LCD TV OWNER’S MANUAL MODEL: 23LX1RV Internet Home Page : http://www.lge.com http://www.lg.ca Please read this manual carefully before operating your set. Retain it for future reference. Record model number and serial number of the set. See the label attached on the back cover and quote this information to your dealer when you require service.
Warning CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN WARNING: TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL. The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
Safety Instructions WARNING : To Reduce The Risk Of Fire Or Electric Shock, Do Not Expose This Apparatus To Rain Or Moisture. Apparatus shall not be exposed to dripping or splashing and no objects filled with liquids, such as vases, shall be placed on the apparatus. IMPORTANT SAFETY INSTRUCTIONS 1. Read these instructions. Ow ner's Man ual 2. Keep these instructions. 8.
12. Use only with a cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart / apparatus combination to avoid injury from tip-over. 14. Refer all servicing to qualified service personnel.
Accessories Ensure that the following accessories are included with your TV. If any accessory is missing, please contact the dealer from where you purchased the product. TV /AV MUL TIME DIA PO W VID EO ST OP P AR ER FC R SC AN OP EN /CL OS E IT EX IP SK DIS EN TE R C PL AUDI AY O PA US E/S TE P S MT PEAT RE SC AN CC O DI AU SKI ME NU C ME NU TI VO L TL TE RK ER SE AR CH PR CL RA M N 9 EA 1.5V 1.
Contents Introduction 5 8 9 10 Accessories Controls Connection Options Remote Control Installation 13 14 14 15 16 17 18 19 20 20 Basic Connection External Equipment Connections Antenna Connection VCR Setup External AV Source Setup External DVD Setup DVD Output Setup DTV Setup PC Setup Power Cord Connection TV 21 21 21 21 22 Turning On/Off the TV Volume Adjustment Programme selection On screen language selection How to adjust the OSD sreen Setting up TV stations 23 24 Memorizing the Channels with E
Contents PC menu options 37 37 38 38 H-Position / V-Position Clock / Phase Reset 39 41 41 41 42 42 43 43 43 44 44 45 45 46 46 47 47 47 48 49 Notes on Discs Language Menu Language Disc Audio / Disc Subtitle / Disc Menu Display Progressive Scan Audio Dolby Digital / DTS / MPEG Sample Freq. (Frequency) DRC (Dynamic Range Control) Vocal Lock Rating Password (Security Code) Area Code OTHERS PBC AUTO PLAY B.L.
Introduction Controls - This is a simplified representation of front panel. - Here shown may be somewhat different from your TV. CH VOL P G) MENU MENU Button TVvVIDEO Button S SC KIP AN / AY S SC KIP AN / PL ST O Volume (F / Buttons ENTER Button TV O C PE LO N SE / / E) ENTER VIDEO DVD / CD PLAYER Channel (D Buttons ON/OFF Button Remote Control Sensor Power/Standby Indicator Illuminates red in standby mode, illuminates green when the set is switched on.
Introduction Connection Options S-VIDEO INPUT COMPONENT2 IN (480i) AUDIO INPUT 1 PC SOUND INPUT DVI INPUT (RGB INPUT) UPGRADE PORT COMPONENT1 (DVD/DTV IN) ((480i/480p/720p/1080i), Audio) REMOTE CONTROL JACK AC INPUT VIDEO ANTENNA INPUT AUDIO/VIDEO INPUT DIGITAL SOUND OUT DVD Output (Video) DVD Output (Audio) OPTICAL (Digital Sound Output) 9
Remote Control OPEN/CLOSE POWER TV/AV FCR EDIA MULTIM AUDIO VIDEO STOP CC AUDIO MTS PLAY PAUSE/STEP REP EAT POWER Switches the set On from standby or Off to standby. TV/AV • Selects: TV, Video, S-Video, DVD, Component 1, Component 2, or PC mode. • Clears the menu from the screen. • Switches the set On from standby. OPEN/CLOSE Opens or closes the disc tray. SCAN SCAN SKIP ARC MENU SKIP EXIT MULTIMEDIA • Selects: TV, DVD, Component 1, Component 2 or PC mode.
