After adjusting the recording time, select O K. The Status bar will be displayed. 00:00 min recorded) No change Total recording duration 3 0:00 / 2:00 Elapsed recording time ■ 5 Press the E X I T button to hide the Status bar. Press the O K button to display the Status bar. Recording stops when the selected duration is reached or when you press the button.
SPECIAL FUNCTIONS DVR (Digital Video Recorder) SHIFT SHIFT WATCHING & RECORD PIP P - While recording, you can change programmes or inputs without disturbing the recording. The broadcast being recorded can be shown in the lower-right corner of the main screen. PUT R- PIP PR + SWAP VOL PIP IN PR MUTE TEXT LIST Q.VIEW SIZE POSITION INDEX TIME REVEAL HOLD SLEEP FAV ARC I/II ? PIP 1 After starting an Instant Record or Reserved Record, change the programme or input.
TV RECORDED TV VCR MODE CABLE AUDIO STB MARK - You can view the recorded program list at a glance. - This function is also available in DVR menu. LIVE TV EXIT U MEN OK 1 Press the button to display H O M E menu. Use the D or E button to select Recorded TV and then use the O K or G button.
SPECIAL FUNCTIONS 3 DVR (Digital Video Recorder) Use button to navigate the appropriate thumbnail photo, then press the O K button to open the Pop-up Menu. Free Space High 3h 19m Normal 5h 24m Play : Begin playback of the selected recording. Mark All : mark all recordings on the screen. Unmark All : Change marked recordings to unmarked recordings. Delete : Delete the selected recording. Rename : Edit the recorded program title. Cancel : Close the Pop-up Menu.
USING THE REMOTE CONTROL You can shift playback to any point within playing the recorded program. When playing, repeatedly, press the R E W( x50 -> x100 -> . MARK repeatedly, press the F F( -> x50 -> x100 . ■ ) button to speed up x2 -> -> x2 x5 x5 -> -> x10 x10 Pressing these buttons repeatedly increases the fast forward/reverse speed. Press the LIVE MARK ) button to speed up or ■ Press the ■ Pressing the LIVE TV button to move back and forth within the current program.
SPECIAL FUNCTIONS DVR (Digital Video Recorder) MANUAL RECORDING MARK LIVE - This function is easy to register to reserved recording. - This function is available to use in DVR menu. - When Manual Recording, it’s stored the default sound of the set. TV EXIT U MEN OK TIME SHIFT TIME SHIFT PIP P R- PIP PR + SWAP PIP IN VOL PUT PR MUTE TEXT Home 1 Press the button to display H o m e menu. Use the D or E button to select the M a n u a l R e c and then use the O K or G button.
SCHEDULED LIST MARK LIVE TV EXIT U MEN - You can store up to 8 programmes. - This function is available to use in DVR menu. OK TIME SHIFT TIME SHIFT PIP P R- PIP PR + SWAP PIP IN PUT O Home 1 Press the button to display H o m e menu. Use the D or E button to select the Scheduled List and then use the O K or G button. Free Space High 3h 19m Normal 5h 24m Recorded TV Manual Rec. 2 Scheduled List screen is displayed as shown below. Use the button to select recorded programme.
SPECIAL FUNCTIONS DVR (Digital Video Recorder) FORMAT HARD DISK MARK LIVE TV EXIT U MEN OK TIME SHIFT TIME SHIFT PIP P R- PIP PR + SWAP VOL SOUNDO Manual Recording TIMEO Scheduled List SPECIALO Video Quality SCREENO Format Hard Disk Press the G button and then use D / E button to select Format Hard Disk. 3 Press the G button to start Format Hard Disk. TEXT STATIONO Timeshift PICTUREO Recorded TV Press the M E N U button and then use D / E button to select the D V R menu.
