User guide

9
ENG
ENGLISH
ASSEMBLING AND PREPARING

Oncethepinisremoved,itisnotnecessary
tore-insertittoadjusttheheight.
Adjusting the stand height

Donotputyourfingersor
handbetweenthescreen
andthebase(chassis)when
adjustingthescreen'sheight.
CAUTION
WARNING

120.0 mm
1
Place the monitor mounted on the stand base
in an upright position.
2
Remove the tape attached at the bottom rear
of the stand body, then pull out the locking
pin.
3
The height can be adjusted up to 120 mm.
Tape
Locking Pin
Stand Body