Introduction Remote Control OPEN/CLOSE POWER TV/AV FCR EDIA MULTIM AUDIO VIDEO STOP MENU Selects a menu. ARC Selects your desired picture format. (Refer to p.26) CC AUDIO MTS EXIT Exits from each mode. PLAY PAUSE/STEP REP EAT SCAN SCAN SKIP ARC MENU D / E / F / G (up / down / left / right) Selects or adjusts an item in the menu. SKIP ENTER Accepts your selection or displays the current mode. EXIT DISC MENU Accesses menu on a DVD disc. (Refer to p.
1 2 3 4 5 6 7 8 9 SLEEP 0 CLEAR A-B RANDOM ANGLE SUB_T MARKER SEARCH PROGRAM ZOOM A-B Repeat sequence. (Refer to p.54) RANDOM Plays chapters or tracks in random order. (Refer to p.54) ANGLE Selects a DVD camera angle if available. (Refer to p.54) SUB_T (SUBTITLE) Selects a subtitle language. (Refer to p.55) MARKER Marks any point during playback. (Refer to p.55) SEARCH Displays MARKER SEARCH menu. (Refer to p.55) PROGRAM Places a track on the program list. (Refer to p.
Installation Basic Connection 1 Pull the back cover backside while pushing the two tabs and then lift it up. 2 Connect the cables as necessary. To connect an additional equipment, see the External equipment Connections section. 3 Align the holes on the TV back panel with the protuberances on the back cover and insert. - Cable Arranagement Pull the cables through the hole on the set and bundle the cables using the supplied twister holder.
External Equipment Connections To prevent the equipment damage, never plug in any power cords until you have finished connecting all equipment. Antenna Connection - Antenna or Cable Service without a Cable Box Connection. - For optimum picture quality, adjust antenna direction if needed. Multi-family Dwellings/Apartments (Connect to wall antenna socket) Wall Antenna Socket RF Coaxial Wire (75 ohm) VHF Antenna Turn clockwise to tighten.
Installation External Equipment Connections VCR Setup - To avoid picture noise (interference), leave an adequate distance between the VCR and TV. - Typically a frozen still picture from a VCR. If the 4:3 picture format is used; the fixed images on the sides of the screen may remain visible on the screen. When connecting with an antenna cable 1 Connect the RF antenna out socket of the VCR to the Antenna socket on the set. 2 Connect the antenna cable to the RF antenna in socket of the VCR.
When connecting with an S-Video cable 1 Connect the an S-VIDEO output of the VCR to the S-VIDEO input on the set. The picture quality is improved; compared to connecting a regular VCR to the Video input. 2 Connect the audio outputs of the VCR to the AUDIO input jacks on the set. 3 Insert a video tape into the VCR and press PLAY on the VCR. (Refer to the VCR owner’s manual.) 4 Select S-Video input source with using the TV/AV button on the remote control.
Installation External Equipment Connections External DVD Setup When connecting with a component cable 1 Connect the video outputs (Y, PB, PR) of the DVD to the COMPONENT DVD IN (Y, PB, PR) jacks on the set. 2 Connect the audio outputs of the DVD to the AUDIO input jacks on the set. 3 Turn on the DVD player, insert a DVD. 4 Select Component1 input source with using the TV/AV button on the remote control. - If connected to COMPONENT2 IN select Component2 input source.
When connecting with a S-Video cable TV side panel 1 Connect the S-VIDEO output of the DVD to the S-VIDEO input on the set. 2 Connect the audio outputs of the DVD to the AUDIO input jacks on the set. 3 Turn on the DVD player, insert a DVD. 4 Select S-Video input source with using the TV/AV button on the remote control. 5 Refer to the DVD player's manual for operating instructions.