SPECIAL FUNCTIONS PIP / POP / Twin Picture PIP (PICTURE-IN-PICTURE) FEATURE MARK PIP lets you view 2 different inputs (sources) on your set screen at the same time. One source will be large, and the other source will show a smaller inset image. It’s not available to use this function in TELETEXT mode. Twin Picture mode splits the screen into two images, allowing two picture sources to be shown on the set screen at the same time. Each source is given half the screen.
SPECIAL FUNCTIONS PIP / POP / Twin Picture PROGRAMME SELECTION FOR SUB PICTURE 1 Press the PIP PR +/- button to select a programme for the sub picture. ADJUSTING THE SCREEN FOR THE PIP 1 In TV or AV modes for the main picture and RGB[PC] for the sub picture, you can use Auto config and Manual config to adjust the screen of the sub picture.
SWAPPING BETWEEN MAIN AND SUB PICTURES 1 Press the S W A P button to exchange the main and sub pictures. SWAP PIP Main Picture Sub Picture SWAP DW1 Main Picture Sub Picture DW2 Main Picture Sub Picture SPECIAL FUNCTIONS SWAP POP (PICTURE-OUT-OF-PICTURE: CHANNEL SCAN) 1 Use POP to search the programmes of all the memorized channels one-by-one on the 3 PIP screen display, (while the main picture source remains the current programme).
SPECIAL FUNCTIONS Teletext - Teletext (or TOP text) is an optional function, therefore only the set with the teletext system can receive the teletext broadcast. - Teletext is a free service broadcast by most TV stations which gives up-to-the-minute information on news, weather, television programmes, share prices and many other topics. - The teletext decoder of this set can support the SIMPLE, TOP and FASTEXT systems.
SIMPLE TEXT (OPTION) A Page selection 1 Enter the desired page number as a three digit number with the NUMBER buttons. If during selection you press a wrong number, you must complete the three digit number and then re-enter the correct page number. 2 The P R D / E button can be used to select the preceding or following page. TOP TEXT (OPTION) - The user guide displays four fields-red, green, yellow and blue at the bottom of the screen.
SPECIAL FUNCTIONS Teletext SPECIAL TELETEXT FUNCTIONS REVEAL Press this button to display concealed information, such as solutions of riddles or puzzles. Press this button again to remove the information from the display. SIZE Selects double height text. Press this button to enlarge the top half of the page. Press this button again to enlarge the bottom half of the page. Press this button again to return to the normal display.
TV MENU ON SCREEN MENUS SELECTION AND ADJUSTMENT Your set's OSD (On Screen Display) may differ slightly from what is shown in this manual. 1 Press the M E N U button and then D / E button to display each menu. 2 Press the G button and then D / E button to select a menu item. 3 Change the setting of an item in the sub or pull-down menu with F / G button. You can move to the higher level menu by pressing the O K or M E N U button.
TV MENU Setting up TV stations MODE AUTO PROGRAMME TUNING CABLE AUDIO STB MARK - All stations that can be received are stored by this method. It is recommended that you use auto programme during installation of this set. - This function is not available when recording a programme. LIVE TV EXIT U MEN OK TIME SHIFT TIME SHIFT PIP P R- PIP PR + SWAP VOL 1 Press the M E N U button and then D / STATION menu. 2 Press the G button and then D / programme.
LIVE MANUAL PROGRAMME TUNING TV EXIT U MEN OK TIME SHIFT TIME SHIFT - Manual programme lets you manually tune and arrange the stations in whatever order you desire. Also you can assign a station name with five characters to each programme number. PIP P R- PIP PR + SWAP VOL MUTE TEXT LIST Press the M E N U button and then D / the STATION menu. 2 Press the G button and then D / Manual programme. E E T PR - It’s not available to use this function in Timeshift On mode.
TV MENU Setting up TV stations MODE FINE TUNING AUDIO CABLE STB MARK - Normally fine tuning is only necessary if reception is poor. LIVE TV EXIT U MEN OK TIME SHIFT TIME SHIFT PIP P R- PIP PR + SWAP VOL 1 Press the M E N U button and then D / STATION menu. E PIP IN PUT PR STATION{ Auto programme PICTUREO Manual programme button to select the SOUNDO Programme edit TIMEO Favourite programme SPECIALO 2 Press the G button and then D / programme.
MODE ASSIGNING A STATION NAME AUDIO CABLE MARK - You can assign a station name with five characters to each programme number. STB LIVE TV EXIT U MEN OK TIME SHIFT TIME SHIFT PIP P R- PIP PR + SWAP VOL 1 Press the M E N U button and then D / STATION menu. 2 Press the G button and then D / programme.
TV MENU Setting up TV stations MODE BOOSTER (OPTION) AUDIO CABLE STB MARK - In some models, B o o s t e r is an optional function. Only a set with B o o s t e r can perform this function. - If the reception is poor at the fringe area of TV signal, select B o o s t e r to O n. PIP P TIME SHIFT R- PIP PR + SWAP VOL Press the M E N U button and then D / STATION menu.
E TV PROGRAMME EDIT EXIT U MEN OK - This function enables you to delete or skip the stored programmes. Also you can move some stations to other programme numbers or copy a blank station data into the selected programme number. - It’s not available to use this function on recording programme. TIME SHIFT TIME SHIFT PIP P PUT R- PIP PR + SWAP PIP IN VOL PR MUTE 1 Press the M E N U button and then D / STATION menu. E 2 Press the G button and then D / Programme edit.
TV MENU Setting up TV stations TV FAVOURITE PROGRAMME EXIT U MEN OK TIME SHIFT TIME SHIFT This function lets you select your favourite programmes directly. Repeatedly press the F A V button to select stored favourite programmes. PIP P R- T PIP PR + SWAP PU PIP IN VOL PR MUTE 1 Press the M E N U button and then D / the STATION menu. 2 Press the G button and then D / Favourite programme. E TEXT button to select LIST E button to select Q.
XIT MEN CALLING THE PROGRAMME TABLE OK TIME SHIFT TIME SHIFT - You can check the programmes stored in the memory by displaying the programme table. PIP P R- PIP PR + SWAP PIP IN VOL PR MUTE A Displaying programme table Press the L I S T button to display the Programme table menu. The programme table appears on the screen. TEXT LIST SIZE PUT Q.VIEW POSITION INDEX TIME ! NOTE a. You may find some blue highlighted programmes shown. They have been set up in the programme edit mode. b.
TV MENU Picture Menu Options CABLE AUDIO PSM (PICTURE STATUS MEMORY) STB MARK LIVE TV EXIT U MEN OK TIME SHIFT TIME SHIFT PIP P P UT R- PIP PR + SWAP VOL PR MUTE 1 Press the M E N U button and then D / the PICTURE menu. E PIP IN TEXT button to select STATIONO PSM PICTURE{ CSM 2 Press the G button and then D / E SOUNDO button to select PSM. TIMEO ACM SPECIALO Contrast 3 Press the G button and then D / E button to select Dynamic, Standard, Mild or User.
CABLE AUDIO CSM (COLOUR STATUS MEMORY) MARK - To initialize values (reset to default settings), select the N o r m a l option. TIME SHIFT PIP P P UT R- PIP PR + SWAP VOL 2 Press the G button and then D / 3 Press the G button and then use D / the desired colour temperature. E E PIP IN PR MUTE Press the M E N U button and then D / the PICTURE menu. TV OK TIME SHIFT - Choose one of three automatic colour adjustments.
TV MENU Picture Menu Options CABLE AUDIO MANUAL COLOUR TEMPERATURE CONTROL (CSM - USER OPTION) MARK - You can adjust red, green, blue to any colour temperature you prefer. PIP P TIME SHIFT R- PIP PR + SWAP VOL 2 Press the G button and then D / E PUT TEXT button to select button to select CSM. 3 Press the G button and then D / 4 Press the G button and then use D / make appropriate adjustments.