Installation External Equipment Connections DTV Setup When connecting with a component cable TV back panel 1 Connect the video outputs (Y, PB, PR) of the digital set-top box to the COMPONENT DVD IN (Y, PB, PR) jacks on the set. 2 Connect the audio outputs of the digital set-top box to the AUDIO input jacks on the set. 3 Turn on the digital set-top box. (Refer to the owner’s manual for the digital set-top box.) 4 Select Component1 input source with using the TV/AV button on the remote control.
PC Setup 1 Connect the TV to the PC with the PC cable. 2 Connect the PC audio output to the TV's PC SOUND input. 3 Turn on the PC. 4 Use the TV/AV button on the remote control to select PC. NOTE Connect the signal cable (DVI-D cable, Not DVI to D-Sub cable) from the DVI output socket of the PC to the DVI input socket of the set when using a PC with DVI output. In some video cards, DVI-Analog output may not be supported.
Operation Basic Operation Turning On/Off the TV TV/AV 1 POWER First, make all equipment connections. Connect the AC power cord into the TV, then plug the power cord into a wall outlet. Press the POWER button located on the TV to turn on the TV. The power indicator will light. EDIA MULTIM AUDIO AUDIO • In the standby mode, press the POWER, CH D / E, TV/AV, MULTIMEDIA or number buttons on the remote control to turn on the TV.
Operation How to adjust the OSD screen 1 Press the MENU button and then D / E button to display each menu. 2 Press the G button and then D / E button to select a menu item. 3 Change the setting of an item in the sub or pull-down menu with F / G button. You can move to the higher level menu by pressing the ENTER or MENU button. Channel EZ Scan Manual prog. Favorite ch.
Setting up TV stations Memorizing the Channels with EZ scan Channel Channel EZ Scan Manual prog. Favorite ch. D FG E OK MENU - For Auto program to work, the programming source must be connected to the TV and the TV must be receiving programming signals either overthe-air or from a cable-type service provider. EZ Scan Manual prog. Favorite ch. D FG E To start OK MENU 1 Press the MENU button and then use Channel menu.
Add/Delete Channels with Manual program Channel EZ Scan Manual prog. Favorite ch. Channel EZ Scan Manual prog. Favorite ch. D FG E D FG E OK MENU - You can manually include or erase individual channels. OK MENU TV Memory The current channel number is displayed. 30 EXIT 1 Press the MENU button and then use D / E button to select the Channel menu. 2 Press the G button and then use 3 Press the G button and then use want to add to memory or erase. D / E button to select Manual prog..
Picture Menu Options EZ Video Picture EZ Video User Cinema Picture EZ Video User Cinema D FG E D F E OK MENU - This function adjusts the TV for the best picture appearance. OPEN/CLOSE FCR EDIA MULTIM O eo id IDE VV STOP AUDIO OK MENU 1 Press the MENU button and then D / E button to select the Picture menu. 2 Press the G button and then D / E button to select EZ Video. 3 Press the G button and then D / E button to select a picture setting on the EZ Video menu.
Picture Menu Options Cinema Mode Setup Picture EZ Video User Cinema Picture EZ Video User Cinema D FG E D F E OK MENU - Sets up the TV for the best picture appearance for viewing movies. On Off OK MENU 1 Press the MENU button and then use D / E button to select the Picture menu. 2 Press the G button and then use D / E button to select Cimena. 3 Press the G button and then use D / E button to to select On or Off. 4 Press the ENTER button to save.
Sound Menu Options EZ Audio Sound EZ Audio AVL Balance D FG E Sound EZ Audio AVL Balance D FG E OK MENU - This function lets you enjoy the best sound without any special adjustment because the TV selects the appropriate sound option based on the program content. Flat Music Movie Sports User G OK MENU 1 Press the MENU button and then D / E button to select the Sound menu. 2 Press the G button and then D / E button to select EZ Audio.
Sound Menu Options AVL (Auto Volume Leveler) Sound EZ Audio AVL Balance Sound EZ Audio AVL Balance D F E D F E OK MENU - AVL (Auto Volume Leveler) maintains an equal volume level automatically even if the programme is changed. On Off OK MENU 1 Press the MENU button and then D / E button to select the Sound menu. 2 Press the G button and then D / E button to select AVL. 3 Press the G button and then use the D / E button to select On or Off. 4 Press the ENTER button to save.