FUNCTION CABLE AUDIO MARK - XD is LG Electronic's unique picture improving technology to display a real HD source through an advanced digital signal processing algorithm. - You can enjoy the vivid and hi-definition picture with LG’s Excellent Digital Reality processor technology. - It’s not available to use this function in RGB[PC] or HDMI[PC] modes. - When selecting picture options (Dynamic, Standard and Mild) in PICTURE menu, XD is automatically changed to On.
TV MENU Picture Menu Options CABLE AUDIO sRGB FUNCTION MARK TIME SHIFT PIP P R- PIP PR + SWAP 2 Press the G button and then D / 3 Press the G button and then D / or Off. E E E PUT TEXT button to select button to select sRGB. STATIONO PSM PICTURE{ CSM button to select On SOUNDO TIMEO sRGB SPECIALO Contrast 4 PIP IN PR MUTE Press the M E N U button and then D / the PICTURE menu.
ACM (ACTIVE COLOUR MANAGEMENT) CABLE AUDIO MARK LIVE OK TIME SHIFT TIME SHIFT PIP P R- PIP PR + SWAP PIP IN VOL Press the M E N U button and then D / the PICTURE menu. 2 Press the G button and then D / 3 E E TEXT button to select button to select ACM. Press the G button and then use F / appropriate adjustments.
TV MENU Picture Menu Options MANUAL PICTURE CONTROL CABLE AUDIO MARK TIME SHIFT PIP P R- PIP PR + SWAP 2 Press the G button and then use D / the desired picture option. E Press the G button and then use F / appropriate adjustments. G 3 4 E PIP IN PUT PR MUTE Press the M E N U button and then D / the PICTURE menu. TV OK TIME SHIFT VOL 1 LIVE EXIT U MEN - You can adjust picture contrast, brightness, colour, sharpness and tint (NTSC input only) to the levels you prefer.
Sound Menu Options TV MENU SSM (SOUND STATUS MEMORY) CABLE AUDIO STB MARK - This function lets you enjoy the best sound without any special adjustment because the set automatically selects the appropriate sound option based on the program content. - When adjusting sound options (treble and bass) manually, SSM is automatically changed to User. - The sound SRS TSXT, Flat, Music, Movie and Sports are programmed for good sound reproduction at the factory and cannot be changed.
TV MENU Sound Menu Options AVL (AUTO VOLUME LEVELER) CABLE AUDIO MARK - AVL automatically keeps on an equal volume level even if you change programmes. STB LIVE TV EXIT U MEN OK TIME SHIFT TIME SHIFT PIP P R- PIP PR + SWAP VOL Press the M E N U button and then D / the SOUND menu. E Press the G button and then D / 3 Press the G button and then D / 4 Press the E X I T button to return to normal TV viewing.
ADJUSTING SOUND CONTROL CABLE AUDIO MARK STB LIVE TV EXIT U MEN OK TIME SHIFT TIME SHIFT PIP P 1 2 3 4 Press the M E N U button and then D / the SOUND menu. E Press the G button and then use D / the desired sound item. E Press the G button and then use F / appropriate adjustments.
TV MENU Sound Menu Options STEREO/DUAL RECEPTION VOL PR MUTE TEXT - When a programme is selected, the sound information for the station appears after the programme number and station name disappear. LIST Q.VIEW SIZE POSITION INDEX TIME REVEAL HOLD SLEEP FAV ARC I/II ? PIP 1 On Screen Display Press the I/II button to received broadcast state.
NICAM RECEPTION (OPTION) If the set is equipped with the receiver for NICAM reception, the high quality NICAM (Near Instantaneous Companding Audio Multiplex) digital sound can be received. Sound output can be selected according to the type of received broadcast as follows by pressing the I / I I button repeatedly. 1 When NICAM mono is received, you can select NICAM MONO or FM MONO. 2 When NICAM stereo is received, you can select NICAM STEREO or FM MONO. If the stereo signal is weak, switch to FM mono.
TV MENU Time Menu Options SETTING THE CLOCK AUDIO CABLE STB MARK - If current time setting is erased by a power failure or the set is unplugged, reset the clock. LIVE TV EXIT U MEN OK TIME SHIFT TIME SHIFT PIP P R- PUT PIP PR + SWAP PIP IN VOL PR MUTE 1 Press the MENU button and then use D / select the TIME menu. E TEXT STATIONO Clock PICTUREO Off time button to SOUNDO On time TIME{ Auto sleep SPECIALO 2 3 Press the G button and then use D / Clock.
SETTING THE ON/OFF TIME CABLE AUDIO STB MARK - Time function operates only if current time has been already set. - Off Time function overrides On Time function if they are set to the same time. - The set must be in standby mode for the On Time to work. LIVE TV EXIT U MEN OK TIME SHIFT TIME SHIFT PIP P R- PIP PR + PIP IN SWAP VOL PR MUTE 1 Press the MENU button and then use D / select the TIME menu. 2 Press the G button and then use D / Off time or On time.
TV MENU Time Menu Options TV AUTO SLEEP EXIT U MEN OK TIME SHIFT TIME SHIFT If set to on and there is no input signal, the set turns off automatically after 10 minutes. PIP P R- PIP PR + SWAP VOL Press the MENU button and then use D / select the TIME menu. 2 Press the G button and then use D / Auto sleep. E Press the G button and then use D / On or Off.
TV MENU Special Menu Options CHILD LOCK INPUT POWER DVD TV MODE CABLE AUDIO - The set can be set so that the remote control handset is needed to control it. - This feature can be used to prevent unauthorized viewing. MARK M MULTIMEDIA VCR STB LIVE TV EXIT ENU OK TIME SHIFT TIME SHIFT PR - PIP PR + SWAP VOL PR MUTE TEXT POSITION INDEX LIST SIZE 1 Press the MENU button and then use D / select the SPECIAL menu. 2 Press the G button and then use D / Child lock.
TV MENU Special Menu Options AUDIO ISM (IMAGE STICKING MINIMIZATION) METHOD CABLE STB MARK - A frozen of still picture from a PC/video game displayed on the screen for prolonged periods will result in a ghost image remaining even when you change the image. Avoid allowing a fixed image to remain on the set's screen for a long period of time. - It’s not available to use this function in LCD TV models.
AUDIO LOW POWER CABLE STB MARK - This is the function to reduce the power consumption of the set. - It’s not available to use this function in LCD TV models. OK TIME SHIFT TIME SHIFT PIP P 1 2 3 4 Press the MENU button and then use D / select the SPECIAL menu. Press the G button and then use D / Low power. E Press the G button and then use D / On or Off.
TV MENU Special Menu Options AUDIO INDEX (OPTION) CABLE MARK - You can switch FRONT DISPLAY on or off. STB LIVE TV EXIT U MEN OK TIME SHIFT TIME SHIFT PIP P R- P UT PIP PR + SWAP VOL PR MUTE 1 2 3 Press the MENU button and then use D / select the SPECIAL menu. Press the G button and then use D / Index. E Press the G button and then use D / On or Off.
TV MENU Screen Menu Options CABLE AUDIO AUTO CONFIG. STB MARK - Automatically adjusts picture position and minimizes image shaking. - Although the image is still not correct, your set is functioning properly but needs further adjustment. - The Auto config. functions don’t need to be run for HDMI/DVI mode. - This function works in the following mode : RGB[PC] - This function is for the automatic adjustment of the screen position, clock, and phase.
TV MENU Screen Menu Options CABLE AUDIO MANUAL CONFIG. MARK - If the picture isn’t clear after auto adjustment and especially if characters are still trembling, adjust the picture phase manually. - To correct the screen size, adjust Clock. - This function works in the following mode: RGB[PC], RGB[DTV], HDMI[DTV], COMPONENT[DTV] mode only - It’s not available to use Phase, Clock function in RGB[DTV], HDMI[DTV], COMPONENT[DTV] mode.