Stereo/SAP Broadcasts Setup OPEN/CLOSE TV/AV EDIA MULTIM VIDEO STOP POWER FCR AUDIO CC AUDIO MTS MTS PLAY PAUSE/STEP REP EAT - The TV can receive MTS stereo programs and any SAP (Secondary Audio Program) that accompanies the stereo program, if the broadcaster transmits an additional sound signal as well as the original one. - Mono: The primary language is heard from left and right speakers. Signal mode is mono. - Stereo: The primary language is heard from left and right speakers.
T imer menu Options Auto Clock Setup Timer Timer Clock Off timer On timer Auto off Clock Off timer On timer Auto off D FG E OK MENU - The time can be automatically set using information from your local PBS TV station. The PBS channel signal includes information for the correct time and daylight savings time. D FG E Auto Clock Time zone Auto PBS Ch. TV 1 D.S.T. Auto G Auto Manual FG OK MENU 1 Press the MENU button and then use D / E Move D Adjust E EXIT button to select the Timer menu.
On/Off Timer Setup Timer Clock Off timer On timer Auto off D FG E Timer Clock Off timer On timer Auto off D FG E OK MENU - Timer function operates only if current time is set. - Off-Timer function overrides OnTimer function if they are set to the same time. - The TV must be in standby mode for the On-Timer to work. - If you don’t press any button within 2 hours after turning on the TV with the On-Timer function, the TV will automatically revert to standby mode.
T imer menu Options Auto off Timer Clock Off timer On timer Auto off D FG E OK MENU - If you select On on the Auto off menu, the set will automatically switch itself to standby mode approximately ten minutes after a TV station stops broadcasting. - In the Component, DVD or PC mode, Auto off is not available. 32 Timer Clock Off timer On timer Auto off D FG E On Off OK MENU 1 Press the MENU button and then D / E button to select the Timer menu.
Special Menu Options Closed Captions Closed captioning is a process which converts the audio portion of a television program into written words which then appear as subtitles on the television screen. Closed captions allow viewers to read the dialogue and narration of television programs. Using Closed Captions Captions are the subtitles of the dialogue and narration of television programs. For prerecorded programs, program dialogue can be arranged into captions in advance.
Special Menu Options Caption/Text Special Language Caption/Text Captions Key lock Parental Logo D FG E Special Language Caption/Text Captions Key lock Parental Logo D F E OK MENU CC1 CC2 CC3 CC4 Text1 Text2 Text3 Text4 OK MENU 1 Press the MENU button and then use D / E button to select the Special menu. 2 Press the G button and then use D / E button to select Caption / Text. 3 Press the G button and then use D / E button to select caption: CC1, CC2, CC3, CC4, Text1, Text2, Text3, or Text4.
Key Lock Special Language Caption/Text Captions Key lock Parental Logo Special Language Caption/Text Captions Key lock Parental Logo D FG E D F E OK MENU - The TV can be set up so that it can only be used with the remote control to prevent unauthorized viewing. On Off OK MENU 1 Press the MENU button and then D / E button to select the Special menu. 2 Press the G button and then D / E button to select Key lock. 3 Press the G button and then D / E button to select On or Off.
Special Menu Options Parental Menu Options Parental Control can be used to block specific channels, ratings and other viewing sources. The Parental Control Function (V-Chip) is used to block program viewing based on the ratings sent by the broadcast station. The default setting is to allow all programs to be viewed. Viewing can be blocked by the type of program and by the categories chosen to be blocked. It is also possible to block all program viewing for a time period.
PC Menu Options After setup, be sure to select PC source to see the PC image the on TV screen. Auto Configure PC H-Position V-Position Clock Phase Auto Configure Reset D FG E OK MENU - Automatically adjusts the screen position, clock, and phase. (The displayed image will disappear for a few seconds while Auto-configuration is in progress.) PC H-Position V-Position Clock Phase Auto Configure Reset D FG E To Set OK MENU 1 Press the MENU button and then use the D / E button to select the PC menu.