CABLE AUDIO SELECTING WIDE XGA/VGA MODE STB MARK - To see a normal picture, match the resolution of RGB mode and selection of VGA/XGA mode. - In some models, it’s not available for selecting VGA mode. - This function works in the following mode : RGB[PC] LIVE OK TIME SHIFT TIME SHIFT PIP P R- P UT PIP PR + SWAP VOL Press the MENU button and then use D / select the SCREEN menu. E PIP IN PR MUTE 1 TV EXIT U MEN TEXT STATIONO Auto config. PICTUREO Manual config.
TV MENU Screen Menu Options CABLE AUDIO SETTING PICTURE FORMAT STB MARK - You can watch the screen in various picture formats; Spectacle, Full (option), Original, 4:3, 16:9 (Wide), 14:9 and Zoom. - If a fixed image is displayed on the screen for a long time, that fixed image may become imprinted on the screen and remain visible. - You can only select 4:3 and 16:9 (Wide) in RGB[PC], HDMI[PC] mode only. - You can only select 4:3, 16:9 (Wide) and Zoom in RGB[DTV], HDMI[DTV], Component [DTV] mode only.
CABLE AUDIO CINEMA MARK - When you watch the movie, this function adjusts the set to the best picture appearance. - This function works in the following mode: TV, AV1, AV2, S-VIDEO2, AV3, AV4 or COMPONENT (480i/576i). TIME SHIFT R- PIP PR + SWAP PIP IN PUT PR MUTE E TV OK TIME SHIFT VOL Press the MENU button and then D / the SCREEN menu. LIVE EXIT U MEN PIP P 1 STB TEXT STATIONO Auto config. PICTUREO Manual config.
TV MENU Screen Menu Options CABLE AUDIO NR (NOISE REDUCTION) MARK - You can select 3D NR or MPEG NR to reduce the picture noise which may appear on the screen during watching the set. - This function is not available for use in RGB[PC], HDMI[PC] mode. - 3D NR is not available for use in RGB, HDMI and Component[DTV] mode. 1 Press the MENU button and then use D / select the SCREEN menu.
APPENDIX PROGRAMMING THE REMOTE The remote is a multi-brand or a universal remote. It can be programmed to operate most remote-controllable devices of other manufacturers. Note that the remote may not control all models of other brands. Programming a code into a remote mode 1 To find out whether your remote can operate the device without programming, turn on the device such as a VCR and press the corresponding mode button on the remote. After that, press the POWER button.
APPENDIX PROGRAMMING CODES VCRs Brand AIWA AKAI APPENDIX 82 Codes 034 016 125 AMPRO 072 ANAM 031 AUDIO DYNAMICS 012 BROKSONIC 035 CANON 028 CAPEHART 108 CRAIG 003 CURTIS MATHES 031 DAEWOO 005 065 112 DAYTRON 108 DBX 012 DYNATECH 034 ELECTROHOME 059 EMERSON 006 029 036 129 FISHER 003 FUNAI 034 GE 031 107 GO VIDEO 132 HARMAN KARDON HITACHI 004 043 INSTANTREPLAY 031 JCL 031 JCPENNY 012 040 JENSEN 043 JVC 012 048 130 KENWOOD 014 047 LG (GOLDSTAR) 001 101 LLOYD 034 LXI 003 017 MAGIN 040 Brand Codes Brand
APPENDIX PROGRAMMING CODES CATV Brand ABC Codes 003 046 AJIN 112 ANTRONIK 014 ARCHER 005 CABLE STAR 026 CENTURION 092 CENTURY 007 CITIZEN 007 COLOUR VOICE 065 COMBANO 080 COMTRONICS 019 DIAMOND 023 EAGLE 020 EASTERN 057 ELECTRICORD 032 GE 072 GEMINI 008 GI 052 GOLDEN CHANNEL 030 HAMLIN 049 HITACHI 052 HOSPITALITY 070 JERROLD 002 009 074 004 039 042 052 053 007 014 024 090 081 030 030 040 062 066 022 025 054 074 050 055 055 077 003 004 008 010 052 069 Brand LG (GOLDSTAR) M-NET MACOM MAGNAVOX MEMOREX M
APPENDIX HDSTB Brand Codes ALPHASTAR DSR AMPLICA BIRDVIEW CHANNEL MASTER 123 050 051 013 036 CHAPARRAL 008 CITOH 054 CURTIS MATHES 050 DRAKE 005 011 141 DX ANTENNA 024 ECHOSTAR 038 093 097 122 ELECTRO HOME 089 EUROPLUS 114 FUJITSU 017 133 GENERAL INSTRUMENT 003 031 HITACHI 139 126 129 014 015 018 055 009 012 077 145 006 007 010 052 112 116 046 040 094 098 056 057 095 099 076 058 096 100 021 022 027 134 004 016 029 059 101 140 Codes HOUSTON TRACKER 033 057 HUGHES 068 JANIEL 060 JERROLD 061 KATHREIN
APPENDIX PROGRAMMING CODES Audio Brand AIWA Codes 028 070 096 129 139 229 Codes NAD LOTTE 045 014 100 175 179 201 214 238 103 111 002 034 097 049 104 107 046 013 048 133 158 007 142 104 026 039 065 115 113 080 092 103 124 193 204 011 014 017 023 106 189 216 235 236 053 060 084 148 198 221 075 130 143 099 021 107 191 212 035 024 108 192 239 188 029 110 210 222 058 079 149 153 158 207 226 062 095 150 154 159 222 227 069 121 151 155 160 224 243 013 186 050 171 222 141 187 067 089 197 206 LXI MAG
APPENDIX TROUBLESHOOTING CHECKLIST The operation does not work normally. Check to see if there is any object between the set and the remote control causing an obstruction. ■ Are batteries installed with correct polarity (+ to +, - to -)? ■ Is the correct remote operating mode set: TV, VCR etc.? ■ Are the batteries flat? ■ The remote control doesn’t work Is the sleep timer set? ■ Check the power control settings. Power interrupted? ■ Auto off is activated and no signal is being received.
APPENDIX TROUBLESHOOTING CHECKLIST The audio function does not work. Press the VOL D / E button. Sound muted? Press MUTE button. ■ Try another programme. The problem may be with the broadcast. ■ Are the audio cables installed properly? ■ ■ Picture OK & No sound No output from one of the speakers Unusual sound from inside the set ■ Adjust Balance in menu option.
APPENDIX MAINTENANCE Early malfunctions can be prevented. Careful and regular cleaning can extend the lifetime of your new set. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1 Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen.
APPENDIX PRODUCT SPECIFICATIONS 42PC1RR* 50PC1RR* 42PC1RR-ZL 50PC1RR-ZL 1129.0 x 748.5 x 380.0 mm 1302.6 x 872 x 355.8 mm 44.5 x 29.5 x 15.0 inches 51.2 x 34.3 x 14 inches 1129.0 x 695.0 x 108.9 mm 44.5 x 27.4 x 4.3 inches 1302.6 x 810x 108.7 mm 29.1kg/64.2 lbs 25.6kg/56.5 lbs 51.7 kg/114.0 lbs AC100-240V~ 50/60Hz 3.
APPENDIX PRODUCT SPECIFICATIONS 32LC2RR* 37LC2RR* 42LC2RR* 32LC2RR-ZL 37LC2RR-ZL 42LC2RR-ZL 811.0 x 630.0 x 235.0 mm 31.9 x 24.8 x 9.3 inches 944.0 x 729 x 286 mm 37.1 x 28.7 x 11.2 inches 1054 x 813 x286 mm 41.4 x 32x 11.2 inches MODELS with stand Dimensions (Width x Height x Depth) without stand Weight including stand excluding stand 150W Operating Temperature Operating Humidity Storage Temperature Storage Humidity ■ APPENDIX 90 22.7 kg / 50.1 lbs 19.3 kg / 42.6 lbs 944.0 x 659.3 x 129.