PC Menu Options Clock / Phase PC H-Position V-Position Clock Phase Auto Configure Reset D FG E OK MENU • Clock This function is to minimize any vertical bars or stripes visible on the screen background. And the horizontal screen size will also change. • Phase This function allows you to remove any horizontal noise and clear or sharpen the image of characters.
DVD operation Notes on Discs Symbol Used in this Manual DVD-V VCD On storing discs v Do not store discs in a place subject to direct sunlight or near heat sources. v Do not store discs in places subject to moisture and dust such as a bathroom or near a humidifier. v Store discs vertically in a case. Stacking or placing objects on discs outside of their case may cause warping.
DVD operation Notes on Discs Types of Playable Discs • DVD (8 cm / 12 cm disc) • Video CD (VCD) (8 cm / 12 cm disc) • Audio CD (8 cm / 12 cm disc) In addition, this unit plays DivX file, DVD -R, DVD +R, DVD -RW, DVD +RW, Kodak Picture CDs, SVCD, and CD-R / CD-RW that contains audio titles, MP3, WMA, and/or JPEG files.
DVD operation DVD Menu options - LANGUAGE By using the DVD menu, you can make various adjustments to items such as picture and sound. You can also set a language for the subtitles and the DVD menu, among other things. Menu Language LANGUAGE Menu MenuLanguage Language G Disc Audio Disc Subtitle English Spanish French Disc Menu F Prev. - Select your preferred language for the DVD menus and on screen displays messages. D E Move G Select the MENU button twice and then use the D 1 Press Language.
DVD operation DVD Menu options - DISPLAY Progressive Scan DISPLAY - Progressive Scan Video provides the highest quality pictures with less flickering. Set Progressive Scan to On. 42 Progressive ProgressiveScan Scan G F Prev. D E On Off Move G Select 1 Press the MENU button twice and then use the D / E button to select DISPLAY. 2 Press the G button to select Progressive Scan. 3 Press the G button and then use D / E button to select On or Off. 4 Press the ENTER button.
DVD operation DVD Menu options - AUDIO Each DVD disc has a variety of audio output options. Set the player’s AUDIO options according to the type of audio system you use. Dolby Digital / DTS / MPEG DVD-V DivX AUDIO Dolby Digital G DTS Bitstream PCM MPEG Sample Freq. DRC Vocal F Prev. • Bitstream: Select Bitstream if you connect the DVD Player’s DIGITAL OUT jack to an amplifier or other equipment with a Dolby Digital, DTS or MPEG decoder.
DVD operation DVD Menu options - AUDIO DRC (Dynamic Range Control) DVD-V DivX AUDIO Dolby Digital DTS MPEG Sample Freq. DRC G Vocal F Prev. - With the DVD format, you can hear a program’s soundtrack in the most accurate and realistic presentation possible, thanks to digital audio technology. However, you may wish to compress the dynamic range of the audio output (the difference between the loudest sounds and the quietest ones).
DVD operation DVD Menu options - LOCK Rating LOCK Rating LOCK G Password Area Code F Prev. DVD-V D E Unlock 8 (Adult) 7 6 5 4 3 2 1 (Kids) Move G Rating Area Code Select - Some movies contain scenes that may not be suitable for children to view. Many of these discs contain parental control information that applies to the complete disc or to certain scenes on the disc. Movies and scenes are rated from 1 to 8, depending on the country. Some discs offer more suitable scenes as an alternative.
Password (Security Code) LOCK LOCK Rating Rating Password G Password Change F Prev. New Password Area Code Area Code D E Move G CLEAR Select OK F Clear Delete 0-9 Input 1 Press the MENU button twice and then use the D - You can enter or change password. / E button to select LOCK. 2 Press the G button and then use D / E button to select Password. the G and ENTER button. 3 Press In case of “New” Input a 4-digit password and press OK button.
DVD operation DVD Menu options - OTHERS PBC VCD OTHERS PBC G Auto Play On Off B.L.E DivX(R) VOD F Prev. - Set Playback Control (PBC) to On or Off. On: Video CDs with PBC are played according to the PBC. Off: Video CDs with PBC are played the same way as Audio CDs. D E Move G Select 1 Press the MENU button twice and then use the D / E button to select OTHERS. 2 Press the G button and then use D / E button to select PBC. 3 Press the G button and then use D / E button to select On or Off.
DVD operation DVD Menu options - OTHERS B.L.E (Black Level Extension) OTHERS PBC Auto Play B.L.E B.L.E G DivX(R) VOD F Prev. - Use it to extend the darkness part on the dark ness part on the screen. 48 D E On Off Move G Select 1 Press the MENU button twice and then use the D / E button to select OTHERS. 2 Press the G button and then use D / E button to select B.L.E. 3 Press the G button and then use D / E button to select On or Off. 4 Press the ENTER button.
DivX(R) VOD DVD-V OTHERS PBC DivX(R) Video on demand Auto Play B.L.E DivX(R) VOD Your registration code is : XXXXXXXX Select G To lern more visit www.divx.com.vod (Done) F Prev. D E Move G Select - You can show the DivX DRM (Digital Right Management) Registration code for your unit only. The Registration code is used for VOD (Video-On-Demand) service agent. You can purchase or rental an encrypt movie file. 1 Press the MENU button twice and then use the D / E button to select OTHERS.
DVD operation Playing a DVD or V ideo CD Basic Playback OPEN/CLOSE POWER DVD-V VCD DivX 1 Press the POWER button to turn the unit on. 2 Press OPEN/CLOSE button to open the disc tray and load your chosen disc in the tray, with the playback side down. 3 Press OPEN/CLOSE button to close the tray. Playback starts automatically. If playback does not start, press G PLAY button.
Slow Motion DVD-V VCD DivX Press II PAUSE/STEP button on the remote control during playback. 1 The DVD player will now go into PAUSE mode. OPEN/CLOSE STOP SKIP PLAY PAUSE/STEP REP EAT SCAN SCAN 2 Use the FF SCAN or GG SCAN button to select the required speed: F I 1/16, F I 1/8, F I 1/4, or F I 1/2 (backward), or I G 1/16, I G 1/8, I G 1/4, or I G 1/2 (forward). With a DivX Disc and Video CD, the Slow speed changes: I G 1/16, I G 1/8, I G 1/4 or I G 1/2 (forward).
DVD operation Playing a DVD or V ideo CD Disc Menu DVD-V 1 Press the DISC MENU button during playback. 2 Use the D / E / F / G button or ENTER button to select the desired menu option. Title Menu DVD-V 1 Press the TITLE button during playback. 2 Use the D / E / F / G button or ENTER button to select the desired item. Note ENTER a. DISC ME 52 NU TIT LE DIS PL AY The unit may not be able to select the disc or title menu depending on a sort of DVD disc.
On-Screen Display 1 Press DISPLAY button during playback. 2 Use D / E button to select an item. 3 Press F / G button to change the setting. You can also use the number buttons if appropriate (e.g. inputting the title number). For some functions, press ENTER to execute the setting. Some discs may not provide all of the features shown below.
DVD operation Playing a DVD or V ideo CD A-B Repeat Playback DVD-V VCD DivX - A-B repeat playback allows you to repeat material between two selected points. Press the A-B button to select the start point during playback. “ A * ” is dis1 played on the TV screen and the starting point of your selected segment is set up. Press the A-B button again to select the end point. “ 2 the TV screen and the ending point is set up. AB” is displayed on Playback starts at the point that you selected.
Subtitles DVD-V DivX 1 Press SUB_T button repeatedly during playback to see the different subtitle languages. If a subtitle language is selected, the selected subtitle language is played whenever you start a new disc playback. (The disc must contain the selected language) Note a. The subtitle file of the DivX file is displayed only smi, srt and sub. b. If there is no information or there is a code that can not read in the DivX file, “ 1 ” etc are displayed.
DVD operation Playing an Audio CD or MP3/WMA Disc - The DVD player can play MP3/WMA formatted recordings on CD-ROM, CD-R, or CD-RW discs. A Audio CD A CD 1. Once you insert an audio CD a menu appears on the TV screen. 2. Press D / E button to select a track then press G PLAY or ENTER button. Playback starts. MP3 / WMA WMA 1. Press D / E button to select a folder, and press ENTER button to see the folder contents. 2. Press D / E button to select a track then press G PLAY or ENTER button.
Repeat Playback CD MP3 WMA - You can play a track/all on a disc. 1 Press the GIF REPEAT button during playback. 2 Each time you press the GIF REPEAT button, the repeat mode changes as follows. Track → All → (Off) • If you press GGI SKIP button once during repeat track playback, the repeat playback cancels. A-B Repeat Playback CD - A-B repeat playback allows you to repeat material between two selected points. 1 Press the A-B button to select the start point during playback.
DVD operation Programmed Playback - The program function enables you to store your favorite tracks from any disc in the player memory. A program can contain 30 tracks. 1 Insert a disc. 2 Press PROGRAM button. The E mark will appear to the right of the word Program on the right side of the menu screen. • Press PROGRAM button again, then the E mark will disappear to exit the Program Edit mode.
V iewing a JPEG Disc - Using this DVD Player you can view Kodak PICTURE CDs and discs with JPEG files. 1 Insert a disc and close the tray. The PHOTO menu appears on the TV screen. PHOTO List JPEG Folder 1 JPEG Folder 2 JPEG Folder 3 JPEG Folder 4 JPEG Folder 5 JPEG Folder 6 JPEG Folder 7 JPEG Folder 8 Preview E 2 Press D / E button to select a folder, and press ENTER button. A list of files in the folder appears.
DVD operation V iewing a JPEG Disc A To listen to MP3/WMA music watching picture You can display files while listening to MP3/WMA music files recorded on the same disc. 1. Insert the disc containing the two types of file in the player. 2. Press TITLE button to display PHOTO menu. 3. Press D / E button to select a photo file. 4. Use G button to select icon then press ENTER button. Playback starts. The playback will continue until A STOP button is pressed.
Playing a DivX Movie Disc - Using this DVD Player you can play DivX (Digital Internet Video eXpress) disc. 1 Insert a disc and close the tray. The MOVIE menu appears on the TV screen. MOVIE A 0 : 00 : 00 List Movie Folder 1 Movie Folder 2 Movie Folder 3 Movie Folder 4 Movie Folder 5 Movie Folder 6 Movie Folder 7 Movie Folder 8 Data Duration E 2 Press D / E button to select a folder, and press ENTER button. A list of files in the folder appears.
Reference Language Codes Use this list to input your desired language for the following initial settings: Disc Audio, Disc Subtitle, Disc Menu.
Reference Troubleshooting Checklist The operation does not work normally. The remote control doesn’t work • Check to see if there is any object between the product and the remote control causing obstruction. • Are batteries installed with correct polarity (+ to +, - to -)? • Correct remote operating mode set: TV, VCR etc.? • Install new batteries. Power is suddenly turned off • Is the sleep timer set? • Check the power control settings.
Reference Troubleshooting Checklist The audio function does not work. Picture OK & No sound No output from one of the speakers Unusual sound from inside the product • Press the VOL (or Volume) button. • Sound muted? Press MUTE button. • Try another channel. The problem may be with the broadcast. • Are the audio cables installed properly? • Adjust Balance in menu option.
Reference Maintenance - Early malfunctions can be prevented. Careful and regular cleaning can extend the amount of time you will have your new TV. Be sure to turn the power off and unplug the power cord before you begin any cleaning. Cleaning the Screen 1. Here’s a great way to keep the dust off your screen for a while. Wet a soft cloth in a mixture of lukewarm water and a little fabric softener or dish washing detergent. Wring the cloth until it’s almost dry, and then use it to wipe the screen. 2.
Memo 66
Memo 67
